{"title":"Hand Tools","description":"\u003cp\u003ePrecision hand tools engineered for control and comfort. Turn, grip, and fasten with confidence on every job, from the garage to the workbench.\u003c\/p\u003e","products":[{"product_id":"electrical-connector-pliers","title":"Electrical Connector Pliers — Angled, Straight \u0026 Release Tool for Car Wiring","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStop breaking the tab\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe connector comes off. The clip stays on.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eEvery automotive plug has a small plastic tab holding it shut, and every one of them is somewhere your fingers do not fit. A screwdriver reaches it and snaps it. These three tools reach it and lift it — a hooked tip to pop the tab, a jaw to grip the plug body, and a pull that comes straight back instead of sideways.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Saba101efb0a34ee0b5fad8b9a2324ae9M.webp\" alt=\"The three tools: 60 degree angled pliers, straight pliers and the double-ended release bar\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 52px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S620da383a254401799f8ecf3e3a8a6c0m.webp\" alt=\"Serrated upper jaw and hooked lower jaw closing on a black automotive connector\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eHow it actually works\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eHook the tab first, then pull\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe lower jaw ends in a thin hook. Slide it under the locking tab and lift — that is the step people skip, and it is why tabs break. Once the lock is clear, the serrated upper jaw grips the plug body and you draw it straight off the pin.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth jaws work on the connector, never on the wire loom. Nothing gets levered against the sensor housing.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThree tools, three reaches\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eThe angle is the whole point\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eThey do the same job in different geometry. Which one you need depends entirely on where the connector is buried, which is why the set exists — but each is sold on its own if you already know the one you want.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:20px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:14px;padding:24px\"\u003e\n    \u003ch3 style=\"font-size:17px;font-weight:600;margin:0 0 8px\"\u003eAngled 60° pliers · 5.7 in\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px\"\u003eShort body, head kicked over 2.56 in. This is the one for a connector facing away from you, down beside the block or behind a bracket.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:14px;padding:24px\"\u003e\n    \u003ch3 style=\"font-size:17px;font-weight:600;margin:0 0 8px\"\u003eStraight pliers · 8.1 in\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px\"\u003eLong and slim, jaws in line with the handles. For plugs at the bottom of a gap where the only approach is straight down.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:14px;padding:24px\"\u003e\n    \u003ch3 style=\"font-size:17px;font-weight:600;margin:0 0 8px\"\u003eRelease bar · 7.5 in\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px\"\u003eNo jaws at all — a fork at each end, 0.39 in across. Slides between the plug halves and pushes them apart where no plier will fit.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#1E2532;border-radius:14px;padding:32px 30px;margin:0 0 52px;color:#F4F5F6\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eIf you are not sure which one\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px;color:#FFFFFF\"\u003eTake the set — it costs about a fifth less than the three bought separately\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 14px;color:#D7DBE0\"\u003eThe three are not alternatives to each other. They are three different reaches, and which one a job needs is decided by where the connector sits — not by preference. Buy one and there is a fair chance the next plug you meet is the one it cannot get to.\u003c\/p\u003e\n\u003cp style=\"margin:0;color:#D7DBE0\"\u003eThe struck-through figure beside the price of the set is the real total of the three single options on this page. Add them up yourself — that is the whole argument.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S396cec62a5bd4a28b51ad1753376dae3U.webp\" alt=\"The double-ended release bar separating a connector in an engine bay\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe one people forget\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe release bar is not a spare part\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eIt looks like the throwaway item in the set and it is the one most mechanics reach for. Both ends are forks, so you work it in flat between the two halves of a plug and lever them apart — in gaps where a pair of pliers simply cannot open.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eIt is also the safest on brittle plastic: the load spreads across the fork instead of pinching on two points.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S3b3a83cc5f8c4f1dacf9124405d442deM.webp\" alt=\"Close-ups of the serrated head, the return spring and the non-slip handle\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat the pliers are made of\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eSerrated jaw, return spring, dipped grip\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe jaws are cut with fine serrations so a rounded plug body does not slip out under a hard pull, and the manufacturer specifies high-carbon steel for the forged parts — no hardness figure is published, so we are not printing one.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eA coil spring between the handles springs them open again, which matters when one hand is holding the plug and the other is doing everything else. The grips are dipped rather than moulded — less comfortable than a proper bi-material handle, and honest to say so.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eBefore you buy\u003c\/p\u003e\n  \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 12px\"\u003e\u003cstrong\u003eThese are for plastic connectors, not for gripping metal.\u003c\/strong\u003e The manufacturer’s own spec sheet says “suitable for: non-metal”. The jaws are shaped and serrated for plug housings. Use them as general pliers on a nut or a bolt and you will spring the jaws.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 12px\"\u003e\u003cstrong\u003eNo connector will come apart if you have not released the lock.\u003c\/strong\u003e That is true of every tool ever made for this job. Find the tab, lift it, then pull. If a plug resists after the lock is clear, it is corroded — more force breaks it.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eUnbranded, and sold as such.\u003c\/strong\u003e There is no brand behind these, no torque or hardness rating published, and no manufacturer warranty. What stands behind them is our own 30-day return window.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S9b17e90a3af4400e9b0d5d792c3c9e47u.webp\" alt=\"Four scenes showing the pliers used on wiring in different parts of an engine bay\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhere they come out\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eAnything that plugs in under a bonnet\u003c\/h2\u003e\n    \u003cul style=\"margin:0;padding-left:20px\"\u003e\n      \u003cli style=\"margin-bottom:8px\"\u003e\n\u003cstrong\u003eIgnition coils and spark plug packs\u003c\/strong\u003e — the classic buried connector on a plug change.\u003c\/li\u003e\n      \u003cli style=\"margin-bottom:8px\"\u003e\n\u003cstrong\u003eFuel injectors\u003c\/strong\u003e — tight, hot, and the tabs go brittle with age.\u003c\/li\u003e\n      \u003cli style=\"margin-bottom:8px\"\u003e\n\u003cstrong\u003eAir flow and oxygen sensors\u003c\/strong\u003e — usually facing the wrong way, which is what the 60° head is for.\u003c\/li\u003e\n      \u003cli style=\"margin-bottom:8px\"\u003e\n\u003cstrong\u003eHeadlights and indicators\u003c\/strong\u003e — a bulb change that would otherwise mean taking the whole housing out.\u003c\/li\u003e\n      \u003cli style=\"margin-bottom:0\"\u003e\n\u003cstrong\u003eAny loom on a bike, van or ride-on mower\u003c\/strong\u003e — the plugs are the same design everywhere.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S6f192c9251c6458fa097904a217c37daG.webp\" alt=\"Measured drawing of all three tools with lengths marked\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 52px\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMeasurements\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 18px\"\u003eThe specifics\u003c\/h2\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;margin:0 0 52px;font-size:15px\"\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;width:42%;color:#5A6472\"\u003eAngled pliers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003e5.71 in overall  ·  head offset 2.56 in  ·  60° bend\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eStraight pliers\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003e8.07 in overall\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eRelease bar\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003e7.48 in overall  ·  fork opening 0.39 in, both ends\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003eHigh-carbon steel as stated by the manufacturer. No hardness rating published.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eJaws\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003eSerrated upper, hooked lower, coil return spring\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eHandles\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003eDipped non-slip coating\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eIntended for\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003ePlastic automotive connectors. The maker lists it as “non-metal” use.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA;color:#5A6472\"\u003eIn the box\u003c\/td\u003e\n\u003ctd style=\"padding:12px 0;border-bottom:1px solid #E3E6EA\"\u003eWhichever option you pick above, and nothing else — no case, no printed manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eGood to know\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 18px\"\u003eQuestions people ask\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 52px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich one should I buy if I only want one?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe angled 60° pliers. Most of the connectors that defeat fingers are ones facing away from you, and the offset head is what gets round them. If your problem is specifically a plug in a deep narrow gap, take the straight pair instead.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill these fit my car?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThey are not vehicle-specific. Automotive connectors follow a handful of common patterns across nearly every make, and these are shaped for those patterns rather than for one brand’s plugs.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use them on a live circuit?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eDo not. These are bare steel with a dipped grip, not insulated VDE tools, and nothing about them is rated for live work. Disconnect the battery before you go near the loom — that is good practice regardless of tooling.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill the serrations mark the plastic?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThey can leave light witness marks on a soft housing if you squeeze hard. That is the trade for not slipping. Grip firmly enough to hold and let the pull do the work, rather than crushing the plug.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the release bar any use on interior trim?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePeople do use forked bars like this for panel clips, and it will work in a pinch. It is steel with a fairly sharp fork, so on a visible trim panel a proper plastic trim tool is kinder to the finish.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Release bar only","offer_id":44046065533018,"sku":"NX-DISCPLIER-BAR","price":17.95,"currency_code":"USD","in_stock":true},{"title":"3-piece set — best value","offer_id":44046065467482,"sku":"NX-DISCPLIER-SET","price":60.95,"currency_code":"USD","in_stock":true},{"title":"Angled 60° pliers only","offer_id":44046206140506,"sku":"NX-DISCPLIER-ANGLE","price":31.95,"currency_code":"USD","in_stock":true},{"title":"Straight pliers only","offer_id":44046206173274,"sku":"NX-DISCPLIER-STRAIGHT","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-electrical-connector-pliers.jpg?v=1789126022"},{"product_id":"tool-waist-pouch-work-belt","title":"Tool Waist Pouch \u0026 Work Belt — Oxford Pouch with Hammer Loop and Tape Clip","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe walk back to the toolbox\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eKeep the fasteners on your hip.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eHalf the time lost on a job is walking — back to the bench for one more screw, back again for the driver you set down. This is an Oxford cloth pouch that rides on your belt and carries the small stuff with you: fasteners in the main pocket, drivers in the sleeves across the mouth, a hammer through the loop, a tape on the clip.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-hero.jpg\" alt=\"Tool waist pouch worn on the hip, loaded with a wrench, screwdrivers, a hammer and a tape measure\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eOxford cloth\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eCoated inner face, double-stitched base\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eHangs, not threads\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eOn and off without unbuckling\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eHammer loop \u0026amp; tape clip\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eBoth hands free when you need them\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e25 cm, 0.56 kg\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eEmpty weight of the TSK-24 pouch\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-20.jpg\" alt=\"Open tool pouch filled with screws, wall plugs and small fasteners\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat goes in it\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eOne deep pocket, and places for the things that fall out of it\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe main compartment takes a fistful of screws, plugs and clips without them sorting themselves into the bottom corner of a trouser pocket. In front of it sit narrow sleeves sized for drivers, a pencil and a marker, so the tool you use every two minutes is not buried under the fasteners.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eOn the outside there is a loop for a hammer and a clip for a tape measure — the two things that are always in your other hand when you need both hands.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eA closer look at the TSK-24\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003ePocket by pocket\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 320px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-00.jpg\" alt=\"Front of the tool pouch showing the sleeve row, the front pocket, the riveted tape clip and the side pockets\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 380px\"\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:0 0 14px;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e1\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eMain compartment\u003c\/strong\u003e — 20 cm across the mouth, 11 cm deep at the base. This is the one that holds fasteners by the handful.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:14px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e2\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eSleeve row across the mouth\u003c\/strong\u003e — narrow slots about 3 cm wide for drivers, a pencil, a marker or a utility knife, standing upright where you can see them.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:14px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e3\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eFront pocket with the tape clip\u003c\/strong\u003e — a flat outer pocket with the moulded tape-measure clip riveted straight through it, so the clip pulls against hardware rather than cloth.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:14px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e4\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eA slim pocket on each side\u003c\/strong\u003e — the places pliers, a folding knife or a phone end up when your hands are full.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:14px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e5\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eHammer loop\u003c\/strong\u003e — a reinforced loop on the side, cut wide for a framing or claw hammer handle.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"display:flex;gap:16px;padding:14px 0\"\u003e\n\u003cdiv style=\"flex:0 0 26px;height:26px;border-radius:8px;background:#E5622A;color:#fff;text-align:center;font-weight:700;font-size:14px;line-height:26px\"\u003e6\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eMoulded belt hanger on the back\u003c\/strong\u003e — hooks over the belt, with metal eyelets through the back panel taking the load.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eFour parts, or four ready-made sets\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003ePick the part you are missing\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eThis listing covers two pouch sizes and two belts, sold on their own or paired into a set. The pouches hang on a belt you already own, or on one of these. Read the option name before you order — a belt option is a belt on its own, with no pouch.\u003c\/p\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:30px;margin:0 0 20px\"\u003e\n  \u003cdiv style=\"flex:1 1 300px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-17.jpg\" alt=\"Mini tool pouch, front view\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eMini pouch · TSK-25\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003e19 × 25 cm. One main pocket, front sleeves for drivers, quick-hook hanger. The one to take when you are carrying a handful of screws and a driver, not a kit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 300px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-00.jpg\" alt=\"Small tool pouch with multiple front pockets, hammer loop and tape clip\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eSmall pouch · TSK-24\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003e25 cm tall on an 18.5 × 11 cm base, about 0.56 kg empty. More front pockets, the hammer loop and the tape clip, and one clip-on buckle in the box.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:30px;margin:0 0 32px\"\u003e\n  \u003cdiv style=\"flex:1 1 300px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-23.jpg\" alt=\"Padded work belt with quick-release buckle\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003ePadded belt · TSK-41B\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eA wide belt with a padded back panel and a quick-release buckle. Worth it if the pouch is going to be loaded and on you all day.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 300px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-24.jpg\" alt=\"Flat webbing work belt with quick-release buckle\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eWebbing belt · TSK-42\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eFlat webbing, same quick-release buckle, no padding. Lighter, thinner, and the cheaper way to hang a pouch on your waist.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 12px\"\u003eMini or small — the difference in one table\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;margin:0 0 52px\"\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;min-width:520px\"\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003cth style=\"text-align:left;padding:12px 10px 12px 0;font-weight:600;width:34%\"\u003e\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:12px 10px;font-weight:600\"\u003eMini · TSK-25\u003c\/th\u003e\n\u003cth style=\"text-align:left;padding:12px 10px;font-weight:600\"\u003eSmall · TSK-24\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eSize\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003e19 × 25 cm\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003e25 cm tall, 20 cm across the mouth, 18.5 × 11 cm base\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eFront sleeves\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYes, plus a front pocket and a pocket on each side\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eHammer loop\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eTape clip\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYes, riveted through the front pocket\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eWeight empty\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eLighter — the maker does not publish a figure\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eAbout 0.56 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:12px 10px 12px 0;color:#5A6472\"\u003eTake it if\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYou want screws and a driver on you and nothing more\u003c\/td\u003e\n\u003ctd style=\"padding:12px 10px\"\u003eYou want it to behave like a proper tool pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSets\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eOr take the whole rig at once\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eA pouch on its own still needs something to hang from. These four sets pair the parts that actually go together, ship as one order, and each one saves you about 15% against the same two pieces bought separately. Pick the set from the same dropdown as the single parts.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 230px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-light-rig.jpg\" alt=\"Light Rig set: mini tool pouch and webbing work belt\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003eLight Rig\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eMini pouch + webbing belt. The smallest way to get fasteners and a driver onto your waist.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-starter-rig.jpg\" alt=\"Starter Rig set: small tool pouch and webbing work belt\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003eStarter Rig\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eSmall pouch + webbing belt. The everyday pairing: hammer loop, tape clip and a belt to carry them.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-two-pouch.jpg\" alt=\"Two-Pouch Set: small tool pouch and mini tool pouch\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003eTwo-Pouch Set\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eBoth pouches, no belt — for when you already wear one and want fasteners on one hip, tools on the other.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-all-day-rig.jpg\" alt=\"All-Day Rig set: small tool pouch and padded work belt\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003eAll-Day Rig\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eSmall pouch + padded belt. The one to take if the pouch is loaded and stays on you for a full shift.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOn and off\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eIt hangs on the belt, not through it\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe pouch hooks over a belt or a waistband rather than threading onto it, so it comes off when you sit in the van and goes back on when you get out. You do not have to unbuckle anything to move it round to the back, and you can wear it on whichever hip you reach with.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe TSK-24 comes with one clip-on buckle, so you can leave the hanging point on a belt and lift the pouch off it.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth belts close with the same quick-release buckle: one squeeze off, one push on, no threading through a tongue. Both are adjustable webbing.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-12.jpg\" alt=\"Side view of the tool pouch showing the belt hanger and hammer loop\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhere it earns its keep\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFour jobs it saves you walking for\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:20px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 230px;border:1px solid #E3E6EA;border-radius:14px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eHanging doors and cabinets\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#5A6472\"\u003eHinges, screws and the driver stay with you on the step stool instead of on the floor two rooms away.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px;border:1px solid #E3E6EA;border-radius:14px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eDrywall and fixings\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#5A6472\"\u003ePlugs in the main pocket, marker and tape where you can grab them one-handed.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px;border:1px solid #E3E6EA;border-radius:14px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eFlat-pack and repairs at home\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#5A6472\"\u003eAll the small hardware in one place, and nothing vacuumed up off the carpet afterwards.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 230px;border:1px solid #E3E6EA;border-radius:14px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eLadder and roof work\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#5A6472\"\u003eClimb once. The hammer rides in the loop and both hands stay on the stiles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNo tools are included.\u003c\/strong\u003e The hammer, screwdrivers and tape measure in the photographs are there to show what fits. You are buying the pouch, or the belt, and nothing else.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe hammer loop is generous.\u003c\/strong\u003e It is cut for a framing or claw hammer. A small finishing hammer with a slim handle can slide through it if you lean over — buyers have said so, and it is worth knowing before you trust it on a ladder.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eIt is a hip pouch, not a rig.\u003c\/strong\u003e One pouch on one side, for the job in front of you. If you need a full apron with a nail bag on each hip, this is not that.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMade of\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eOxford cloth, double-stitched where it takes the weight\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 18px\"\u003eThe body is Oxford cloth with a coated inner face, and the seams along the base and the belt hanger are stitched twice — those are the two places a loaded pouch pulls apart first. The front sleeves are reinforced at the mouth so they keep their shape after a few hundred insertions of a screwdriver.\u003c\/p\u003e\n\u003cp style=\"max-width:780px;margin:0 0 52px\"\u003eThe back panel carries metal eyelets rather than stitching alone, the tape clip is riveted through both layers, and the base is finished with a moulded trim so the corner that scrapes concrete is not raw cloth. The hardware — buckle, hanger, tape clip — is moulded plastic, which is what keeps an empty pouch down at half a kilo.\u003c\/p\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eLooking after it\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eIt will outlast the job if you empty it\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 52px\"\u003eTip the grit out at the end of the week — sharp swarf left in the bottom is what wears a pouch through from the inside. Wipe the cloth with a damp rag and mild soap; do not put it in a washing machine, and do not put it near a heater to dry. If it gets soaked, empty it and stand it open until it is dry, so damp screws are not sitting in the corner.\u003c\/p\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and materials\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMini pouch (TSK-25)\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e19 × 25 cm, Oxford cloth, quick-hook hanger\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eSmall pouch (TSK-24)\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e25 cm tall, 20 cm across the mouth, 18.5 × 11 cm base, about 0.56 kg empty\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eSleeve width\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAbout 3 cm — driver, pencil, marker, utility knife\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003ePadded belt (TSK-41B)\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eWide belt, padded back panel, quick-release buckle\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eWebbing belt (TSK-42)\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFlat webbing, quick-release buckle, no padding\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOxford cloth, coated inner face; moulded plastic buckle, hanger and tape clip; metal eyelets\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eColour\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eBlack with orange trim\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne pouch (TSK-24 includes one clip-on buckle), or one belt — whichever option you choose. No tools.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-spec-24.jpg\" alt=\"Dimension diagram of the TSK-24 tool pouch: 25 cm tall, 18.5 cm wide, 11 cm deep\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it come with the hammer and screwdrivers?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The tools in the photographs show what the pouch is sized for. Every option here is either the pouch on its own or the belt on its own.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit the belt I already wear?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt hangs over a belt or a waistband rather than threading through it, so an ordinary work belt or jeans belt is fine. A very wide, very stiff belt is the one case where the hanger sits proud instead of flat.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich pouch should I get?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eTake the mini (TSK-25) if you carry fasteners and one or two drivers. Take the small (TSK-24) if you want the hammer loop, the tape clip and the extra front pockets — it is the one that behaves like a proper tool pouch.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is in a set, and is it cheaper?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eEach set is exactly the two items named in the option — nothing extra, and still no tools. Every set is about 15% cheaper than the same two pieces bought separately at their own prices, and it ships as one order rather than two.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat waist do the belts fit?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBoth are adjustable webbing with a quick-release buckle, which covers the usual range of work waists. The maker does not publish a cut length, and we would rather not invent one — if the exact figure decides it for you, email us and we will get it from them before you order.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eLeft hip or right hip?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eEither. The hanger is symmetrical, so you can move the pouch round to whichever side your reaching hand prefers, or swing it to the back when you are getting into a vehicle.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I hang two pouches on one belt?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePhysically, yes — the belts are plain webbing and the hangers clip anywhere along them. Just remember each pouch is weight on one hip, and two loaded pouches on a flat webbing belt will pull. That is the case for the padded belt.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I wear the pouch without a belt at all?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt needs something to hang from. A trouser waistband works for light loads; once the pouch is full, a belt takes the weight far better and stops it dragging your waistband down.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it waterproof?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. Oxford cloth shrugs off a splash and a light drizzle, but it is not a dry bag. If it gets soaked, empty it and let it dry open rather than leaving damp screws inside.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I put a cordless driver in it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eA compact 12 V driver sits in the main pocket head-down if the pouch is not already full of fasteners. A full-size 18 V drill is too tall and too heavy for a pouch this size.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow do I clean it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eEmpty it, tip out the grit, then wipe it with a damp cloth and mild soap. Keep it out of the washing machine and away from direct heat — both will take the shape out of the coated cloth.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Webbing belt · TSK-42","offer_id":44053958721626,"sku":"NX-TOOLBELT-WEB","price":31.95,"currency_code":"USD","in_stock":true},{"title":"Mini pouch · TSK-25","offer_id":44053958754394,"sku":"NX-TOOLPOUCH-MINI","price":54.95,"currency_code":"USD","in_stock":true},{"title":"Padded belt · TSK-41B","offer_id":44053958688858,"sku":"NX-TOOLBELT-PAD","price":66.95,"currency_code":"USD","in_stock":true},{"title":"Small pouch · TSK-24","offer_id":44053958787162,"sku":"NX-TOOLPOUCH-SMALL","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Light Rig · TSK-25 + TSK-42","offer_id":44054074294362,"sku":"NX-TOOLSET-LIGHT","price":72.95,"currency_code":"USD","in_stock":true},{"title":"Starter Rig · TSK-24 + TSK-42","offer_id":44054074327130,"sku":"NX-TOOLSET-STARTER","price":95.95,"currency_code":"USD","in_stock":true},{"title":"Two-Pouch Set · TSK-24 + TSK-25","offer_id":44054074359898,"sku":"NX-TOOLSET-TWOPOUCH","price":115.95,"currency_code":"USD","in_stock":true},{"title":"All-Day Rig · TSK-24 + TSK-41B","offer_id":44054074392666,"sku":"NX-TOOLSET-ALLDAY","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-toolpouch-hero.jpg?v=1789199681"},{"product_id":"flush-cutters-170-micro-side-cutters","title":"170 Flush Cutters — SK5 Micro Side Cutters for Wire, Component Legs and 3D Prints","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe cut that sits flat\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eFor the trim a big pair of cutters ruins.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eSide cutters built for small work: component legs on a populated board, a zip tie flush against a loom, the support scars on a fresh 3D print, a sprue gate on a model kit. One jaw face is ground nearly flat, so the cut lands close to the surface instead of leaving a stub you have to go back and file.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-inuse.jpg\" alt=\"Flush cutters trimming a bundle of fine wires held in one hand\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSK5 carbon steel\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eHardened jaws, HRC 50 ±3\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eMax 1 mm copper\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe limit moulded on the handle\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSpring return\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eOpens itself between cuts\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e132 mm long\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThin enough for a shirt pocket\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-uses.jpg\" alt=\"Four jobs: trimming a cable tie, beadwork, cutting ribbon cable, trimming component legs on a circuit board\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it is for\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eSmall, soft and close to the surface\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe head is 32 mm across with an 18 mm jaw and a 6 mm cutting edge — narrow enough to get between a capacitor and the header next to it, which is the whole reason a shop keeps a pair of these next to the iron rather than reaching for lineman's pliers.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eHobby benches use them the same way: sprue gates on a model kit, brim and support scars on a print, thread and beading wire, the tag end of a cable tie that would otherwise catch a knuckle every time you reach past it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eRead this before anything else\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eOne millimetre of copper. That is the number.\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 360px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe maker moulds the rating straight into the handle: \u003cstrong\u003eMAX .040\" (1 mm) DIA. COPPER WIRE\u003c\/strong\u003e. That is the honest working limit of a hardened, thin-ground jaw, and it is the line between a tool that stays sharp for years and one you chip on the first job.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eInside that line: copper and tinned copper, component legs, plastic sprue and supports, cable ties, thread, soft beading wire. Outside it: steel or piano wire, nails, screws, spring steel, hardened anything. A cutter ground this fine does not argue with hard metal — it takes a notch out of the edge, and the notch never comes back.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe other line moulded on the handle is \u003cstrong\u003eUSE SAFETY GLASSES\u003c\/strong\u003e, and it is there for a reason. Offcuts leave a spring-loaded jaw fast and they leave it sideways. Cup your free hand over the cut or wear glasses — cheap habit, cheap insurance.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 300px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-handle-detail.jpg\" alt=\"Labelled view of the cutters: knife edge hardness HRC 50 plus or minus 3, SK5 material, spring design, TPR handle\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eFour pack sizes\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBuy one, or stop hunting for one\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eThese are consumables more than heirlooms. A bench that does daily trimming goes through edges; a repair shop with three stations wants three pairs so nobody walks. The larger packs exist for that, not as a novelty — and they cost less per pair.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 220px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-single.jpg\" alt=\"Single pair of 170 flush cutters\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003e1 pair\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eOne pair for the drawer, or a try-before-you-commit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-pack-5.jpg\" alt=\"Five pairs of 170 flush cutters\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003e5 pairs\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eA home bench, a print farm, or one per toolbox across a small crew.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-pack-10.jpg\" alt=\"Ten pairs of 170 flush cutters\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003e10 pairs\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eWorkshop stock. Put a fresh pair out when an edge goes and bin the old one.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-pack-20.jpg\" alt=\"Twenty pairs of 170 flush cutters\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 12px\"\u003e\n    \u003ch3 style=\"font-size:18px;font-weight:600;margin:0 0 6px\"\u003e20 pairs\u003c\/h3\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eClassroom, makerspace or production line — the cheapest way per pair.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eIn the hand\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe spring does the boring half of the work\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA spring between the handles pops the jaws open after every cut, so trimming thirty legs on a board is thirty squeezes rather than sixty movements. It is the difference between a tool you can use for an hour and one that makes your hand ache in ten minutes.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe handles are TPR over the steel — soft enough to grip without gloves, thin enough that the pair still disappears into a shirt pocket. There is a lanyard hole in each handle tip if your bench has a tether rule.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-jaws.jpg\" alt=\"Close views of the jaws, the pivot and the moulded model marking\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThis is a cutter, not a stripper or a crimper.\u003c\/strong\u003e Listings for this pattern of plier often pile those words into the title. It has no stripping notches and no crimping die — it cuts, and that is all it does.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eSoft metal only.\u003c\/strong\u003e One millimetre of copper is the rating. Steel wire, nails and spring steel will notch the edge, and a notched flush cutter leaves a ragged stub on every cut afterwards.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eIt is a consumable at this price.\u003c\/strong\u003e SK5 at HRC 50 ±3 holds an edge well for soft work, but it is not a $40 precision cutter with induction-hardened tips. Treat a pair as something you replace, not something you send out for sharpening — which is exactly why the multipacks are here.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and materials\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eOverall length\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e132 mm on the maker's drawing; their written spec sheet says 125 mm. Either way it is a five-inch class cutter.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eHead\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e32 mm long, 18 mm jaw, 6 mm cutting edge\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eHandles\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e80 mm, TPR over steel, lanyard hole in each tip\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eJaw material\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSK5 carbon steel, hardened, knife-edge ground\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eEdge hardness\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eHRC 50 ±3, as stated by the maker\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eCutting capacity\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1 mm (0.040 in) diameter copper wire — the figure moulded on the handle\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eAction\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSpring return, opens on release\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eColour\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eBlue handles, black jaws\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1, 5, 10 or 20 pairs of cutters — whichever pack you choose. No case, no other tools.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-spec.jpg\" alt=\"Dimension drawing: 132 mm overall, 80 mm handles, 32 mm head, 18 mm jaw, 6 mm cutting edge\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it cut steel wire, guitar strings or nails?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo, and trying it once is usually enough to ruin the edge. The rating is 1 mm of copper. For hard wire you want a dedicated hard-wire cutter with induction-hardened jaws, which is a different and heavier tool.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it cut truly flush?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOne face of the jaws is ground nearly flat, so with that face against the board the cut sits very close to the surface — close enough that most people stop reaching for a file. It is a near-flush grind at this price, not a certified flush cutter.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on 3D prints?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes — this pattern is a standard on print benches for supports, brim and stringing in PLA and PETG. Take support material off in small bites rather than levering with the jaws; the tool is ground to cut, not to pry.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it ESD safe?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The handles are ordinary TPR, not a dissipative compound, and nothing here is rated for ESD work. If you are handling static-sensitive parts, this is not the pair to use.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eAre the handles insulated for live work?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The TPR is there for grip and comfort — it carries no VDE or 1000 V rating. Do not use these on live circuits.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich pack should I buy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOne pair if it is for a drawer. Five if you trim most days or want one per toolbox. Ten or twenty if you are stocking a workshop, a classroom or a line, where the point is that a fresh pair is always within reach.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan the jaws be sharpened?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIn principle, on a fine stone, holding the original bevel. In practice almost nobody does it at this price — the grind is thin and easy to ruin, and a new pair costs less than the time. Keep the edge instead: soft metal only, no prying.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow do I look after them?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWipe the jaws dry after damp work and put a trace of light oil on the pivot every few months. Carbon steel rusts if you leave it wet; that is the only maintenance these ask for.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1pcs","offer_id":44054017146970,"sku":"NX-FLUSHCUT-1","price":9.95,"currency_code":"USD","in_stock":true},{"title":"5pcs","offer_id":44054017048666,"sku":"NX-FLUSHCUT-5","price":27.95,"currency_code":"USD","in_stock":true},{"title":"10pcs","offer_id":44054017114202,"sku":"NX-FLUSHCUT-10","price":49.95,"currency_code":"USD","in_stock":true},{"title":"20pcs","offer_id":44054017081434,"sku":"NX-FLUSHCUT-20","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-nipper-trio.jpg?v=1789203835"},{"product_id":"folding-wire-stripper-pliers","title":"Folding Wire Stripper Pliers — 18 Functions, Spring Loaded, 22 cm","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eFolds shut, rides in a pocket\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eOne pair of pliers for the small wiring jobs.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eStripping a wire, snipping a cable tie, crimping a spade terminal, bending a hook to go under a terminal screw — four jobs that usually mean four tools on the floor around you. This is those jobs in one 22 cm (8.66 in) pair of pliers, and when you are done the handles fold up around the jaws to about palm size.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S433f23a0875547a498e4fb5a93f6950eb.webp\" alt=\"The folding wire stripper closed and held in one hand, showing how small it packs down\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e22 cm open\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e8.66 in — full-size leverage, not a keyring tool\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eAbout 10 cm folded\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eAround 4 in — tool pouch, glovebox or jacket pocket\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eQuenched, forged steel\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eHardened jaws, stainless body\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSpring inside the joint\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eOpens itself between cuts, so one hand does the work\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sf3cdaa83d24b4e538d4804fe878b64c8l.webp\" alt=\"Function map of the pliers: strip wire, cut, clamp, tighten screw caps, cut screws, wind, split and press wire\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it actually does\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFour jobs it does properly\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eStrip.\u003c\/strong\u003e A row of sized holes takes the insulation off without biting the copper — as long as the hole matches the wire. \u003cstrong\u003eCut.\u003c\/strong\u003e A shear edge for wire and cable ties, plus threaded holes for trimming small bolts from M2.5 to M4. \u003cstrong\u003eCrimp.\u003c\/strong\u003e A terminal jaw for insulated spade and ring terminals. \u003cstrong\u003eWind.\u003c\/strong\u003e The rounded nose bends a clean hook in solid wire so it sits under a terminal screw instead of splaying out.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eAround those sit the smaller tricks — splitting a two-core cable, pressing a wire flat, gripping a screw cap, 6 mm and 10 mm nut notches, a hook for pulling cable. That is where the eighteen in the name comes from.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part nobody tells you\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eEighteen functions is a way of counting, not a promise\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 360px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eEvery multi-tool in this category counts generously. Stripping several wire sizes is counted as several functions; cutting and shearing are two. Take out the overlap and you have a tool that strips, cuts, crimps, bends and grips — five real jobs, in one pair that folds into a pocket.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eWhat it is not is a substitute for the dedicated tools at the extremes. A ratcheting crimper sets a heavy lug on thick cable properly; this does not. Lineman's pliers cut steel wire all day; this will mark its jaws if you try. Buy it because one tool in a pocket beats four in a bag, not because it replaces a bench full of kit.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eAnd the folding joint is the honest trade. It is what makes the tool pocketable, and no folding pivot is as rigid as a solid one. Squeeze in line with the handles and let the jaws do the work; do not lever sideways on a stuck fitting.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S0bc4d2619ff8452d80e3c4b083cc1c03G.webp\" alt=\"Detail shots: quenched and forged steel, sharp shearing edge, inner spring and the folding design\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThese handles are not insulated for live work.\u003c\/strong\u003e They are non-slip grips, not VDE-rated 1000 V insulation, and nothing in the specification says otherwise. Turn the circuit off and test it dead before you touch it, the same as you would with any uninsulated tool.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eMatch the hole to the wire.\u003c\/strong\u003e The stripping holes are sized. Use one that is too small and you nick the conductor, which is the most common way a wire fails months later at a terminal. Start a size large and work down.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eFold it before it goes in the pocket.\u003c\/strong\u003e Folded, the jaws sit between the handles. Dropping it open into a tool bag is how a shear edge gets chipped, and a chipped edge crushes rather than cuts.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and materials\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e22 cm (8.66 in)\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eWidth\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e6.5 cm (2.56 in) across the handles\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eFolded\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAbout 10 cm (4 in) long — not published; scaled from the maker's own drawing\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eStripping holes\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eStamped on the jaws. The maker's photos show 16, 14, 12, 10 and 8 (AWG) on one face and 0.8 to 2.6 mm on the other\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eBolt cutting\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThreaded holes marked M2.5, M3, M3.5 and M4\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eNut notches\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e6 mm and 10 mm\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eQuenched and forged steel jaws, stainless body, non-slip handles\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eAction\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eInner return spring; lock at the pivot; handles fold around the jaws\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAn insulation rating, a weight, and a folded size — so the one above is our measurement from the drawing, not the maker's figure\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne pair of pliers. No pouch or case is listed\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-wirestripper-spec.jpg\" alt=\"The pliers open, 22 cm long, and folded, about 10 cm\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on live circuits?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The grips are non-slip plastic, not certified insulation, and no voltage rating is published for them. Treat it as an uninsulated hand tool: switch off, test dead, then work.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat wire sizes does it strip?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe sizes are stamped next to the holes. In the maker's photos one face reads 16, 14, 12, 10 and 8 — AWG gauges — and the other reads 0.8 to 2.6 mm. There is no separate size table, so try the hole on a scrap end before you strip the run you care about.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it nick the copper?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNot if the hole matches the wire. Nicked strands come from forcing a thick wire into a hole that is too small. If in doubt, step up a size — the insulation still pulls off cleanly.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it crimp properly?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor insulated spade and ring terminals on light-gauge wire, the crimp jaw closes the barrel. Give every crimp a firm tug before you trust it. For heavy lugs on thick cable, use a ratcheting crimper — a plier crimp on a big lug can look right and still heat up later.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the folding joint solid?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eSqueezed in line with the handles, which is how pliers are meant to be used, yes. No folding pivot is as rigid as a fixed one under sideways force, though. If your work is mostly levering and twisting, a fixed pair of lineman's pliers is the better buy.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is the winding function for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBending a hook in solid wire so it seats under a terminal screw. A hooked end tightens down evenly; a straight end squeezes out sideways and ends up half-clamped, which is how loose terminals happen.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eLeft or right handed?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eEither hand. The handles are straight, with no shaped thumb rest favouring one side.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it come with a pouch?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNone is listed — plan on the tool only. It folds small enough to sit in a pouch pocket or a jacket, which is rather the point.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Default Title","offer_id":44098258927706,"sku":"NX-WIRESTRIP-18","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-wirestripper-set.jpg?v=1789551875"},{"product_id":"right-angle-drill-attachment","title":"105° Right-Angle Drill Attachment — Magnetic 1\/4 in Hex Bit Holder, Short or Extended","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhere the drill will not fit\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe screw is right there. The drill is too long to reach it.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eInside a cabinet, between two joists, behind a drawer runner — the screw is in reach of your hand but not of a drill pointing straight at it. This goes in the chuck and turns the drive around the corner: the drill stays pointing along the panel, and the bit comes out of the side of a small head at \u003cstrong\u003e105°\u003c\/strong\u003e, straight into the screw.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sdca0ac0eb3324cc38b0e8f553bda6356l.webp\" alt=\"Driving a screw inside a cabinet with a cordless drill and the right-angle attachment\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e105° head\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eTurns the drive around the corner\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e1\/4 in hex\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eStandard bits in, standard chuck out\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eMagnetic socket\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe bit stays put when you aim upside down\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e60 mm or 140 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eShort for tight gaps, long for deep ones\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sd8e5569ef8ed42c5969bfd0dd8253a59s.webp\" alt=\"The extended right-angle attachment driving a screw flat against a wooden board\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it actually does\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eGears in the head, a socket on the side\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe hex shank goes into your drill like any bit. Inside the head, a pair of gears carries the rotation round the bend, and the output is a 1\/4 in hex socket facing sideways. The whole head is about 30 × 20 mm, so it slips into gaps a drill body never will.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eWhy 105° and not a square 90°? With the bit square to the screw, the shaft leans about 15° away from the surface — which is the room your knuckles and the drill body need so they are not dragging along the panel.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sdaecced99d9f4b34b3769da3f1de5f17y.webp\" alt=\"A PH2 bit held in the magnetic hex socket of the right-angle head\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMagnetic socket\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eAny 1\/4 in hex bit, held by a magnet\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe socket takes the same 1\/4 in (6.35 mm) hex bits as your drill — Phillips, Pozi, Torx, square, nut drivers. It is about 12 mm deep with a magnet at the bottom, so a bit does not fall out when you are working overhead or reaching up under a worktop.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eUse a magnetic bit and the screw hangs on the tip too. That matters more here than on a straight drill, because in the places this goes you usually cannot get a second hand in to hold the screw.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part nobody tells you\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eHold the head, or it will try to spin\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 360px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eEvery right-angle head does this and hardly any listing mentions it. When the bit meets resistance, the body of the head wants to turn the opposite way around the drill shaft. Let go of it and it swings round, the bit cams out, and the screw head gets chewed.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eSo hold the body still with your free hand while the drill does the turning. On the short version that means pinching the collar. The extended version comes with a \u003cstrong\u003eremovable grip\u003c\/strong\u003e clipped along the shaft — something to hold that is out of the way of the head, and it lifts off when the gap is too tight for it.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eStart slow, with the clutch set low. The maker describes it as \u003cstrong\u003enot for high-torque work\u003c\/strong\u003e and recommends it for woodworking — cabinet screws, hinges, drawer runners, brackets — not for lag bolts or deck screws driven flat out.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-extended.jpg\" alt=\"Extended right-angle drill attachment with its removable grip along the shaft\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThree options\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eShort, extended, or both\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eSame head, same socket, same magnet. The difference is how far the head sits from the chuck — and that decides which gaps you can reach.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:30px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-short.jpg\" alt=\"Short right-angle drill attachment, 60 mm\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eShort · 60 mm\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eThe compact one. Keeps the drill close, so it has the most control — right for a gap that is narrow but shallow: between two cabinet sides, a hinge in a corner unit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-extended.jpg\" alt=\"Extended right-angle drill attachment, 140 mm\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eExtended · 140 mm\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eA long thin shaft puts the head deep inside while the drill stays outside — the back of a base unit, between joists, down beside an appliance. Comes with the removable grip.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-set.jpg\" alt=\"Short and extended right-angle drill attachments together\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eSet · short + extended\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eBoth in one order. If you fit kitchens or build flat-pack regularly, you will want the reach of one and the control of the other — often on the same job.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003ePlan on using your own bits.\u003c\/strong\u003e The maker's box shots show the attachments only, with no bits alongside. The bits in the photos are there to show the socket in use. Any standard 1\/4 in hex bit fits.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eKeep it off the impact driver.\u003c\/strong\u003e The maker rates it for light, woodworking torque. An impact driver hammers the gears in the head far harder than a drill on a low clutch, and that is the quickest way to strip them.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eSome of the maker's figures do not agree.\u003c\/strong\u003e The head measures 20 mm across in one of their drawings and 22 mm in another, and the weights (90 g short, 150 g extended) are theirs, not ours. We print the numbers as supplied and say so, rather than pick the flattering one.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and fit\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eAngle\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e105° between the input shaft and the bit\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eInput\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/4 in (6.35 mm) hex shank — fits drill chucks and quick-release hex holders\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eOutput\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/4 in hex socket, magnetic, about 12 mm (0.47 in) deep\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eHead\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAbout 30 × 20 mm (1.2 × 0.8 in); one maker drawing gives 22 mm\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eShort 60 mm (2.4 in) · Extended 140 mm (5.5 in)\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eWeight\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eShort 90 g (3.2 oz) · Extended 150 g (5.3 oz), maker's figures\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteel, bright polished finish\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eGrip\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRemovable grip on the extended version only\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eUse with\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eDrill\/drivers and cordless drills on a low clutch setting; by hand for light screws. Not for impact drivers.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne short, one extended, or one of each — depending on the option. Bits not shown as included.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-spec.jpg\" alt=\"Short attachment 60 mm 90 g and extended attachment 140 mm 150 g side by side\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIf your drill has a normal three-jaw chuck or a 1\/4 in hex quick-release, yes. The shank is a standard 1\/4 in hex, the same as a driver bit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on an impact driver?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWe would not. The maker says it is not for high-torque work, and the hammering action of an impact driver is exactly what wears out the small gears in the head. A drill\/driver on a low clutch setting is the right partner for it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it come with bits?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePlan on no. The maker's photos of what ships show the attachments on their own. Your existing 1\/4 in hex driver bits will fit the socket.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy does the head keep trying to turn?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThat is torque reaction, and every right-angle head has it. Hold the body of the head — or the grip on the extended version — with your free hand while the drill turns the bit. Start slowly and it is easy to control.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I drill holes with it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker only talks about driving screws, so treat drilling as a light extra: a small pilot hole in softwood with a 1\/4 in hex-shank bit, at low speed. Large bits, hardwood and metal ask far more of the gears than it is built for.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it without a drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor light wood screws, yes — turn the shank by hand, or with a hex screwdriver handle. It is slower, but useful for the last half-turn when you do not want to over-tighten a hinge.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich option should I buy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eShort if your gap is narrow but shallow and you want the most control. Extended if you need to reach deep into a cabinet or between joists. The set if you fit kitchens, wardrobes or flat-pack regularly — you will use both.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Short · 60 mm","offer_id":44098259255386,"sku":"NX-ANGLEDRIVE-SHORT","price":10.99,"currency_code":"USD","in_stock":true},{"title":"Extended · 140 mm","offer_id":44098259189850,"sku":"NX-ANGLEDRIVE-EXT","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Set · short + extended","offer_id":44098259222618,"sku":"NX-ANGLEDRIVE-SET","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-set.jpg?v=1789551333"},{"product_id":"dowel-maker-jig","title":"Dowel Maker Jig — 8 Sizes from 8 to 20 mm, Carbide Insert, Runs on a Drill","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOffcuts in, dowels out\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eMake your own round dowels from scrap hardwood, with the drill you already own.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eSpin a blank in your drill and push it through one of the eight holes. A carbide insert inside the wheel shaves it round as it goes, and what comes out the far side is a dowel in the wood you chose — walnut pegs for walnut furniture, oak pins for an oak frame, not the pale birch you get in a bag.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a metric tool.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eIt makes dowels of \u003cstrong style=\"color:#fff\"\u003e8, 9, 10, 12, 14, 16, 18 and 20 mm\u003c\/strong\u003e. It does \u003cstrong style=\"color:#fff\"\u003enot\u003c\/strong\u003e make 3\/8, 1\/2 or 3\/4 in dowels. Only two of the sizes land close to everyday American ones — 8 mm is about 5\/16 in and 16 mm is about 5\/8 in — and even those come out a few thousandths over. If you are gluing them into holes, drill the holes with a metric bit of the same size. The full size chart is further down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-doweljig-hero.jpg\" alt=\"Dowel maker jig: a red aluminum wheel with eight holes, a rotating carbide cutter and a Torx key\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eEight sizes\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e8 to 20 mm (0.31 to 0.79 in) around one wheel\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eOne carbide insert\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFour cutting edges, standard replacement part\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eRuns on a drill\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eNo lathe; the drill spins the wood\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eScrews to the bench\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e77 mm (3 in) tall on a 60 × 48 mm base\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S2643a2c24be2478cbced001bc5cb7e64p.webp\" alt=\"The cutter holder turns a full circle to line the carbide insert up with any of the eight holes\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eHow it cuts\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eTurn the cutter to a hole, lock it, feed the wood\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe black holder in the middle turns a full circle. Loosen it with the Torx key, swing the carbide insert round to the hole you want, and tighten it again. The insert now sits at the edge of that hole, and anything spinning through the hole gets shaved down to its diameter.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe insert is a standard part: a \u003cstrong\u003e15 × 15 × 2.5 mm, 30°, R150\u003c\/strong\u003e carbide square, the same type used in aftermarket spiral planer heads. It has four edges. When one dulls, loosen its screw, turn it a quarter turn to a fresh edge and carry on. When you order spares, make sure they say \u003cstrong\u003eR150\u003c\/strong\u003e — the same-size R100 insert is a different part.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-doweljig-parts.jpg\" alt=\"What the larger sets add: a drive nail, a spare carbide insert, or ten spare inserts\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part that decides which set to buy\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eYour drill has to be able to turn the wood\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA drill chuck grips round bits, not square sticks. A 1\/2 in chuck will hold square stock only up to about 3\/8 in across, and a 3\/8 in chuck even less. That covers the smallest holes and nothing else. For 14, 16, 18 and 20 mm dowels — and in practice for most of the sizes — the blank simply will not fit in the chuck.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThat is what the \u003cstrong\u003edrive nail\u003c\/strong\u003e is for. Drill a small pilot hole in the center of the blank’s end, screw the nail in, and chuck its hex shank instead. The supplier’s drawing shows it 42 mm (1.65 in) long with a 9 mm hex shank.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eIf you want the big sizes, buy a set with the nail in it\u003c\/strong\u003e — or add the nail on its own. The jig-only set assumes you already have another way to drive the blank.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eGetting a clean dowel\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSeven habits that separate a dowel from a broken stick\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e1\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eFix the jig down.\u003c\/strong\u003e Screw or clamp the base near the end of your bench so both hands are free for the drill.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e2\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eUse a straight, knot-free blank\u003c\/strong\u003e a little larger than the dowel you want. A bowed stick gives a bowed dowel, and knots are where sticks snap.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e3\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eKnock the corners off first.\u003c\/strong\u003e An octagon feeds far more easily than a square, which takes a lot more force.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e4\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eChamfer or point the leading end\u003c\/strong\u003e so it starts into the hole instead of catching on the edge.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e5\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eDrill fast, feed slow, and do not stop halfway.\u003c\/strong\u003e Pausing mid-stick leaves rings in the dowel. A corded drill is the easier choice; this job drains batteries.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e6\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eSupport the dowel as it comes out\u003c\/strong\u003e — a V-block or a helper. A long unsupported stick whips around and cracks.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:18px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 28px;color:#E5622A;font-weight:700\"\u003e7\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eClear the chips after every stick\u003c\/strong\u003e, with an awl or a scrap of wood. Packed shavings stop it cutting. Never use your fingers.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S983495f3eab5456e8473e4ab7336098ew.webp\" alt=\"A square blank spun by a drill being fed through the dowel maker\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMetric, in inches\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eWhat each hole makes, next to the nearest inch size\u003c\/h2\u003e\n\u003cp style=\"max-width:820px;margin:0 0 20px;color:#4A5058\"\u003eA plus sign means the dowel is nominally bigger than that bit, so it will be tight; a minus means it will be loose. These are the nominal sizes of the holes — we have not measured finished dowels, and real size shifts with the wood, its moisture and how fast you feed.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 440px;overflow-x:auto\"\u003e\n    \u003ctable style=\"width:100%;border-collapse:collapse;font-size:15px\"\u003e\n      \u003cthead\u003e\u003ctr style=\"text-align:left;color:#5A6472;border-bottom:2px solid #E3E6EA\"\u003e\n\u003cth style=\"padding:10px 8px 10px 0;font-weight:600\"\u003eHole\u003c\/th\u003e\n\u003cth style=\"padding:10px 8px;font-weight:600\"\u003eInches\u003c\/th\u003e\n\u003cth style=\"padding:10px 8px;font-weight:600\"\u003eClosest inch bit\u003c\/th\u003e\n\u003cth style=\"padding:10px 0 10px 8px;font-weight:600\"\u003eEveryday size\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e8 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.315\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e5\/16 in, +0.002\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eYes — 5\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e9 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.354\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e23\/64 in, −0.005\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e10 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.394\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e25\/64 in, +0.003\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo — 0.019 over 3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e12 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.472\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e15\/32 in, +0.004\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo — 0.028 under 1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e14 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.551\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e35\/64 in, +0.004\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo — 0.011 under 9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e16 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.630\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e5\/8 in, +0.005\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eYes — 5\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e18 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.709\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e45\/64 in, +0.006\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003e20 mm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.787\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e25\/32 in, +0.006\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eNo — 0.037 over 3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp style=\"margin:14px 0 0;color:#4A5058;font-size:15px\"\u003eThe simple fix for a glued joint: drill with a metric bit of the same size. Metric brad-point and Forstner bits in these sizes are sold by American woodworking suppliers. Test-fit before you glue.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S536d07e0c5c4467b86ea84418106dc21S.webp\" alt=\"Dowels in each of the eight sizes from 8 to 20 mm next to the jig\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFive things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe first few sticks will probably go wrong.\u003c\/strong\u003e A published hands-on test of this kind of jig warns that the first several sticks tend to break or come out rough. It is a feed-and-speed skill, and it comes quickly, but budget a few offcuts for it.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003ePlan to sand.\u003c\/strong\u003e A single insert shaving a spinning stick leaves a clean dowel, not a polished one. Nobody publishes a finish figure for this kind of tool, and neither will we.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eStraight-grained hardwood is what works.\u003c\/strong\u003e The test above used red oak, walnut and cherry without trouble. Knots, wild grain and open-grained woods are where sticks tear out or snap. We have no test data on softwoods.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThere is no honest maximum length.\u003c\/strong\u003e The longer the blank, the more it wants to twist between the drill and the cutter. Support it, and do not expect broom handles.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eWe have not measured the dowels.\u003c\/strong\u003e The hole sizes are nominal. Real diameter depends on the wood, its moisture and your feed rate, so test-fit in a scrap before you glue anything that matters.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S5c43a68d2a224693a8da2074fda09a57y.webp\" alt=\"The cutter holder removed from the wheel, with its carbide insert and screws\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSafety\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eA spinning stick deserves respect\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 10px\"\u003eWear eye protection — chips come out fast. Keep gloves, sleeves and long hair away from the spinning blank. Hold the drill firmly with both hands; a high-torque drill can twist hard if the stick binds.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eIf the drill stalls, let go of the trigger at once rather than fighting it. And never reach into the cutter opening with a finger to clear shavings, even with the drill stopped.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eChoose your set\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eEvery set has the jig, a mounted insert and the Torx key\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eJig only\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eFor small dowels you can chuck directly, or if you already drive blanks another way.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eJig + 1 spare insert\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eThe same, with four fresh edges in reserve.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0;background:#FFF7F2\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eJig + spare insert + drive nail \u003cspan style=\"color:#E5622A;font-weight:700\"\u003e· our pick\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eThe set that makes all eight sizes without extra parts.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eJig + 10 spare inserts\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eFor batch work, if you already have a drive for the bigger blanks.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eJig + 10 spare inserts + drive nail\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eEverything, with forty spare cutting edges.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003e10 spare inserts only\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eRefills for a jig you already own. Standard 15 × 15 × 2.5 mm, 30°, R150.\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 290px;font-weight:600\"\u003eDrive nail only\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 300px\"\u003eAdd it if you bought the jig without one and want the larger sizes.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and figures\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eHoles\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e8, 9, 10, 12, 14, 16, 18 and 20 mm (metric only)\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eBody\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAnodized aluminum wheel, 77 mm (3.03 in) tall\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eBase\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e60 × 48 mm (2.36 × 1.89 in), with holes for screwing it down\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eCutter\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne carbide insert, 15 × 15 × 2.5 mm, 30°, R150 — four usable edges\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eKey\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eTorx L-key, marked T30 on the supplier’s drawing\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eDrive nail\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eIn the sets that name it. 42 mm (1.65 in) long, 9 mm hex shank, per the supplier’s drawing\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eDrill\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAny drill that can run fast; corded is easier on long runs\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eShipping weight\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e0.49 kg (1.1 lb)\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 160px;color:#5A6472\"\u003eNot verified by us\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFinished dowel tolerance, maximum length, finish on specific woods, and whether mounting screws are in the box\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-doweljig-spec.jpg\" alt=\"Dowel maker jig size: 77 mm tall on a 60 by 48 mm base, holes from 8 to 20 mm\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan it make 3\/8, 1\/2 or 3\/4 inch dowels?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The holes are metric. The 10 mm hole makes a dowel about 0.019 in over 3\/8, the 12 mm one about 0.028 in under 1\/2, and the 20 mm one about 0.037 in over 3\/4. Only 8 mm (about 5\/16) and 16 mm (about 5\/8) are close to everyday inch sizes. Drill your holes with a matching metric bit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo I need the drive nail?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor the larger sizes, almost certainly. A 1\/2 in chuck grips square stock only up to about 3\/8 in across, so blanks for 14 to 20 mm dowels will not fit. The nail screws into the end of the blank and gives your chuck a hex shank to hold. If you already drive blanks with a socket or a lag screw, you can skip it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat drill should I use?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOne that runs fast and does not bog down. The cleanest results come from high speed and a slow, steady feed. A corded drill is easier for a batch of dowels; this is exactly the kind of long, steady load that drains a battery.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat wood works best?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eStraight-grained hardwood with no knots. A published test of this kind of jig used red oak, walnut and cherry successfully. Knots and wild grain are where sticks break. We have no test data for softwoods, so we will not promise anything there.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow big should the blank be?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eA little larger than the dowel you want, and straight. Taking the corners off to an octagon first makes the feed much easier than a full square. Chamfer or point the end that goes in first.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhere do I get replacement inserts?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe insert is a standard 15 × 15 × 2.5 mm, 30°, R150 carbide square, sold in packs of ten for spiral planer and jointer heads. We sell a ten-pack as an option on this page too. Check for R150 — the same-size R100 insert is a different part.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the body steel?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo, it is anodized aluminum. The cutting is done by the carbide insert; the aluminum wheel just holds it and guides the stick.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow smooth are the dowels?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eClean, not polished. Expect a light sanding, especially on your first few sticks while you find the right feed speed.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Jig only","offer_id":44157684973658,"sku":"NX-DOWELJIG-1","price":56.95,"currency_code":"USD","in_stock":true},{"title":"Jig + 1 spare insert","offer_id":44157684940890,"sku":"NX-DOWELJIG-1B","price":61.95,"currency_code":"USD","in_stock":true},{"title":"Jig + spare insert + drive nail","offer_id":44157684908122,"sku":"NX-DOWELJIG-1BN","price":63.95,"currency_code":"USD","in_stock":true},{"title":"Jig + 10 spare inserts","offer_id":44157684875354,"sku":"NX-DOWELJIG-10B","price":88.95,"currency_code":"USD","in_stock":true},{"title":"Jig + 10 spare inserts + drive nail","offer_id":44157684842586,"sku":"NX-DOWELJIG-10BN","price":90.95,"currency_code":"USD","in_stock":true},{"title":"10 spare inserts only","offer_id":44157684809818,"sku":"NX-DOWELJIG-INSERT10","price":42.95,"currency_code":"USD","in_stock":true},{"title":"Drive nail only","offer_id":44157684777050,"sku":"NX-DOWELJIG-NAIL","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-doweljig-hero.jpg?v=1790061395"},{"product_id":"drill-sheet-metal-shear","title":"Sheet Metal Shear Drill Attachment — Twin-Wheel Cutter for Thin Sheet, with Stay Rod","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eYour drill does the squeezing\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eCut thin sheet metal with a cordless drill instead of your forearms.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eHand snips are fine for a few inches. For a long run of flashing, a sheet of thin aluminum or a piece of flat duct, this head clamps in your drill chuck and does the work: two hardened wheels pinch the sheet and shear it as the drill turns. It is a shear, not a grinder — no sparks, no dust, and no strip of metal cut away.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is made for thin, flat sheet.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe supplier’s maximums — about 1 mm of steel, 1.5 mm of aluminum or copper — are a ceiling, not an everyday figure. The people who are happiest with this kind of tool use it on thin flashing, light-gauge steel and thin aluminum. It does \u003cstrong style=\"color:#fff\"\u003enot\u003c\/strong\u003e cut stainless, hardened steel, welded seams, or across the ribs of corrugated roofing, and it is not for plastic, leather or cardboard.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-drillshear-hero.jpg\" alt=\"Sheet metal shear drill attachment: a cast gear head with two hardened cutting wheels and a hex shank\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eA shear, not a saw\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eNo sparks, no dust, nothing cut away\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eRuns on a drill\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eAn 18\/20 V cordless drill is the right size\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eStay rod included\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eStops the head spinning round the drill\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eThin, flat metal\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFlashing, light-gauge steel, thin aluminum\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sd4069b5fd39d4c8aa1ba64f9da3274c32.webp\" alt=\"The attachment on a cordless drill, shearing a sheet of thin metal\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eHow it cuts\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eTwo wheels, one line\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe hex shank goes in your drill chuck. Inside the cast head, gears turn a knurled drive wheel that grips the sheet and pulls it through, while a second hardened wheel shears it against the first — the same way a pair of snips works, only continuous.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBecause it shears rather than grinds, nothing is cut away: the sheet simply parts. Start from an edge of the sheet, since the lower wheel runs underneath it, and leave some clearance below the cut line.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S4a44d23436b24266b037a22fb156df9cp.webp\" alt=\"Six installation steps: fit the head in the chuck, fit the stay rod, rest it against the drill handle and wrap the spring round the handle\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part people skip\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFit the stay rod every time\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe head wants to spin round the drill instead of cutting. The steel stay rod stops it: one end screws into the head, the other rests against your drill’s handle, and the spring wraps round the handle to hold it there. Without it the head turns the moment the wheels bite.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eTwo honest caveats from people who use these: the rod gives a little when you steer hard, and the spring can chew a soft rubber grip. Pad the grip with a strip of tape if you care about it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it will cut\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eThe supplier’s maximums, in US gauge\u003c\/h2\u003e\n\u003cp style=\"max-width:820px;margin:0 0 20px;color:#4A5058\"\u003eThese are the supplier’s own figures, converted with a standard sheet-metal gauge chart (standard steel and aluminum columns). Treat them as the ceiling. Other sellers of this same design rate it lower, and buyers report good results anywhere from about 29 to 22 gauge steel — and failures in that range too. Results vary from one unit to the next.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 440px;overflow-x:auto\"\u003e\n    \u003ctable style=\"width:100%;border-collapse:collapse;font-size:15px\"\u003e\n      \u003cthead\u003e\u003ctr style=\"text-align:left;color:#5A6472;border-bottom:2px solid #E3E6EA\"\u003e\n\u003cth style=\"padding:10px 8px 10px 0;font-weight:600\"\u003eMaterial\u003c\/th\u003e\n\u003cth style=\"padding:10px 8px;font-weight:600\"\u003eSupplier maximum\u003c\/th\u003e\n\u003cth style=\"padding:10px 0 10px 8px;font-weight:600\"\u003eIn gauge\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003eSteel sheet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e1.0 mm (0.039 in)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eBetween 20 and 19 ga\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003eAluminum\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e1.5 mm (0.059 in)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eAbout 15 ga\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003eCopper\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e1.5 mm (0.059 in)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 8px 10px 0\"\u003e\u003cstrong\u003eThinnest\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 8px\"\u003e0.3 mm (0.012 in)\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0 10px 8px\"\u003eAbout 30 ga\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp style=\"margin:18px 0 6px;font-weight:600\"\u003eGood jobs for it\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px;color:#4A5058\"\u003eRoof and step flashing, thin aluminum sheet, light-gauge steel for garden beds and projects, the flat pans of roofing panels, flat duct.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eNot for\u003c\/p\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eStainless or hardened steel, anything thicker than the table, welded seams, bends, across the ribs of corrugated or ribbed panels, strips narrower than about an inch (they bend and chew), and non-metals of any kind.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sec2c4f4c72b5441fb7a8f62db694218dh.webp\" alt=\"The shear head fitted to a cordless drill with the stay rod in place\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFive things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eStraight lines take practice.\u003c\/strong\u003e Freehand, it wanders — the most common complaint about this kind of tool. Clamp the sheet, run the head along a straightedge, and go slower than feels necessary. Gentle curves are fine; tight ones are not.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not built for daily trade work.\u003c\/strong\u003e This is a low-cost tool for occasional DIY cuts. Buyers report gears and wheels wearing out, sometimes quickly, when it is pushed on heavier sheet. A branded drill shear costs two to four times as much and is the better buy if you cut metal for a living.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eBoth cut edges are razor sharp.\u003c\/strong\u003e Shearing leaves clean, sharp edges on both pieces, and the drive wheel can mark the offcut side. Handle the sheet with cut-resistant gloves.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eCorrugated roofing: flat pans only.\u003c\/strong\u003e The maker says ribbed sheet cannot be cut. A few users say they have forced it over small ribs with poor accuracy; many say it will not go. We do not claim it.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eWe do not sell replacement wheels.\u003c\/strong\u003e When the wheels or gears wear, the head is done. Buy it knowing that.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eUsing it well\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eDrill, speed and what to do when it jams\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eDrill\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAn 18 V or 20 V cordless drill. The maker says 12–21 V drills work, with 12 V noticeably weaker. Use drill mode, not a hammer setting.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eImpact driver\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eNot tested and not recommended. Use a drill with a normal three-jaw chuck.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eSpeed\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteady and moderate. Do not force the feed; let the wheels pull the sheet in. Slower is easier to keep on a line.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eDirection\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCut in forward only. If it jams, let go of the trigger. Back it out with a short burst of reverse at low speed, hands well clear — or take the battery out and free the sheet by hand.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eStarting\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFrom an edge of the sheet, with room under the cut for the lower wheel. You may need to fiddle with the angle before the wheels grab.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 150px;color:#5A6472\"\u003eBattery\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eLong cuts drain it. Keep a spare charged if you have a lot to do.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S6ee1549a3d0f4464bf1027e2affb757fg.webp\" alt=\"Close-up of the two cutting wheels meeting at the edge of a sheet\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSafety\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eWear safety glasses with side shields and cut-resistant gloves.\u003c\/strong\u003e The danger is not sparks; it is the sharp edges and the pinch points.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003eKeep your fingers away from the wheels, and away from where the spring and rod meet the drill — people do pinch themselves there. The lower wheel runs under the sheet close to where your free hand holds it, so clamp the work when you can.\u003c\/p\u003e\n      \u003cp style=\"margin:0\"\u003eTake the battery out before you adjust the head, fit the rod or clear a jam.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb572d7692d5d4fd384e37bd4338ac1bbi.webp\" alt=\"The drill and shear head cutting along the edge of a thin metal sheet\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eChoose your kit\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThe same head, with or without a side handle\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:30px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 320px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-drillshear-kit.jpg\" alt=\"Cutter head kit: the head, stay rod, spring, open-end wrench and hex key\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eCutter head kit\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eThe head, the steel stay rod, the spring, an open-end wrench and a hex key. Everything you need on a typical cordless drill, where the rod rests against the drill’s own handle.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 320px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-drillshear-handle.jpg\" alt=\"The side handle in the handle kit, which clamps round the drill's collar\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eCutter head kit + side handle\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eThe same kit plus a side handle that clamps round the drill’s collar, with its own fixing rod and wing nut. The supplier shows it on a corded drill. It will not fit every drill — at least one buyer reports it not fitting their cordless model — so only pick it if your drill has a round collar behind the chuck.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat gauge will it really cut?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe supplier’s ceiling is about 1 mm of steel (between 20 and 19 gauge) and 1.5 mm of aluminum or copper. Buyers report good cuts from about 29 to 22 gauge steel, and some units struggle even there. Buy it for thin sheet and flashing, not for its maximum.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan it cut corrugated or metal roofing?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eAlong the flat pans, yes. Across the ribs, not reliably: the maker says ribbed sheet cannot be cut, and user reports are mixed at best. We do not sell it for that.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it cut stainless steel?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The supplier does not rate it for stainless or hardened steel, and we will not claim it. Stick to mild steel, aluminum and copper within the table above.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe hex shank goes in a normal three-jaw drill chuck. Use an 18 or 20 V drill if you have one. On a typical pistol-grip cordless drill the stay rod rests against the handle, as in the supplier’s instructions. The optional side handle needs a round collar behind the chuck and will not fit every model.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use an impact driver?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWe would not. The maker’s instructions cover drills only, and we know of no test on an impact driver. Use a drill.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy does it keep wandering off the line?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt is the nature of this design. Clamp the sheet, guide the head along a straightedge, slow the drill down, and practice on scrap first. Straight cuts do get easier with practice.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat do I do when it jams?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eLet go of the trigger. Either give it a short, slow burst of reverse with your hands well clear, or take the battery out and free the sheet by hand. Jams usually mean the sheet is too thick, the strip is too narrow, or you are pushing too hard.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy do the photos show no sparks?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBecause a shear does not make any. It parts the metal by pinching it between two wheels, rather than grinding it away. If you see sparks, something is wrong — stop and check.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Cutter head kit","offer_id":44157775511642,"sku":"NX-DRILLSHEAR-KIT","price":33.95,"currency_code":"USD","in_stock":true},{"title":"Cutter head kit + side handle","offer_id":44157775544410,"sku":"NX-DRILLSHEAR-HANDLE","price":40.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-drillshear-hero.jpg?v=1790063958"},{"product_id":"plastic-pipe-thread-cutter","title":"Plastic Pipe Thread Cutter — Drill-Driven Tap and Die, 1\/2 in (20 mm) and 3\/4 in (25 mm)","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eA tap and a die on one tool\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThread a plastic pipe with the drill you already own.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 20px\"\u003eCut a male thread on the end of a plain pipe, or a female thread inside a plain socket, and a threaded valve, faucet or adapter screws straight on — no solvent weld, no waiting for it to set. This is a tap and a die on one small aluminum tool: chuck the shaft in a drill, run it onto the pipe, back it off. One tool per size — 1\/2 in for 20 mm pipe, 3\/4 in for 25 mm pipe — or both in a set.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: these are metric pipe sizes.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe tools fit pipe that measures \u003cstrong style=\"color:#fff\"\u003e20 mm (0.79 in) or 25 mm (0.98 in)\u003c\/strong\u003e across the outside — metric PP-R, PVC and similar plastic pipe. Most pipe in American homes is a different size: 1\/2 and 3\/4 in Schedule 40 PVC measure 0.84 and 1.05 in across, and CPVC and PEX measure 0.625 and 0.875 in. None of those is a match. \u003cstrong style=\"color:#fff\"\u003eMeasure your pipe before you order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-pipethread-hero.jpg\" alt=\"The 1\/2 in and 3\/4 in threading tools, each with its drive shaft fitted\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e1\/2 in and 3\/4 in\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eSized for 20 mm (0.79 in) and 25 mm (0.98 in) plastic pipe\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eInside and outside threads\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eA tap on one end, a die on the other — move the shaft to switch\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eRuns on a drill\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eRemovable 1.97 in (50 mm) shaft, 1\/4 in (6.35 mm) drive socket\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003ePlastic pipe only\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003ePPR, PVC and MPP — never steel, copper or brass\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S27111311155b46ffbb89f24ed58786ceO.webp\" alt=\"Four steps from the maker: fit the shaft for an inside thread, line up the pipe opening, fit the shaft for an outside thread, cut the outside thread\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it actually does\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eTwo threads, one tool\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eOutside thread.\u003c\/strong\u003e The slotted cup is a die. Line it up with a square-cut pipe end, run the drill, and it cuts a male thread on the outside of the pipe — the slots let the chips out as it goes. \u003cstrong\u003eInside thread.\u003c\/strong\u003e Slide the shaft in from the other end and the threaded nose becomes a tap. Run it into the bore of a pipe or a plain slip socket — an elbow, a tee, a coupling — and it cuts a female thread for a male fitting to screw into.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThat is the whole job list: male threads on pipe ends, female threads in bores and sockets, in two sizes. It does not cut pipe to length or join it — a pipe cutter and the right fittings still do that.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part nobody tells you\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eA good thread starts before the drill does\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 360px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eNearly every bad plastic thread goes wrong at the start, not in the tool. \u003cstrong\u003eCut the pipe square\u003c\/strong\u003e — with a pipe cutter, not a hacksaw — and take the burr off the edge. A slanted end starts the die crooked, and the thread wanders all the way down. \u003cstrong\u003eClamp the work.\u003c\/strong\u003e Hold the pipe or fitting in a vise or clamp; a fitting held in one hand spins with the tool.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eRun the drill slowly and keep it in line with the pipe.\u003c\/strong\u003e Plastic cuts easily, and speed melts it instead of cutting it: low gear, gentle trigger, and let the thread pull the tool on rather than pushing it. When the thread is as long as the fitting needs, stop, switch to reverse and back the tool off the way it went on. Clear the chips out of the slots before the next cut.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThen wrap the male thread with PTFE tape before the fitting goes on, and tighten it finger-tight plus one to two turns. Plastic threads strip if you keep leaning on the wrench.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S107401a77c2444b19837ed16b3976bfe5.webp\" alt=\"Both threading tools, with small photos of one on a drill and one threading a pipe end\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThree options\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eMeasure the pipe, then pick the size\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-pipethread-kit.jpg\" alt=\"Each size comes as one threading tool and one drive shaft\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe size is set by the outside diameter of your pipe, not by what the fitting is called. Measure straight across it with calipers — or wrap a strip of paper around it, mark where it overlaps, and divide that length by 3.14.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003e1\/2 in\u003c\/strong\u003e — for pipe that measures about 0.79 in (20 mm) across.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003e3\/4 in\u003c\/strong\u003e — for pipe that measures about 0.98 in (25 mm) across.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eBoth sizes\u003c\/strong\u003e — one of each, each with its own shaft, for less than the two bought separately. The one to get if your run steps down from 25 mm to 20 mm.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThese are metric sizes, and US Schedule 40 PVC is bigger.\u003c\/strong\u003e The tools are built around 20 mm (0.79 in) and 25 mm (0.98 in) pipe — the PPR and PVC sizes used across most of the world. Standard US Schedule 40 PVC measures 0.84 in across at 1\/2 in and 1.05 in at 3\/4 in, and the maker gives no fit for it. If your pipe does not measure close to 0.79 or 0.98 in, this is not the tool for it.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003ePlastic pipe only.\u003c\/strong\u003e The cutter is aluminum alloy. It threads PPR, PVC and MPP; on steel, copper or brass the teeth will blunt, not cut.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eA cut thread is the weakest point of a pipe.\u003c\/strong\u003e Threading takes material out of the wall, which is why pipe makers only thread thick-wall plastic pipe and rate a threaded joint well below the plain pipe. Use it for drains, irrigation, garden lines and projects; for a pressurized supply line inside a wall, use molded threaded fittings. Whatever you thread, pressure-test it before anything gets closed up.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and materials\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eSizes\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/2 in — for 20 mm (0.79 in) pipe · 3\/4 in — for 25 mm (0.98 in) pipe\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eThreads cut\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eMale (outside) with the die cup; female (inside) with the tap nose\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eTool height\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1.53 in (39 mm), both sizes\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eDrive shaft\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1.97 in (50 mm), removable; goes in a standard drill chuck\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eDrive socket\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/4 in (6.35 mm), through the body of the tool\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAluminum alloy\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eFor\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003ePPR, PVC, MPP and similar plastic pipe\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe thread standard (NPT or BSP), a pressure rating and a weight — so we do not quote them\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne threading tool and one drive shaft; the Both option has two of each\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-pipethread-spec.jpg\" alt=\"Two sizes for metric pipe: 1\/2 in for 20 mm pipe and 3\/4 in for 25 mm pipe; tool 1.53 in tall, shaft 1.97 in\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit US Schedule 40 PVC?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eDo not count on it. 1\/2 in Schedule 40 measures 0.84 in (21.3 mm) across and 3\/4 in measures 1.05 in (26.7 mm); these tools are built around 0.79 in (20 mm) and 0.98 in (25 mm) pipe. Measure yours before you order. Schedule 40 is also too thin-walled to thread for pressure use — pipe makers only thread the heavier Schedule 80.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the thread NPT or BSP?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker does not say. At 1\/2 in and 3\/4 in both standards use 14 threads per inch, so fittings of either kind will usually start, but the thread angle differs — 60° for NPT, 55° for BSP. Do not rely on the threads alone to seal: use PTFE tape and pressure-test the joint.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I thread metal pipe with it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The tool is aluminum alloy, softer than steel, copper or brass pipe, so the teeth would blunt before they cut. It is made for plastic: PPR, PVC and MPP.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat drill do I need?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eAny corded or cordless drill whose chuck closes on the 1.97 in (50 mm) shaft. What matters more is speed: use the low gear and a light trigger. Plastic melts if you rush it, and a melted thread will not hold.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow do I switch from outside to inside threads?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMove the drive shaft to the other end of the tool. From one end the cup faces the work and cuts a male thread on the pipe; from the other, the tap nose faces out and cuts a female thread in a bore or socket. The maker's step-by-step photo above shows both setups.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan it thread the inside of a fitting?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes — a plain slip socket on an elbow, tee or coupling of the matching size. Clamp the fitting firmly first; it will try to spin with the tool.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow much thread should I cut?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOnly as much as the fitting takes. Every extra turn is more wall taken out for no benefit. Screw the fitting on by hand as a test — when it bottoms out with thread to spare, you have cut enough.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich option should I buy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMeasure first. About 0.79 in (20 mm) across: the 1\/2 in. About 0.98 in (25 mm): the 3\/4 in. Both sizes in the same system: the set, which costs less than the two bought separately and comes with a shaft for each tool.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1\/2 in — for 20 mm pipe","offer_id":44157868146778,"sku":"NX-PIPETHREAD-12","price":12.95,"currency_code":"USD","in_stock":true},{"title":"3\/4 in — for 25 mm pipe","offer_id":44157868212314,"sku":"NX-PIPETHREAD-34","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Both sizes — 1\/2 in and 3\/4 in","offer_id":44157868179546,"sku":"NX-PIPETHREAD-SET","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-pipethread-hero.jpg?v=1790066023"},{"product_id":"faucet-sink-installer-wrench","title":"Faucet and Sink Installer Wrench — One Tool for Basin Nuts, Supply Lines and Strainers","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eUnder the sink\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe nut you cannot reach is the whole job.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA faucet is held on by nuts that sit up behind the basin, in the dark, in a gap the width of your wrist, with the supply lines running straight past them. A normal wrench cannot get on them and a socket cannot get over the line. This is a 25 cm bar with a slot down its whole length: it drops over the supply riser, slides up, and puts a socket on the nut above.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a plastic wrench, and that sets the limits.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe body is ABS with an aluminum insert in the head. That is enough for nuts that were put on by hand and for the everyday plastic and brass nuts under a sink. It is \u003cstrong style=\"color:#fff\"\u003enot\u003c\/strong\u003e the tool for a 20-year-old nut welded on by corrosion — that one wants penetrating oil, a steel basin wrench, or a cut-off tool. Lean on this one hard enough and the plastic is what gives.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eTwo things to check before you order: \u003cstrong style=\"color:#fff\"\u003ewhat shape your nuts are\u003c\/strong\u003e (there is a chart further down — four common types fit, two do not) and \u003cstrong style=\"color:#fff\"\u003ewhat size they are\u003c\/strong\u003e. The openings are metric: 21, 24 and 28 mm in the head, plus cups for 34–35 and 40 mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sf51d039e96d443ee8c3b5f62cec99f85n.webp\" alt=\"The red faucet and sink wrench with its two socket cups, screw extractor and screws\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eAbout 25 cm long\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e9.6 in — reach without a second hand\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSlotted body\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003ePasses over the supply line\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e21 \/ 24 \/ 28 mm head\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003ePlus 34–35 and 40 mm cups\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eBubble level built in\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFor lining a fixture up as you set it\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sf721ad03cb1c4935a2c28c74767034cc9.webp\" alt=\"The wrench is 245 mm long and 50 mm across the head, with a bubble level and a slotted body\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe slot\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhy it is cut open down the side\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eLook at the second view: the body is hollow with a channel running its full length. That is not styling. The mounting nut you want is directly above the supply line that is screwed into the same shank, so a closed socket can never be dropped onto it. This one goes on sideways — the line passes through the slot, the socket ends up on the nut, and you turn the bar.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth ends work. The aluminum insert in the head takes 21, 24 and 28 mm; the tail end is a smaller square that reaches into the tighter spots, and the two red cups push on for the big 34–35 and 40 mm nuts.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S791da9c6fb8f4b3eb05b74651c0f4abfV.webp\" alt=\"The wrench turning faucet nuts, shut-off valves, supply-line nuts and a strainer basket\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it turns\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFour nuts you meet on nearly every job\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eFaucet mounting nuts\u003c\/strong\u003e behind the basin. \u003cstrong\u003eSupply-line coupling nuts\u003c\/strong\u003e where the braided hose meets the shank or the valve. \u003cstrong\u003eShut-off valve packing nuts\u003c\/strong\u003e on the wall. \u003cstrong\u003eSink strainer and basket nuts\u003c\/strong\u003e under a kitchen sink.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eSame handful of sizes, same awkward angle every time. That is the case for one purpose-shaped bar instead of a basin wrench, two open-ends and a pair of pliers you cannot swing anyway.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sa929444b3959457d9f3c08e2cb5b5034j.webp\" alt=\"Which faucet nuts fit: types A to D fit, types E and F do not\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCheck yours first\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFour nut shapes fit, two do not\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThis is the maker’s own compatibility chart and it is the most useful picture on the page. The four that fit are the ones with flats or lugs to grip: plain brass hex and ring nuts, the ribbed plastic flange nut, the coupling nuts on braided supply lines, and the brass flange nut with tabs.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe two crossed out are a deep black plastic nut and a smooth round chrome one. Take a photo of yours with a phone before you buy — getting under there twice is the part nobody enjoys.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S55b3d776084c49e399ba3b1ce88895beT.webp\" alt=\"The screw extractor in the tail of the wrench, for removing a damaged screw\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe extractor\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFor the screw head you already rounded off\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA 75 mm T-handled extractor rides in the tail of the wrench. Its coarse reverse thread bites into a chewed-up screw or a broken stud and backs it out as you turn counter-clockwise.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eIt is a small extractor for small fasteners — the ones in a faucet handle, an escutcheon or a bracket. A seized machine screw in steel is a job for a drill and a proper extractor set, and forcing this one just snaps it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb953647231fe4b0cb1dfc276c4b755e68.webp\" alt=\"What is in the 14-in-1 kit: the wrench, two socket cups, two multi-size adapters, extractor and screws\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003e8-in-1 or 14-in-1\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe difference is two adapters\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eBoth kits are the same wrench, the same aluminum head, the same level, the same screw extractor and screws, and the same two push-on cups for 34–35 and 40 mm nuts.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe \u003cstrong\u003e14-in-1\u003c\/strong\u003e adds two more push-on adapters, marked by the maker at 16 \/ 18 \/ 28 mm and 20 \/ 22 \/ 44 mm. If the nuts you already know about are covered by the sizes in the 8-in-1, the smaller kit is the whole tool; the 14-in-1 is for not knowing yet.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhat it is not\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThere is no ratchet in it.\u003c\/strong\u003e Listings for this tool elsewhere describe a ratchet mechanism and a double-headed handle. Look at the photos: it is a moulded bar with sockets at both ends. You turn it, let go, and take a fresh grip, the same as any T-bar.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not insulated and carries no rating.\u003c\/strong\u003e Some sellers list “insulated” among the features. There is no insulation rating here and no certification, so treat it as an ordinary hand tool and keep it away from anything live.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not a torque tool.\u003c\/strong\u003e Plastic nuts under a sink want hand-tight plus a nudge. This bar makes it easy to go well past that and crack a plastic nut or a flange.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNever put a pipe over it for more leverage.\u003c\/strong\u003e On a steel wrench that is a bad habit; on an ABS body it is how the tool ends up in two pieces with your knuckles against the cabinet.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eThe maker’s own numbers disagree.\u003c\/strong\u003e Its drawings put the length at 245, 250 and 253 mm on different images, and label the smaller cup 34 mm in one place and 35 mm in another. We quote it as \u003cstrong\u003eabout 25 cm\u003c\/strong\u003e and \u003cstrong\u003e34–35 mm\u003c\/strong\u003e rather than pick the flattering number. Measure your nut across the flats.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S3f3a3f1c0b4941c9ae4970251dd5160fa.webp\" alt=\"Jobs it is used on: water heater, basin inlet, toilet inlet, kitchen sink, bath plumbing\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#F3A26D;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eBefore you loosen anything\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eClose both shut-off valves, open the faucet, and let the pressure go.\u003c\/strong\u003e Keep a bucket and a towel under the joint — a supply line holds water after the valve is shut.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eIf a shut-off valve will not turn or will not seal, stop.\u003c\/strong\u003e That is now a valve job, and the main has to come off first. An old multi-turn valve that has not moved in a decade often will not reseat.\u003c\/p\u003e\n      \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eEye protection, and a light you do not have to hold.\u003c\/strong\u003e You will be looking straight up into whatever falls off. Braided lines that are rusted at the ferrule get replaced, not reused.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAbout 25 cm (9.6–10 in); the maker’s drawings say 245, 250 and 253 mm\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eHead\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e50 mm (2 in) across; aluminum alloy insert with 21, 24 and 28 mm openings (13\/16, 15\/16 and 1-3\/32 in)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eTail\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e28 mm (1-3\/32 in) square end, and the socket for the screw extractor\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003ePush-on cups\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e34–35 mm and 40 mm (about 1-11\/32 and 1-9\/16 in) — both kits\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eExtra adapters\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e14-in-1 only: two more, marked 16 \/ 18 \/ 28 mm and 20 \/ 22 \/ 44 mm\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eScrew extractor\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e75 mm T-handle with a reverse thread, carried in the tail\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eLevel\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA bubble vial set into the body\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eABS body, aluminum alloy head insert\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe wrench, two push-on cups, the screw extractor and two screws — plus two more adapters on the 14-in-1\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eNothing needed for the job beyond it, but a bucket, a towel and a flashlight help\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA torque figure, the alloy grade and any insulation rating — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my faucet?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eCheck the shape against the chart above, then the size. Four common nut shapes fit and two do not. The openings are 21, 24, 28, 34–35 and 40 mm, with two more adapters on the 14-in-1 kit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eMy nuts are in inches. What do the metric sizes work out to?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003e21 mm is about 13\/16 in, 24 mm about 15\/16 in, 28 mm about 1-3\/32 in, 34–35 mm about 1-11\/32 in and 40 mm about 1-9\/16 in. Measure across the flats of your nut and compare — a socket that is a hair too big rounds a plastic nut off fast.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003e8-in-1 or 14-in-1?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eSame wrench. The 14-in-1 comes with two extra push-on adapters covering 16 \/ 18 \/ 28 mm and 20 \/ 22 \/ 44 mm. If the nuts you are going after are inside the 8-in-1 sizes, the smaller kit does the job.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it have a ratchet?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo, whatever other listings say. It is a solid moulded bar with sockets at each end. In a tight cabinet you turn it as far as the space lets you, lift it off and start again.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it shift a nut that is rusted on?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOften not. Plastic gives before a corroded steel or brass nut does. Spray a penetrating oil, leave it, try again — and if it still will not move, that is a steel basin wrench or a cutting job, not this one.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes the slot really pass over the supply line?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThat is the whole design. The channel runs the length of the body so the tool can come in from the side of a riser rather than down over it, which is what puts a socket on a nut you cannot see.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it strong enough for a kitchen strainer basket nut?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor a basket nut that was hand-tightened and has not seized, yes — that is one of the jobs it is shaped for. For one that has been locked in place by years of hard water, use a steel basket wrench.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is the level for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eSetting a fixture straight while you tighten it — a faucet body, a shower arm, a valve escutcheon. It is a rough bubble vial, useful for eyeballing, not a substitute for a real level on cabinetry.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I put it on a drill or an impact?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. There is nothing to drive it with, and powered torque on a plastic bar and a plastic nut ends the same way every time.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"8-in-1 kit","offer_id":44165316247642,"sku":"NX-SINKWRENCH-8","price":22.95,"currency_code":"USD","in_stock":true},{"title":"14-in-1 kit","offer_id":44165316280410,"sku":"NX-SINKWRENCH-14","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sf51d039e96d443ee8c3b5f62cec99f85n.webp?v=1790149670"},{"product_id":"pivot-head-ratchet-screwdriver","title":"Pivot-Head Ratchet Screwdriver — 180° Swing Head, 8 Bits and 5 Sockets Stored in the Handle","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eFor the screw you can’t get square to\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eA screwdriver that bends at the neck and carries its whole kit in the handle.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eMost screws are easy. The awkward ones sit at the back of a cabinet, under a sink or tight against a wall, where a straight screwdriver needs your hand to be somewhere it can’t go. The head of this one swings on a joint up to 90° to either side. A collar marked with the ratchet settings lets you keep turning without letting go. And the handle opens to hold eight bits, five small sockets and the adapter that drives them.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a hand screwdriver for small fasteners.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eIt is not a socket wrench and it is not an impact driver. The five sockets are small \u003cstrong style=\"color:#fff\"\u003emetric\u003c\/strong\u003e sizes, \u003cstrong style=\"color:#fff\"\u003e6 to 10 mm\u003c\/strong\u003e, for the nuts and bolt heads on furniture, appliances and fixtures. There are no inch-size sockets in the set. And the grip is a screwdriver handle, so a rusted or seized fastener needs a proper wrench, not this.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-hero.jpg\" alt=\"Pivot-head ratchet screwdriver with a green handle, gold ratchet collar and chrome joint\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSwings 90° each way\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eA 180° arc for the head\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e3-mode ratchet\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eTighten, locked, loosen\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e14 pieces inside\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e8 bits, 5 sockets, 1 adapter\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e193 mm long\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e7.6 in, head straight, no bit fitted\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-angle.jpg\" alt=\"The head bent to a right angle, driving a screw into a wooden post\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eRound the corner\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003ePut the handle where your hand fits\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA joint sits between the handle and the bit holder, and the head swings on it to either side, as far as a right angle — a 180° arc in all. Straight, it is an ordinary in-line screwdriver. Bent over, it becomes an L: the handle stays clear of the cabinet side or the wall while the bit meets the screw straight on.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe maker shows it straight, at 45° and at 90° each way. For a stubborn screw, straighten the head if there is room: that is where you can push hardest along the bit, and the joint is not being asked to hold an angle.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eGot a whole row of screws in a tight spot? Our \u003ca href=\"\/products\/right-angle-drill-attachment\" style=\"color:#E5622A\"\u003eright-angle drill attachment\u003c\/a\u003e does the same job on a drill.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-collar.jpg\" alt=\"The gold ratchet collar with its direction marks, and a Phillips bit in the holder\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe ratchet\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eTurn, swing back, turn again\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe gold-colored collar behind the bit holder is marked with the ratchet settings: an arrow each way and a dot between them. Set to tighten or loosen, the bit drives one way and the handle clicks back freely the other. You twist, relax your wrist and twist again, without re-gripping or lifting the bit out of the screw.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe middle setting locks the ratchet and the driver turns solid in both directions, like a plain screwdriver. That is the one to use when you want to feel exactly what a screw is doing — the first turns into a fresh hole, or the last snug quarter-turn on a hinge.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-storage.jpg\" alt=\"The handle opened: two green covers swing out, bits on one face of the core and sockets on the other\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eIn the handle\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eOpen it, and the whole kit is there\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003ePush the latch next to the nose and the two covers of the grip swing apart. One face of the core holds the eight bits and the socket adapter, each in its own slot with its label printed beside it; the other face holds the five sockets.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eClose it and the whole set goes into a toolbox, the glove box or the kitchen junk drawer as one piece: no loose bits, and no hunting for the size you need.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-set.jpg\" alt=\"The five sockets, 10 to 6 mm, above the socket adapter and the eight bits\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat’s inside\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eEight bits, five sockets, one adapter\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eBits:\u003c\/strong\u003e Phillips PH0, PH1 and PH2; slotted 3 mm and 6 mm; a T15 star (Torx-style); 5 mm hex; and a U6 fork tip. They are ordinary ¼ in (6.3 mm) hex-shank bits, so other ¼ in bits you already own fit the holder too.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eSockets:\u003c\/strong\u003e 6, 7, 8, 9 and 10 mm. The adapter goes into the bit holder like a bit, and the sockets push onto its square end, where a spring ball holds them. That is “14 in 1”: fourteen pieces, one handle.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFive things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe magnet is the maker’s claim, not ours.\u003c\/strong\u003e The maker’s listing calls it magnetic, but none of their pictures shows the magnet at work — a screw hanging from the bit, say — and we haven’t tested a unit. Plan on starting a screw with your fingers, the way you would with any screwdriver.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eWe can’t tell you how firmly the head holds an angle.\u003c\/strong\u003e The maker shows it straight, at 45° and at 90°, but doesn’t say whether it locks there or how hard you can push before it moves. For anything stubborn, straighten it.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThere is no torque rating.\u003c\/strong\u003e The maker does not publish one, so we do not quote one. Treat it as what it is: a screwdriver with a clever head, driven by your wrist.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not insulated.\u003c\/strong\u003e The head, holder and sockets are bare metal. Switch the power off at the breaker before you touch an outlet, a switch or a light fixture.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eThe pictures are the maker’s, not our photographs.\u003c\/strong\u003e Most look like computer renders, and small details differ between them: the lettering on the handle (including the model code in our lead image), the engravings on the bits, the finish of the collar. Treat those as indicative. Most of them show the green version; the maker’s pictures of the orange and red ones are the same render in another color. The bit list and the five socket sizes agree wherever the maker labels them.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eGetting the most from it\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eMatch the bit to the screw.\u003c\/strong\u003e A PH1 in a PH2 screw slips and chews the head. If the bit wobbles in the recess, try the next size up.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003ePress, then turn.\u003c\/strong\u003e Many stripped screws come from too little push rather than too much twist. With the head straight, lean in on the handle. With it bent over, steady the head behind the bit with your other hand instead of pushing on the handle.\u003c\/p\u003e\n      \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eClose the handle after use.\u003c\/strong\u003e Put each bit back in its labeled slot and close the covers, and the set stays complete.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-spec.jpg?v=1790149740\" alt=\"193 mm (7.6 in) long with no bit fitted; the head swings up to 90 degrees either way; ratchet tighten, locked or loosen; 8 bits, 5 sockets and a socket adapter in the handle\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e193 mm (7.6 in) with the head straight and no bit in the holder, maker’s figure\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eHead\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eSwings up to 90° to either side of straight (a 180° arc)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eRatchet\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eThree settings, marked on the collar: tighten, locked, loosen\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eBit holder\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e¼ in (6.3 mm) hex, maker’s figure\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eBits (8)\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003ePH0, PH1, PH2 · SL3, SL6 · T15 · H5 · U6; marked CR-V (chrome vanadium)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eSockets (5)\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e6, 7, 8, 9 and 10 mm, metric\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eSocket adapter\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e¼ in hex shank to a square drive with a spring ball\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eStorage\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eInside the handle; a latch opens two covers\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eColors\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eGreen, orange or red handle; black nose and end cap and a gold-colored collar on all three\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eWeight\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e275 g (9.7 oz), maker’s figure; the maker doesn’t say whether that includes the bits and sockets\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eThe screwdriver, 8 bits, 5 sockets and the socket adapter\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eA torque rating, whether the head locks at each angle, and the size of the adapter’s square drive — so we do not quote them\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it as a normal straight screwdriver?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes. With the head straight it works like any in-line screwdriver, and with the ratchet on the middle setting it turns solid both ways, with no clicking.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill my other bits fit?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, if they have a standard ¼ in hex shank, like most screwdriver and drill-driver bits. Round-shank bits won’t fit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eAre the sockets metric or inch sizes?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMetric: 6, 7, 8, 9 and 10 mm. There are no inch sizes in the set. Use them on metric nuts and bolt heads only.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill my own sockets fit the adapter?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWe can’t promise it. The maker doesn’t give the size of the adapter’s square end. The “6.3 mm” in one of their pictures matches the ¼ in hex shank that goes into the holder, not necessarily the square. The five sockets in the set are the ones shown fitting it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the bit holder magnetic?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker’s listing says so. Nothing in their pictures shows it and we haven’t tested a unit, so we do not promise it. Start screws by hand.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it good for car or motorcycle work?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor light jobs: interior trim screws, small covers, and metric nuts and bolt heads that take a 6 to 10 mm socket — that is the size across the head, not the bolt’s thread. It does not replace a ratchet wrench, and anything tight, rusted or torqued to a figure needs a proper wrench. Keep the bare metal away from battery terminals.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on outlets and switches?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOnly with the power off at the breaker. The tool is not insulated.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow does the storage open?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePush the latch next to the black nose, and the two covers swing out, hinged at the butt end of the handle. Fold them back together to close.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat does “14 in 1” count?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe pieces that go with the handle: 8 bits, 5 sockets and 1 socket adapter. The screwdriver itself is the “1”.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Green","offer_id":44165570068570,"sku":"NX-RATCHETSD-14-GN","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Orange","offer_id":44165570003034,"sku":"NX-RATCHETSD-14-OR","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44165570035802,"sku":"NX-RATCHETSD-14-RD","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ratchet14-hero_bd7b313e-b9be-47da-93ce-4768a307673e.jpg?v=1790152681"},{"product_id":"tire-repair-kit-rubber-cement","title":"Tire Repair Kit with Rubber Cement — Strips, Screw-In Plugs and T-Handle Tools for Tubeless Tires","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eRoadside repair\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eTwo ways to seal a puncture, and the cement that makes both of them work.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA rasp and an inserter on 13.5 cm T-handles, a stack of 105 mm rubber strips, a set of screw-in rubber plugs, and tubes of rubber cement — the ingredient most cheap kits leave out. Ream the hole, wet the strip with cement, push it through, trim it flush. The wheel stays on the car and you are moving again in ten minutes.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: a plug is a get-you-home repair, not a permanent one.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe US tire industry is unambiguous about this. A proper repair means \u003cstrong style=\"color:#fff\"\u003etaking the tire off the rim\u003c\/strong\u003e, inspecting the inside for damage you cannot see from outside, filling the hole and sealing the innerliner with a patch. A strip or a plug pushed in from outside, on its own, is \u003cstrong style=\"color:#fff\"\u003enot an acceptable permanent repair\u003c\/strong\u003e — it is what gets you off the shoulder and to a tire shop, which is a genuinely useful thing at 9 p.m. on a Sunday.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe limits that come with it: \u003cstrong style=\"color:#fff\"\u003etubeless tires only\u003c\/strong\u003e, \u003cstrong style=\"color:#fff\"\u003etread area only\u003c\/strong\u003e — never a sidewall or a shoulder — and \u003cstrong style=\"color:#fff\"\u003enothing bigger than 1\/4 in (6 mm)\u003c\/strong\u003e. A tire that has been driven on flat is damaged inside and does not get plugged at all.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sd9e77df4864d49ab9c66609bcc62bf67r.webp\" alt=\"The kit unpacked on a bench: zip case, gloves, rubber strips and the T-handle tools\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eCement included\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eTwo 12 ml tubes, four in the 57\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eStrips and plugs\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eBoth methods in one case\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eTwo sets\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e25 pieces or 57 pieces\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eWheel stays on\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eNo jack, no tire machine\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-tirefix-fits_40e86ef4-6dbe-48da-827e-fc28516089a9.jpg\" alt=\"Car, motorcycle and bicycle tires, and the screw-in rubber plugs - the kit suits any of them provided the tire is tubeless\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it fits\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eCar, motorcycle, bike — if the tire is tubeless\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe method is the same on all three: the strip or the plug seals against the inside of the tire itself, with the wheel still on the vehicle. What decides whether it works is not what you are riding or driving — it is whether there is an inner tube in there.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eTubeless\u003c\/strong\u003e — nearly all modern car, light truck, RV, trailer and ATV tires, and most modern motorcycle tires — yes. \u003cstrong\u003eTube-type\u003c\/strong\u003e — most bicycles, older motorcycles, some trailers and mowers — no: the hole is in the tube, and the tube has to come out and be patched or replaced. Worth two minutes checking yours before you order.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8a93c3687bef487eb784ffacb1297574Y.webp\" alt=\"Instructions: pull the nail, ream the hole, load a strip, push it in, trim the ends\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe strip method\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFive steps, and the reaming is the one that matters\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Find the leak and mark it — soapy water in a spray bottle makes it obvious. \u003cstrong\u003e2.\u003c\/strong\u003e Pull the nail with the pliers, noting the angle it went in at. \u003cstrong\u003e3.\u003c\/strong\u003e Work the spiral rasp in and out along that same angle, half a dozen times. This is not optional: it cleans the hole and roughs the rubber so the strip can key into it.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Thread a strip through the eye of the inserter so both ends are even, smear it with cement, push it in until about two-thirds is inside, then pull the handle straight out — the strip stays. \u003cstrong\u003e5.\u003c\/strong\u003e Trim the ends flush, reinflate, and check it with soapy water again.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sbd57028e7d4d409eabc8a39c0c614e89k.webp\" alt=\"Close-up of the rubber strips stretching, showing how soft and tacky they are\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhy the cement matters\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe tube most kits leave out\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA strip can go in dry, and plenty of people do it that way. Cement does two things that make the job easier and the repair better: it lubricates a very tight push through cold tread, and it swells and bonds the strip to the hole as it cures instead of relying on friction alone.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth sets include it — two 12 ml tubes in the 25-piece, four in the 57. Keep the tubes capped; once one has been opened and left, it skins over and the next repair is a dry one.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb2f0f6673d7045399e58769afd62f9d1I.webp\" alt=\"The screw-in rubber plugs, the other way to seal a puncture from outside\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe other method\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eScrew-in plugs, for when there is no time to ream\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe five black rubber cones in every set are the quicker, cruder option: smear one with cement, screw it into the hole by hand or with pliers, and cut it off level with the tread. No reaming, no threading a strip through an eye, and it works with cold hands in the dark.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eA word on sizes: the maker’s chart shows two cones — 1.2 cm on a 0.5 cm shank and 1.5 cm on a 0.7 cm shank — but its own set photos show \u003cstrong\u003efive identical cones\u003c\/strong\u003e, so we will not promise you get both. If the size decides it for you, \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003eask us\u003c\/a\u003e first. Same caveats as a strip either way: tread only, and get to a shop afterwards.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S37d3a3bbe2eb478b92093eab804998aej.webp\" alt=\"Sizes: T-handle tools 13.5 cm long, strips 105 mm, plugs 1.2 and 1.5 cm, pliers 13 cm, knife 15 cm\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe sizes\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eMeasured, and converted properly\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eBoth T-handles are \u003cstrong\u003e13.5 cm (5.3 in) long and 8 cm (3.1 in) across the grip\u003c\/strong\u003e — short enough to live in a door pocket, long enough to get your weight behind. The strips are \u003cstrong\u003e105 mm (4.1 in)\u003c\/strong\u003e. The pliers are \u003cstrong\u003e13 cm (5.1 in)\u003c\/strong\u003e and the knife \u003cstrong\u003e15 cm (5.9 in)\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eOne note on the maker’s own chart, which is in the gallery: a few of its inch conversions are simply wrong — it prints the 15 cm knife as “15.90 in” and the 1.2 cm plug as “0.74 in”. The millimetre figures are the right ones, and the inches above are ours.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhen not to use it\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNever on a sidewall or a shoulder.\u003c\/strong\u003e That part of the tire flexes on every rotation and no repair holds there. If the damage is not in the tread, the tire is finished — that is not us being cautious, it is the industry rule.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNever on a tire that has been run flat.\u003c\/strong\u003e Driving on a deflated tire wrecks the innerliner and the sidewall from the inside, and none of that shows from outside. Plugging it hides a tire that is about to come apart.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eTubeless only — and that includes the bicycle in the maker’s pictures.\u003c\/strong\u003e A strip seals against the inside of a tubeless tire. Most bicycles, and plenty of older motorcycles and trailers, run an inner tube: there the tube is what is leaking, and it has to come out and be patched or replaced. Check before you buy this for a bike.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNot a substitute for a shop visit on a road car.\u003c\/strong\u003e Get it properly repaired — demounted, inspected, patch-plugged — or replaced. Many tire warranties treat an outside-only plug as an unrepaired tire.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNo pump in any set.\u003c\/strong\u003e The strip seals the hole; it does not put the air back. You still need a compressor, a foot pump or a gas station.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eExpect to push hard.\u003c\/strong\u003e Getting the rasp and a loaded inserter through cold tread takes real force, which is what the gloves in the 57-piece set are for. That effort is normal; it is not the tool failing.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe two sets\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eExactly what is in each one\u003c\/h2\u003e\n\u003cp style=\"max-width:820px;margin:0 0 18px\"\u003eCounted off the maker’s own set photos, which are in the gallery. Both sets do the same repair with the same two T-handle tools, the same five screw-in plugs and the same zip case. The \u003cstrong\u003e25\u003c\/strong\u003e is the one that lives in a glovebox; the \u003cstrong\u003e57\u003c\/strong\u003e carries nearly three times the strips, twice the cement, and the hand tools you would otherwise be hunting for in the dark.\u003c\/p\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:700px\"\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:2px solid #E3E6EA;padding:12px 0;font-weight:600\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eIn the set\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e25 pcs\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e57 pcs\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eSpiral rasp + strip inserter\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e2\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e2\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eRubber repair strips\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e15\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e40\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eScrew-in rubber plugs\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e5\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e5\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eRubber cement, 12 ml tubes\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e2\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e4\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eZip case\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e✓\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e✓\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eWork gloves\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center;color:#9AA3AE\"\u003e—\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e✓\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eNeedle-nose pliers\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center;color:#9AA3AE\"\u003e—\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e✓\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:16px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:1.6\"\u003eAwl and utility knife\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center;color:#9AA3AE\"\u003e—\u003c\/div\u003e\n\u003cdiv style=\"flex:1;text-align:center\"\u003e✓\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#F3A26D;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eDoing it safely\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eGet off the road first.\u003c\/strong\u003e Well clear of moving traffic, hazards on, handbrake on, and the other wheels chocked if there is any slope. No repair is worth kneeling next to a live lane for.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eGloves on, and mind where the tools go when they break through.\u003c\/strong\u003e The rasp and the inserter come through the tread suddenly and both ends are sharp. Keep your other hand out of the line of travel.\u003c\/p\u003e\n      \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eReinflate to the pressure on the door placard\u003c\/strong\u003e — the sticker in the driver’s door jamb, not the number moulded into the tire, which is a maximum. Then recheck the repair with soapy water, and check the pressure again the next morning.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S5206a155e29746919169406d93803dbc0.webp\" alt=\"Pushing a rubber strip into a car tire tread with the T-handle inserter\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSets\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e25 pieces or 57 pieces\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eT-handle tools\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSpiral rasp and split-eye inserter, both 13.5 cm (5.3 in) long, 8 cm (3.1 in) across the grip\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eStrips\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e105 mm (4.1 in) long, supplied in sheets of five\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eScrew-in plugs\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFive per set. The maker’s chart shows two sizes — 1.2 cm cone on a 0.5 cm shank and 1.5 cm on a 0.7 cm shank — but its set photos show five of one size\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eRubber cement\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e12 ml tubes — two in the 25-piece set, four in the 57\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eHand tools\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eNeedle-nose pliers 13 cm, utility knife 15 cm, awl and gloves — in the 57-piece set only\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteel shafts and jaws with moulded grips — the maker’s own spec sheet says only “metal”\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eCase\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eZip-up moulded case, in every set\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSuits\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eTubeless tires — car, light truck, RV, trailer, ATV, tubeless motorcycle\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eDoes not suit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eTube-type tires, sidewall or shoulder damage, injuries over 1\/4 in (6 mm), tires driven on flat\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA pump or compressor, a pressure gauge, and a spare tire — still carry one\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eWhich of the two plug sizes ships in each set, the steel grade of the tools, the cement’s shelf life and the case dimensions — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich set should I buy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBoth fix a puncture the same way, so it comes down to what else you want with it. Take the \u003cstrong\u003e25\u003c\/strong\u003e if you already keep pliers, a knife and gloves in the car and you just want the repair gear. Take the \u003cstrong\u003e57\u003c\/strong\u003e if the car has nothing in it — it adds those three, plus 40 strips instead of 15 and four tubes of cement instead of two, which is the difference between one roadside fix and a kit you keep topping up from.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow long does a plug last?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePeople report plugs holding for years, and that is exactly why they are risky: a repair you stop thinking about is one nobody ever inspected from the inside. Treat it as temporary, get the tire demounted, inspected and patch-plugged at a shop, and let them tell you whether it is still good.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I repair a sidewall with it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. Nobody can. The sidewall flexes on every rotation and there is no repair rated for it — that tire gets replaced.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow big a hole is too big?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOver 1\/4 in (6 mm) in the tread is beyond repairable by any method. A nail or a screw is usually well under that; a bolt, a chunk of metal or a gash is not.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eStrip or screw-in plug — which is better?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe strip, if you have the time and the hole is a clean nail puncture: it fills the channel along its whole length. The plug is faster and needs no reaming, which matters when it is raining. Both are temporary.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it work on my bicycle?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOnly if your bike runs tubeless, which most do not. With an inner tube in there the tube is what has the hole in it, and no amount of plugging the tire will help. The maker’s images show a bicycle; we would rather you checked first.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it come with anything to reinflate the tire?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. No pump, no compressor and no gauge in either set. The air has to come from somewhere else.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo the strips go off?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThey harden with heat and time. Keep them sealed and out of the sun; a kit that has lived on a parcel shelf through two summers will have strips that have gone stiff, and a stiff strip will not seal. The cement skins over once opened, too.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I do it without taking the wheel off?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, that is the point of the kit — as long as you can reach the puncture. If it has stopped somewhere awkward behind a brake caliper, rolling the car forward a foot usually sorts it.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"25 pieces","offer_id":44165654282330,"sku":"NX-TIREFIX-25","price":32.95,"currency_code":"USD","in_stock":true},{"title":"57 pieces","offer_id":44165654184026,"sku":"NX-TIREFIX-57","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-tirefix-fits_40e86ef4-6dbe-48da-827e-fc28516089a9.jpg?v=1790156005"},{"product_id":"denture-bit-holder-screwdriver-set","title":"Denture Bit Holder Screwdriver Set — 28 Bits in a Teeth-Shaped Case, Stubby Handle, Optional Mini Ratchet","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eA bit set with a sense of humor\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eTwenty-eight screwdriver bits, stored as teeth in a set of red dentures.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eOpen the jaws and the bits stand in the gums like teeth, fourteen above and fourteen below. A short, chunky screwdriver handle sits in the lower jaw, and in the ratchet version a mini ratchet rides in the upper one. Close it, and the whole kit is a set of red dentures on the bench — which is the point if it’s going to a dentist, a hygienist or anyone who enjoys a tool that gets a laugh.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a joke of a case with a plain, working bit set inside.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe bits are ordinary hex-shank screwdriver bits for everyday screws — not a precision kit for phones or glasses. And the maker doesn’t print the bit sizes on anything we have seen, so we can’t list them. If you need a particular size, \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#fff\"\u003eask us\u003c\/a\u003e before you order.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-denturebits-open.jpg\" alt=\"Red denture-shaped case opened like a mouth, with screwdriver bits standing in both jaws like teeth\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e28 bits\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFourteen in each jaw\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eStubby handle\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eTakes one bit at a time\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eMini ratchet\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eIn the ratchet version\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e85 × 58 × 73 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eClosed case, 3.3 × 2.3 × 2.9 in\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-denturebits-compare.jpg\" alt=\"The two versions side by side: with the mini ratchet, and without it\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eTwo versions\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWith or without the mini ratchet\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eBoth come with the case, the 28 bits and the stubby handle. The ratchet version adds a small chrome ratchet with a bit hole in its head and a direction lever. A ratchet like this holds a bit in its head and turns it in short swings where a screwdriver can’t go in straight.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe maker shows the ratchet stored in the upper jaw, clipped on top of the closed case, and with its shank plugged into the handle. In their photo of the version without the ratchet, one slot is empty because its bit is in the handle — 28 bits either way.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-denturebits-size.jpg\" alt=\"Closed case 85 mm wide, 58 mm high and 73 mm deep; handle with the ratchet fitted 115 mm long\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSize\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eSmall enough for a drawer or a desk\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eClosed, the case measures 85 × 58 × 73 mm — about 3.3 × 2.3 × 2.9 in — by the maker’s figures.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eWith the ratchet fitted, the handle is 115 mm (4.5 in) long. The maker doesn’t give the handle on its own, so we don’t quote it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFive things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eCount on 28 bits.\u003c\/strong\u003e The maker calls the set “30-in-1”. In their photos, the ratchet version shows 28 bits in the case plus the handle and the ratchet; the version without the ratchet shows 27 bits in the case and one in the handle, with that bit’s slot empty.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eWe can’t list the bit sizes.\u003c\/strong\u003e No size is legible on any of the maker’s pictures. What we can see: slotted bits in several widths, cross-point bits (Phillips-type; we can’t tell Phillips from Pozidriv at that resolution) and security Torx bits with a hole in the center.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe magnet is the maker’s claim, not ours.\u003c\/strong\u003e Their listing says the handle holds bits magnetically. Their picture shows only the empty socket — nothing held by a magnet — and we haven’t tested a unit.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eSo is the steel.\u003c\/strong\u003e The listing says chrome vanadium. No bit in the pictures shows a legible stamp, so we don’t repeat it as fact.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eWe left out some of the maker’s pictures.\u003c\/strong\u003e One is a computer render with three handles (the kit has one); another is a collage of stock photos of people using other tools. Everything shown here is the maker’s photo of the kit itself.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eGetting the most from it\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003ePut each bit back in its tooth.\u003c\/strong\u003e Every slot in the gums holds one bit, so a gap shows you at a glance which one is missing.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eMatch the bit to the screw.\u003c\/strong\u003e A bit that wobbles in the recess slips and chews the head. Try the next size up.\u003c\/p\u003e\n      \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eKeep it away from small children.\u003c\/strong\u003e It looks like a toy, but the bits are small and pointed.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-denturebits-ratchet-kit-v2.jpg\" alt=\"The kit with the mini ratchet, seen from above: case open, 28 bits around the rim, the ratchet in the upper jaw and the stubby handle in the lower jaw\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eBits\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003e28, hex shank; slotted, cross-point (Phillips-type) and security Torx among them. Sizes not published\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eCase\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eRed, hinged, shaped like dentures; 85 × 58 × 73 mm (3.3 × 2.3 × 2.9 in) closed, maker’s figures\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eHandle\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eStubby; black with yellow inserts and a hex bit socket\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eMini ratchet\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eRatchet version only: chrome, with a bit hole in the head and a direction lever\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eHandle with the ratchet fitted: 115 mm (4.5 in), maker’s figure\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eBits: chrome vanadium steel, per the maker (not verified by us)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eMagnet\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eClaimed by the maker for the handle; not shown in their pictures\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eBits + handle: the case, 28 bits and the handle. With the ratchet: the same, plus the mini ratchet\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;column-gap:20px;row-gap:2px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 130px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 220px\"\u003eBit sizes, bit length, weight, the ratchet’s tooth count and any hardness figure — so we do not quote them\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it a toy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. It is a working screwdriver set in a novelty case. The bits are small and pointed, so keep it out of reach of young children.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich bits are included?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003e28 bits: slotted in several widths, cross-point (Phillips-type) and security Torx with a center hole. The maker doesn’t publish the sizes. If you need a specific one, email us before you order.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is the difference between the two versions?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe mini ratchet. Both have the case, the stubby handle and 28 bits by the maker’s photos.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill my own bits fit the handle?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe handle takes hex-shank bits. The maker doesn’t state the socket size, so we can’t promise that a particular bit will fit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the handle magnetic?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker says so. Their pictures don’t show it, and we haven’t tested one, so we don’t promise it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it a good gift for a dentist?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt’s made to be one: a working bit set shaped like dentures. The maker doesn’t mention a gift box, so we don’t promise one.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on outlets and switches?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eOnly with the power off at the breaker. The bits and the ratchet are bare metal, not insulated.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Bits + handle","offer_id":44165714378842,"sku":"NX-DENTUREBITS-H","price":24.95,"currency_code":"USD","in_stock":true},{"title":"Bits + handle + mini ratchet","offer_id":44165714346074,"sku":"NX-DENTUREBITS-HR","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-denturebits-open.jpg?v=1790159559"},{"product_id":"compression-sleeve-puller","title":"Compression Sleeve Puller — Pulls a Stuck 1\/2 in Ferrule Off Copper Without Cutting the Pipe","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eChanging a shut-off valve\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe old ferrule will not slide off. This pulls it.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA compression fitting works by squeezing a brass ring onto the copper. Once it has been tightened, that ring is swaged on — it will not come off over the end of the pipe, and neither will the nut behind it. So the usual answer is to cut the stub-out back, and then you are working with even less pipe than before. This tool seats inside the old fitting, takes the nut onto its own thread, and draws the whole lot straight off with a few turns of the T-handle.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a \u003cstrong style=\"color:#fff\"\u003e1\/2 in\u003c\/strong\u003e tool, and it pulls, it does not cut.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThis size fits the \u003cstrong style=\"color:#fff\"\u003e1\/2 in nominal compression fitting\u003c\/strong\u003e — the one on the inlet side of a standard angle stop, where the valve meets the copper coming out of the wall. It is \u003cstrong style=\"color:#fff\"\u003enot\u003c\/strong\u003e for the 3\/8 in outlet that the faucet riser screws onto, and not for PEX, CPVC or flare fittings.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eAnd the ring it pulls is \u003cstrong style=\"color:#fff\"\u003escrap once it is off\u003c\/strong\u003e. That is normal — you fit a new nut and a new ferrule with the new valve. Nobody reuses a swaged ring.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1b5acd9f006447ab93ca388e8a4c3144H_a4a76e1a-f214-4c7a-8528-99d04f320c30.webp\" alt=\"The compression sleeve puller: a T-handle screw with a threaded body and a collet nose\" style=\"width:100%;max-width:700px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eNo cutting\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe stub-out keeps its length\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e1\/2 in fittings\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe inlet side of an angle stop\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e16.9 cm long\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e6.65 in, with a 4 in T-handle\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSingles or packs\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eOne, two or three\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Scc120c2bb76f47fe95a7e2cb51aeb19bJ.webp\" alt=\"Four steps: remove the old fitting, seat the nose in the collar, thread the nut on, turn the handle\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eHow it works\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eFour turns, not a hacksaw\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Water off, valve opened to drain, old stop unscrewed and pulled clear — the nut and the ring stay behind on the copper. \u003cstrong\u003e2.\u003c\/strong\u003e Push the silver nose of the puller into the mouth of the pipe, right inside the old ferrule.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Run the old compression nut back onto the puller’s own threaded body, hand-tight against it. \u003cstrong\u003e4.\u003c\/strong\u003e Hold the body and turn the T-handle clockwise. The screw pushes against the pipe, the body pulls the nut, and the ring walks off the end. A few turns is all it takes.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sadf3b0163a3d4a6f84953d4cbbc822864_1523f297-4eb6-405c-a5b6-fd3e9563eb7b.webp\" alt=\"The ferrule and nut coming off a copper stub-out in the wall, undamaged\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it saves\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe inch of pipe you cannot get back\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eCut the stub-out to get rid of a stuck ferrule and you lose length every time. On a pipe that came out of the wall short to begin with — behind a vanity, under a kitchen sink, against a finished tile wall — two of those cuts and there is nothing left to clamp a new fitting onto. Then it is opening the wall, or a coupling and a stub extension.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe escutcheon matters too. Cut back and the new stop sits deeper, so the trim plate no longer covers the hole. Pulling the ring leaves the pipe exactly where the plumber left it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1d890335e46c470da7b48bd9f8a4dc3fI.webp\" alt=\"Before and after: a corroded compression ring removed without cutting the pipe\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOld and seized\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe ones that have been on twenty years\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA valve that has never been turned tends to come with a nut welded in place by corrosion and hard water. Those are exactly the ones worth pulling rather than cutting, because they are usually in the worst position to get a saw into.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBe honest with yourself about the limit, though: if the nut will not even start onto the puller’s thread, or the screw is taking real force and nothing has moved, stop. Some fittings are past it, and a cut is the safe answer — better that than a kinked stub-out and a wet floor.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-ferrule-pack3.jpg\" alt=\"Three compression sleeve pullers, the 3-pack\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOne, two or three\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eMost people need one\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eWe will say that plainly: for a single valve, or the two under a bathroom sink, \u003cstrong\u003eone puller\u003c\/strong\u003e is the whole job. Buy the single.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe \u003cstrong\u003e2\u003c\/strong\u003e and \u003cstrong\u003e3\u003c\/strong\u003e packs are for the cases where one is not enough — a plumber putting one in each van, a crew re-stopping a whole building, a landlord going through a block of units, or anyone who has learned that the way these tools die is a stripped thread on a nut that was never going to move. Then a spare in the box beats a second trip.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhat it will not do\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eOne size, and it is 1\/2 in.\u003c\/strong\u003e There is no 3\/8 in version in this listing, and 3\/8 in is what most faucet and toilet risers use on the outlet side of the stop. Check which end you are working on before you order.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt does not save the ferrule.\u003c\/strong\u003e The ring comes off deformed and the nut is usually chewed. Buy a new nut and sleeve, or a new valve that ships with them — they cost almost nothing and a reused ring is a leak waiting for you.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt needs pipe to work with.\u003c\/strong\u003e The nose has to go into the end of the stub-out and the nut has to reach the puller’s thread. A pipe cut flush with the wall, or one that is bent, out of round or split at the end, gives it nothing to hold.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eCopper, not plastic.\u003c\/strong\u003e A CPVC or PEX stub-out with a compression stop on it is a different job. So is a flare fitting, a sweated fitting and a push-fit — a push-fit comes off with a release clip, not a puller.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eThere is no published pulling force or steel spec.\u003c\/strong\u003e The maker gives none and we will not invent one. It is a zinc-plated steel body with a chromed T-bar; treat it as a hand tool, turn it by hand, and do not put a bar on the handle.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#F3A26D;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eBefore you start\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWater off at the main, not just at the stop\u003c\/strong\u003e — the stop is the thing you have decided you do not trust. Open a low faucet to drain the line and keep a towel and a bowl under the work.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eSupport the pipe.\u003c\/strong\u003e Hold the stub-out steady with your other hand or a wrench while you turn. A stub-out that twists in the wall can break a soldered joint you cannot see, and that leak will be inside the wall.\u003c\/p\u003e\n      \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eTurn the water back on slowly\u003c\/strong\u003e and watch the joint for a few minutes, then check again an hour later. If your building needs a licensed plumber for this work, it still does.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1b803199260a4961a3307ad0b624f082h.webp\" alt=\"Used on corroded and seized fittings under a sink, behind a toilet and at a dishwasher\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eFits\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/2 in nominal compression fittings on copper — the inlet side of a standard angle stop\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eDoes not fit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e3\/8 in compression, flare, sweat, push-fit, PEX and CPVC\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e16.89 cm (6.65 in) overall\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eT-handle\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e10.16 cm (4 in) across, sliding bar\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eBuild\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eZinc-plated steel body and screw, chromed T-bar, steel nose\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003ePacks\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne, two or three pullers — identical tool, just the count\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eReplacement nuts and ferrules, the new valve, and thread tape\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA pulling-force rating, the steel grade and the thread spec — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs my fitting 1\/2 in or 3\/8 in?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eLook at which end you are fighting. The pipe coming out of the wall into the valve is almost always 1\/2 in nominal copper — that is this tool. The small chrome or braided line running up to the faucet or toilet is 3\/8 in, on the other end of the same valve. If you are pulling a ring off the wall pipe, you want 1\/2 in.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I reuse the nut and ring?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The ring is deformed by design and the nut has been dragged over a thread it was never meant to meet. New nut, new sleeve — most new angle stops come with both.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it damage the copper?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eUsed as intended, no — that is the whole point of it. It goes wrong when the nose is not seated properly inside the pipe, or when the stub-out is left to twist while you turn. Seat it, hold the pipe, go steadily.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat if it will not budge?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBack it off and look. Often the nut is not square on the thread, or there is grit behind the ring. If the screw is taking serious force and nothing has moved, cut the pipe instead — forcing it risks the joint inside the wall, which is a much worse afternoon.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it work on a stub-out that is very short?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt needs enough pipe for the nose to go in and for the old nut to reach the puller’s thread. If the copper barely clears the escutcheon you may not have that, and a short stub is also the case where cutting hurts most — worth measuring first.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy would I buy two or three?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYou probably would not. One does a house. The packs are for trade buyers who want one in every van or on every job box, and for anyone re-stopping a building where a lost or stripped tool means a second trip.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs a puller better than just cutting the pipe?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWhere you have plenty of stub-out and easy access, cutting is quicker. Where the pipe is short, boxed in, tiled around or already cut once, pulling is the only way to keep the fitting where it is. That is when this earns its place in the bag.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo I need any other tools?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eAn adjustable wrench for the old nut, a towel and a bowl, and the new valve with its nut and sleeve. Nothing else.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1 piece","offer_id":44894697586778,"sku":"NX-FERRULE-1","price":29.95,"currency_code":"USD","in_stock":true},{"title":"2 pieces","offer_id":44894748344410,"sku":"NX-FERRULE-2","price":50.95,"currency_code":"USD","in_stock":true},{"title":"3 pieces","offer_id":44894748377178,"sku":"NX-FERRULE-3","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1b5acd9f006447ab93ca388e8a4c3144H_a4a76e1a-f214-4c7a-8528-99d04f320c30.webp?v=1790178942"},{"product_id":"angle-stop-wrench-set","title":"Angle Stop Wrench Set — Ratcheting 5\/8 and 15\/16 in Supply Nuts, 3\/8 and 1\/2 in MPT Valve Bodies","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eUnder the sink\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eTwo wrenches shaped for the one place a normal wrench cannot swing.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eAn angle stop sits three inches off the wall behind a cabinet panel, with a supply line running out of it and a drain trap in the way. A crescent wrench has nowhere to turn, and pliers round off a chrome nut in two pulls. These two are cut for that space: a \u003cstrong\u003eratcheting angle-on wrench\u003c\/strong\u003e that slips over the supply line and turns the nut in short strokes, and a \u003cstrong\u003edouble-ended socket bar\u003c\/strong\u003e that drops over the valve body itself to hold it still or back it out.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: check your four sizes.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eEverything here is fixed-size, not adjustable-to-anything. The wrench ends take \u003cstrong style=\"color:#fff\"\u003e5\/8 in\u003c\/strong\u003e and \u003cstrong style=\"color:#fff\"\u003e15\/16 in\u003c\/strong\u003e supply nuts. The socket bar takes \u003cstrong style=\"color:#fff\"\u003e3\/8 in\u003c\/strong\u003e and \u003cstrong style=\"color:#fff\"\u003e1\/2 in MPT\u003c\/strong\u003e angle stop bodies. Those are the common American sizes and they cover most stops you will meet — but measure yours before you order rather than after.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe set is sold one way only, and it is the complete one: both wrenches plus a \u003cstrong style=\"color:#fff\"\u003e1\/2 in compression sleeve puller\u003c\/strong\u003e, two abrasive pads and a pouch. Nothing to choose between, nothing to add later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8cfd35865a3845ebafedd61e4e0cc2e3A.webp\" alt=\"The full kit: the red angle-on wrench, the black socket bar, the sleeve puller, a pouch and two P180 pads\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eRatcheting\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eShort strokes, no room needed\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eOpen jaw\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eGoes on over the supply line\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eFour sizes\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e5\/8, 15\/16, 3\/8 and 1\/2 in MPT\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e23 and 15 cm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e9 in and 5.9 in, both flat\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S5b0efc738ce64cacbee7d7d30e195924N.webp\" alt=\"Ends explained: 3\/8 and 1\/2 in MPT valve bodies on the bar, 5\/8 and 15\/16 in supply nuts on the wrench\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhich end does what\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eOne turns the nut, one holds the valve\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe \u003cstrong\u003ered angle-on wrench\u003c\/strong\u003e is the nut tool. Its two ends are ratcheting rings with a slot cut through them, so you feed the supply line in sideways and drop the ring onto the nut — \u003cstrong\u003e5\/8 in\u003c\/strong\u003e on one end, \u003cstrong\u003e15\/16 in\u003c\/strong\u003e on the other. Then it works like any ratchet: swing, click back, swing again, in whatever few degrees the cabinet gives you.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe \u003cstrong\u003eblack bar\u003c\/strong\u003e is the valve tool. Both ends are deep sockets sized to the \u003cstrong\u003e3\/8 in\u003c\/strong\u003e and \u003cstrong\u003e1\/2 in MPT\u003c\/strong\u003e threaded bodies of a standard angle stop. Use it to counter-hold the valve while you crank the nut, or to wind the whole stop off the stub-out.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S9177dcb11319497ba0b84718bfa911bdm_7d218474-11f2-4455-9a78-78296d96cda6.webp\" alt=\"Where it is used, and what is in the set: one angle-on wrench and one angle stop wrench\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCounter-hold\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe habit that saves the pipe in the wall\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe single most expensive mistake on this job is torquing the supply nut without holding the valve. The force goes straight past the stop, into the stub-out, and into a soldered joint you cannot see behind the drywall. You will not know you broke it until you turn the water on.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eTwo tools means two hands doing the right thing: the bar on the valve body going one way, the wrench on the nut going the other, and nothing at all reaching the pipe. That is the real reason a set like this exists rather than a single wrench.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S4c7a31d26e124a35932dde7d6f28d555q.webp\" alt=\"Sizes: 23 cm (9 in) wrench and 15 cm (5.9 in) bar, both flat enough for a toolbag\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe sizes\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eLong enough for leverage, thin enough to get in\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe wrench is \u003cstrong\u003e23 cm (9 in)\u003c\/strong\u003e and the bar \u003cstrong\u003e15 cm (5.9 in)\u003c\/strong\u003e. That is deliberate: the wrench gives you a real handle for a nut that has been on since the house was built, while the bar is short enough to spin in the gap between the valve and the cabinet floor.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth are flat sections rather than round handles, so they sit in a tool bag pocket instead of rolling around a tray. Steel with a lacquered finish — the red one is painted, the bar is coated.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8df3bc93de284649b98877e65c19b34ff.webp\" alt=\"The 1\/2 in compression sleeve puller included in the full kit\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat the full kit adds\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe puller, the pads, the pouch\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eGetting the old stop off is half the job; the old \u003cstrong\u003ecompression ring is still swaged onto the copper\u003c\/strong\u003e and will not slide over the end. The full kit includes the \u003cstrong\u003e1\/2 in sleeve puller\u003c\/strong\u003e for exactly that — it seats in the pipe, takes the old nut on its own thread, and draws the ring off, so you keep the stub-out at its original length instead of cutting it back.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eTwo \u003cstrong\u003eP180 abrasive pads\u003c\/strong\u003e come with it for cleaning the copper before the new ferrule goes on, and a pouch to keep the lot together. If you already own a 1\/2 in puller you will end up with a spare, because the set is not sold without it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhat it will not do\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not adjustable.\u003c\/strong\u003e Four fixed sizes, and that is the whole range. A 7\/8 in nut, a metric fitting or an oddball import valve will not fit any of the four ends, and forcing a ring onto a nut it does not match is how you round the nut off.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe bar needs a hex on the valve body.\u003c\/strong\u003e Most compression angle stops have one. Some quarter-turn and push-fit valves have a smooth or oddly shaped body, and there the socket has nothing to grip.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt does not replace a basin wrench.\u003c\/strong\u003e Faucet mounting nuts up behind the basin are a different tool and a different reach. This set is for the valve and the supply nuts at the wall.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe puller in the set is 1\/2 in only.\u003c\/strong\u003e It takes the half-inch compression ferrule off a copper stub-out, which is the usual one at the wall. A 3\/8 in ferrule on the outlet side of a stop needs a different puller, and there is not one in this kit.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eNo torque rating and no steel grade published.\u003c\/strong\u003e The maker gives neither and we will not invent them. It is a hand tool: turn it by hand, do not put a pipe on the end, and if a nut will not move, penetrating oil and patience beat force.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#F3A26D;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eBefore you start\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWater off at the main, not just at the stop.\u003c\/strong\u003e The valve you are replacing is the one you have already decided not to trust. Open a low faucet to drain the line, and keep a towel and a bowl under the work.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAlways counter-hold.\u003c\/strong\u003e Bar on the valve body, wrench on the nut, opposing each other. Never let the turning force reach the stub-out.\u003c\/p\u003e\n      \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eTurn the water back on slowly\u003c\/strong\u003e and watch the joint for a few minutes, then check again an hour later and once more the next morning. If the work needs a licensed plumber where you live, it still does.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S3340b64c11c24844b1b9e1e783444063I.webp\" alt=\"The kit with the angle-on wrench in use on a faucet shank under a sink\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAngle-on wrench\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRatcheting, slotted ring ends for 5\/8 in and 15\/16 in supply nuts — 23 cm (9 in)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAngle stop wrench\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eDouble-ended socket bar for 3\/8 in and 1\/2 in MPT valve bodies — 15 cm (5.9 in)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAlso in the kit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/2 in compression sleeve puller, two P180 abrasive pads and a pouch\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eBuild\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteel, lacquered finish\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSuits\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCompression angle stops with a hex body, and the supply nuts either side of them\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eDoes not suit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eNut and body sizes outside those four, smooth-bodied valves, and faucet mounting nuts\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe replacement valve, new nuts and ferrules, thread tape and a basin wrench\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA torque rating, the steel grade and the ratchet tooth count — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the sleeve puller really part of the set?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes. Every set on this page is the four-piece kit: the two wrenches, the \u003cstrong\u003e1\/2 in compression sleeve puller\u003c\/strong\u003e, two P180 abrasive pads and the pouch. We do not sell the wrenches on their own.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my valve?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMeasure the hex on the valve body and the supply nuts. The bar is 3\/8 in and 1\/2 in MPT; the wrench is 5\/8 in and 15\/16 in. Those are the usual American sizes, but there is no adjustable end here to cover anything else.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy not just use an adjustable wrench?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBecause it does not fit in the space and it does not go on over a supply line that is still attached. The slot in the ratcheting ring is exactly the thing an adjustable wrench does not have.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on chrome supply nuts without marking them?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eA ring on the flats is far kinder than pliers, which is the point. It is still steel on chrome plate, so if the nut is going back on show, go gently and expect faint marks on a nut that fights you.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat are the two black pads for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eP180 abrasive. After the old ferrule comes off, the copper stub-out is scored and oxidised where the ring sat. A few seconds with a pad cleans it so the new ferrule seats on a fresh surface.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes the ratchet reverse?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFlip the wrench over. These ratcheting rings work one way per face, so turning the tool upside down changes the direction — there is no lever to switch.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eThe nut will not move at all. Now what?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eStop before something gives. Penetrating oil and twenty minutes, then try again with the valve properly counter-held. If it still will not move, cutting the old stop off and pulling the ferrule is safer than twisting a pipe inside a wall.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs this enough to change a shut-off valve on its own?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWith the full kit, yes for the mechanical part — wrenches, puller, abrasive. You still need the new valve with its nut and ferrule, and something to catch the water.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Full kit (4 pieces)","offer_id":44900280598618,"sku":"NX-ANGLESTOP-KIT","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8cfd35865a3845ebafedd61e4e0cc2e3A.webp?v=1790235348"},{"product_id":"concealed-hinge-jig-35mm","title":"35 mm Concealed Hinge Jig — Aluminium Template for Cabinet Door Cup Holes and Mounting Plates","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCabinet doors\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe 35 mm cup hole in the right place, the first time and the twentieth.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA concealed hinge is unforgiving. The cup has to be 35 mm, a set distance in from the door edge, and square to it — and the mounting plate on the cabinet side has to line up with it. Measure and mark by hand and you will get away with it on one door; by the fourth you have a kitchen where nothing sits flush. This plate clamps to the work, and the holes are already in the right place.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it is a guide, not a drill.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe jig positions the holes. You still supply the drill, and for the cup you need a \u003cstrong style=\"color:#fff\"\u003e35 mm Forstner bit\u003c\/strong\u003e. That bit is included in the \u003cstrong style=\"color:#fff\"\u003e“jig + 35 mm bit”\u003c\/strong\u003e options and not in the “jig only” ones — take the plain jig if you already own one. Each of those comes as a \u003cstrong style=\"color:#fff\"\u003esingle or a 2-pack\u003c\/strong\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eIt is built around the standard European pattern: \u003cstrong style=\"color:#fff\"\u003e35 mm cup\u003c\/strong\u003e, \u003cstrong style=\"color:#fff\"\u003e48 mm\u003c\/strong\u003e between the cup screws, \u003cstrong style=\"color:#fff\"\u003e32 mm\u003c\/strong\u003e between the mounting-plate screws. That is what the overwhelming majority of cabinet hinges use — but hold your hinge against the drawing below before you order, because the odd brand does its own thing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Saa34aa9b5d6344d992ee9e3b206b4b29F.webp\" alt=\"The red jig with the 35 mm Forstner bit that comes in the jig-plus-bit option\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eBoth halves\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eDoor cup and cabinet plate\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e3, 4, 5 or 6 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eEdge distance, set by the screws\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eAluminium plate\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e80 × 85 mm, 12 mm thick\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eClamps on\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFence rail and two thumb screws\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S74ecbac41330487d8fdda7d5eb0b60961.webp\" alt=\"The hole pattern: a 35 mm cup with its two fixing screws 48 mm apart, and the mounting-plate screws on the 32 mm system\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eRead the plate\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eEvery number on it means something\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe bottom half is the \u003cstrong\u003edoor\u003c\/strong\u003e: the big semicircle is the \u003cstrong\u003e35 mm cup\u003c\/strong\u003e, the small hole at its centre is the pilot, and the two round holes either side are the hinge’s own fixing screws at \u003cstrong\u003e48 mm\u003c\/strong\u003e apart. Along the fence are the holes marked \u003cstrong\u003e3, 4, 5, 6\u003c\/strong\u003e — that is the distance in millimetres from the door edge to the edge of the cup, and you pick it by which pair the thumb screws go through.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe top half is the \u003cstrong\u003ecabinet\u003c\/strong\u003e: two rows of slots for the mounting-plate screws, \u003cstrong\u003e32 mm\u003c\/strong\u003e apart, which is the same 32 mm system the rest of your cabinet hardware is drilled to. The little 3-4-5-6 scales beside each slot set how far in from the edge those screws land.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sc361461f09f0489ca910e57d86897f1ac.webp\" alt=\"Setting the distance from the door edge to the cup hole: 3, 4, 5 or 6 mm\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe setting that matters\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eEdge distance decides whether the door shuts\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eMove the cup closer to the edge and the door swings wider but sits tighter to its neighbour; move it in and you gain clearance but lose opening angle. Most hinges are specified at \u003cstrong\u003e5 mm\u003c\/strong\u003e, some at 3 or 4, and thicker doors sometimes want 6. The hinge’s own instructions will say.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eWhatever you choose, the point of a jig is that \u003cstrong\u003eevery door gets the same number\u003c\/strong\u003e. Set it once for the job and every cup on every door lands identically — which is the difference between doors you adjust and doors that already line up.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8cb739d76fed40e693c892d12648b6b4Q.webp\" alt=\"The jig clamped on a door with the Forstner bit cutting the cup hole\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eDrilling it\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eSet the depth stop before the first hole\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eA hinge cup is normally \u003cstrong\u003e12–13 mm deep\u003c\/strong\u003e — check yours — and a 16 mm door leaves you very little behind it. The Forstner bit has a collar you can set, or clamp a stop on the drill; either way do it on a scrap first. Going through the face of a finished door is the one mistake this job does not forgive.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eDrill at a moderate speed, let the bit clear its chips, and keep the plate flat on the work. If you are drilling by hand rather than in a press, go slowly at the start so the centre spur bites before the rim does.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S814a415db19e45ccbf288fabfa0f1b7cc.webp\" alt=\"How the jig lines up with a concealed hinge and its mounting plate\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCheck your hinge\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eHold it against the plate before you buy\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eLay your hinge on the drawing: the cup should be 35 mm across, its two screws 48 mm apart, and the mounting plate’s screws 32 mm apart. If that is what you have — and it almost certainly is, on anything from a flat-pack kitchen to a cabinet shop — this jig is drilled for it.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eWhere it will not help: \u003cstrong\u003e26 mm cup\u003c\/strong\u003e mini hinges, hinges with a 45 mm screw spread instead of 48, and any surface-mounted or barrel hinge, which is a different job entirely.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhat it will not do\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt does not hold itself.\u003c\/strong\u003e Two thumb screws pull the plate against the fence rail and the work, which is enough for a steady hand, but it is not a quick-clamp jig. On a run of doors, a small F-clamp on the plate is worth the extra second.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt does not set the depth.\u003c\/strong\u003e Nothing here stops the bit going too deep — that is the drill’s job, or the bit’s collar. Test on scrap.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eOne cup size: 35 mm.\u003c\/strong\u003e The most common by a long way, but not the only one. If your hinges are 26 mm, this is the wrong plate.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe bit in the kit is a supplier bit, not a named brand.\u003c\/strong\u003e It does the job in MDF, chipboard and softwood. If you are boring hardwood all day, a good Forstner will cut cleaner and last longer — take the jig-only option and put the money there.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eNo published tolerance.\u003c\/strong\u003e The maker does not state a machining tolerance and we will not invent one. What we can say is what is cast into the plate and shown in the drawing above.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-hingejig-pack2-red-bit.jpg\" alt=\"Two red jigs and two 35 mm Forstner bits, the 2-pack\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSingle or 2-pack\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003ePick the kit, the colour, then how many\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eJig only\u003c\/strong\u003e — the aluminium plate, its fence rail and two thumb screws. Take this if there is already a 35 mm Forstner in your box.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eJig + 35 mm bit\u003c\/strong\u003e — the same jig with a 35 mm Forstner (78 mm long, round shank) so you can start on the day it arrives.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eRed or silver\u003c\/strong\u003e changes nothing but the anodising. Red is easier to find on a bench covered in offcuts; silver looks less like a toy if that matters to you.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eEvery combination also comes as a \u003cstrong\u003e2-pack\u003c\/strong\u003e, and the reason is not “buy more”: on a run of doors, \u003cstrong\u003eleaving two jigs set up saves the setting\u003c\/strong\u003e. Put one on the 5 mm holes for the doors and one on the cabinet rows, and you stop re-adjusting between every pair. Two hands, two jigs, no thinking.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003ePlate\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAluminium alloy, 80 × 85 mm (3.15 × 3.35 in), 12 mm (0.47 in) thick\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eCup\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e35 mm, with a centre pilot and the hinge’s two fixing screws at 48 mm\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eMounting plate\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSlotted holes on the 32 mm system, two rows\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eEdge distance\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e3, 4, 5 or 6 mm, set by which holes the thumb screws pass through\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eForstner bit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e35 mm cutting diameter, 78 mm (3.07 in) long — in the “jig + bit” options only\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eClamping\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFence rail plus two thumb screws\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eColours\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRed or silver — identical plate\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eQuantity\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSingle, or a 2-pack of the same colour and kit\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe drill, a depth stop, the hinges and their screws\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe alloy grade, the machining tolerance and the bit’s steel — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my hinges?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMeasure three things: the cup should be 35 mm across, its two screws 48 mm apart, and the mounting plate’s screws 32 mm apart. That is the standard European pattern and what this plate is drilled for. A 26 mm cup or a 45 mm screw spread will not line up.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo I need the bit?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYou need \u003cem\u003ea\u003c\/em\u003e 35 mm Forstner. If you already own one, take the jig-only option and save the difference. If not, the bundled bit gets you going.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow deep should the cup be?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eUsually 12–13 mm, but check the hinge you are fitting — and check the door thickness. On a 16 mm door there is not much left behind the cup, so set a depth stop and test on an offcut.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich edge distance do I pick?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWhatever the hinge specifies — 5 mm is the most common. Closer to the edge means a wider swing and less gap; further in means more clearance and a narrower swing. The important part is using the same number on every door.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it for the cabinet side as well?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes — that is the top half of the plate. The two rows of slots put the mounting-plate screws on the 32 mm system so the plate lines up with the cup you just drilled.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it work on a drill press?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, and that is the best way to use it — the jig locates the hole and the press keeps it square and to depth. It works handheld too, which is the point of the fence.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eRed or silver?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eSame plate, same holes. Only the anodised colour differs.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the 2-pack worth it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIf you are hanging more than a few doors, yes — and not mainly for the price. Two jigs means one stays set for the door cups and one for the cabinet rows, so you are not re-setting the edge distance every time you change ends. For a single door or a repair, one is plenty.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it mark a finished door?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe thumb screws bear on the plate, not the door face, but a jig clamped to a lacquered surface can still leave a mark. Put a strip of masking tape under it on anything already finished.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Jig only — red","offer_id":44901134008410,"sku":"NX-HINGEJIG-R","price":27.95,"currency_code":"USD","in_stock":true},{"title":"Jig only — silver","offer_id":44901134073946,"sku":"NX-HINGEJIG-S","price":27.95,"currency_code":"USD","in_stock":true},{"title":"Jig + 35 mm bit — red","offer_id":44901134041178,"sku":"NX-HINGEJIG-BR","price":40.95,"currency_code":"USD","in_stock":true},{"title":"Jig + 35 mm bit — silver","offer_id":44901134106714,"sku":"NX-HINGEJIG-BS","price":40.95,"currency_code":"USD","in_stock":true},{"title":"2× jig only — red","offer_id":45550804533338,"sku":"NX-HINGEJIG-2R","price":49.95,"currency_code":"USD","in_stock":true},{"title":"2× jig only — silver","offer_id":45550804566106,"sku":"NX-HINGEJIG-2S","price":49.95,"currency_code":"USD","in_stock":true},{"title":"2× jig + 35 mm bit — red","offer_id":45550804598874,"sku":"NX-HINGEJIG-2BR","price":69.95,"currency_code":"USD","in_stock":true},{"title":"2× jig + 35 mm bit — silver","offer_id":45550804631642,"sku":"NX-HINGEJIG-2BS","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Saa34aa9b5d6344d992ee9e3b206b4b29F.webp?v=1790242283"},{"product_id":"55-in-1-screwdriver-cube","title":"55-in-1 Precision Screwdriver Cube — 36 Bits, Mini Wrenches and Pry Tools in a Fold-Out Case","description":"\u003cdiv style=\"max-width: 1080px; margin: 0 auto; color: #1e2532; line-height: 1.7;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003ePrecision repair, sorted\u003c\/p\u003e\n\u003ch2 style=\"font-size: 34px; line-height: 1.25; font-weight: 600; margin: 0 0 16px;\"\u003eEvery tiny screw in the house, and the bit for it is in one small cube.\u003c\/h2\u003e\n\u003cp style=\"font-size: 17px; max-width: 780px; margin: 0 0 26px;\"\u003eA laptop back, a game controller, the hinge on your glasses, a loose cabinet handle. Each one takes a different little bit, and they're never all in the same drawer. This cube holds \u003cstrong\u003e36 precision bits, six mini wrenches and eleven pry tools\u003c\/strong\u003e. It unfolds into a row of trays sorted by job, so you open it and go straight to the right section.\u003c\/p\u003e\n\u003cp style=\"font-size: 17px; max-width: 780px; margin: 0 0 26px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/75b218e4-2a66-4ad1-929e-c1cfd0b44e78.jpg?v=1790332511\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 14px; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 200px; background: #F4F5F6; border-radius: 12px; padding: 18px 20px;\"\u003e\n\u003cp style=\"margin: 0 0 4px; font-weight: 600;\"\u003e36 precision bits\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 14px; color: #5a6472;\"\u003ePhillips, Torx, tri-point, pentalobe, gamebit and more\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 200px; background: #F4F5F6; border-radius: 12px; padding: 18px 20px;\"\u003e\n\u003cp style=\"margin: 0 0 4px; font-weight: 600;\"\u003e6 mini wrenches\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 14px; color: #5a6472;\"\u003eOpen-end, 4 to 7 mm\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 200px; background: #F4F5F6; border-radius: 12px; padding: 18px 20px;\"\u003e\n\u003cp style=\"margin: 0 0 4px; font-weight: 600;\"\u003e11 pry tools\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 14px; color: #5a6472;\"\u003e5 metal tips for the handle, 6 plastic picks\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 200px; background: #F4F5F6; border-radius: 12px; padding: 18px 20px;\"\u003e\n\u003cp style=\"margin: 0 0 4px; font-weight: 600;\"\u003eAbout 3 in folded\u003c\/p\u003e\n\u003cp style=\"margin: 0; font-size: 14px; color: #5a6472;\"\u003eFits a drawer, a glovebox or a backpack pocket\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 36px; align-items: center; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/4bf20a1b-c145-4bdc-a723-5820538c4d36.jpg?v=1790332606\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eHow it opens\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 14px;\"\u003eA cube that folds out into a row of trays\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003eClosed, it's a cube about 3.15 in (8 cm) on each side. Open it and the panels fold out flat into a strip of trays, each one labeled by job: home repairs, game consoles, home appliances, phones and tablets, optics, wrenches and pry tools.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eEvery piece clicks into its own slot, so nothing rattles loose in the case and you can see at a glance if one is missing. Folding it back up is part of the fun. The maker even lists “fidget experience” as a feature.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 36px; align-items: center; flex-direction: row-reverse; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/679ad2f8-c32c-4aed-a892-cb6908208ff3.jpg?v=1790332680\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eThe bits\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 14px;\"\u003eSorted by what you're fixing, not by shape\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003eInstead of 36 bits in one long row, the trays group them by the job. The game console tray has the gamebits and the Y (tri-point) bits, the phone tray has the pentalobes and small Torx, and the optics tray has the tiniest Phillips and hex bits for glasses and cameras.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe full list, as the maker labels each bit, is in the table further down.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 36px; align-items: center; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1ee4c6cf42d84775b688a80c865b81d2Z.webp\" alt=\"Special bits and the magnetic handle with its 360-degree swivel cap\" style=\"width: 100%; border-radius: 14px; display: block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eThe handle\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 14px;\"\u003eStraight for precision, bent into an L for leverage\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003eThe 2-in-1 handle works as a normal precision driver, or turns into an L shape when a stubborn screw needs more turning force. The cap on the end swivels, so you can hold it still with a fingertip and spin the body for fast, light screws.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe bit socket is magnetic, so small screws stay on the tip instead of dropping into the device. Two special bits are worth a look: a 3-in-1 hex bit (H4, H5 and H6 in one) and a pair of forked \"IN\" bits, IN Y2 and IN PH2.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 36px; align-items: center; flex-direction: row-reverse; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S1b396a390dd443edbe591f17546d8e35t.webp\" alt=\"The five metal pry tools: curved pry bar, scraping blade, angled scraper, pointed pry and pin adjuster\" style=\"width: 100%; border-radius: 14px; display: block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eGetting things open\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 14px;\"\u003eFive metal pry tips and six plastic picks\u003c\/h2\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003eThe five metal pry tools fit the same handle as the bits. There's a curved pry bar, a scraping blade for tape and soft adhesive, an angled scraper for grime and old solder, a pointed pry for tight gaps, and a forked pin adjuster.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe six soft plastic picks go first on anything with a finish you care about, like phone backs, laptop bezels and console shells. Plastic won't gouge the plastic, and it's safer near a battery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 36px; align-items: center; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S78dcbb9396394094bfc001b62236c310O.webp\" alt=\"Used on a laptop, a cabinet hinge, eyeglasses and small household screws\" style=\"width: 100%; border-radius: 14px; display: block;\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 340px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eWhere it earns its place\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 14px;\"\u003eThe small jobs a big screwdriver can't do\u003c\/h2\u003e\n\u003cp style=\"margin: 0;\"\u003eSwapping a laptop SSD, cleaning a console fan, tightening the arms on your glasses, a battery cover on a toy, a hinge screw inside a cabinet. It's a precision kit, so it's made for small screws and gentle force. For decking or furniture bolts, reach for a full-size driver.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eTwo finishes\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 8px;\"\u003eBlack or carbon pattern\u003c\/h2\u003e\n\u003cp style=\"max-width: 780px; margin: 0 0 22px;\"\u003eThe tools inside are the same. Only the outside of the cube changes.\u003c\/p\u003e\n\u003cp style=\"max-width: 780px; margin: 0 0 22px;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/4c48915b-0930-4e9c-9cd2-3c5fee5a2360.jpg?v=1790332767\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 30px; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"flex: 1 1 300px;\"\u003e\n\u003ch3 style=\"font-size: 19px; font-weight: 600; margin: 0 0 6px;\"\u003eBlack\u003c\/h3\u003e\n\u003cp style=\"margin: 0; color: #4a5058;\"\u003eA plain matte black cube. Quiet on a desk and hides scuffs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 300px;\"\u003e\n\u003ch3 style=\"font-size: 19px; font-weight: 600; margin: 0 0 6px;\"\u003eCarbon Pattern\u003c\/h3\u003e\n\u003cp style=\"margin: 0; color: #4a5058;\"\u003eA woven carbon-fiber look on the outside of the cube. It's a printed pattern on the case, not a carbon-fiber shell.\u003c\/p\u003e\n\u003cp style=\"margin: 0; color: #4a5058;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/0653e32d-b99b-405c-876c-d746679cba79.jpg?v=1790332848\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 16px;\"\u003eFour things we'd rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background: #F4F5F6; border-radius: 14px; padding: 26px 28px; margin: 0 0 52px;\"\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003e\u003cstrong\u003eThese are precision bits, not drill bits.\u003c\/strong\u003e They fit the included handle. The maker calls it an H4 handle, and H4 is the small hex used by precision bits, so they won't fit a drill's 1\/4 in chuck.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003e\u003cstrong\u003eNot for live electrical work.\u003c\/strong\u003e The handle and tools aren't insulated. Unplug the device, and take the battery out where you can, before you open it.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 14px;\"\u003e\u003cstrong\u003eTwo different sizes are quoted.\u003c\/strong\u003e The maker's drawing gives the cube as 8 cm (3.15 in) on each side, while one of their icons says 3.5 in. We go with the drawing.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eThe cube carries the maker's logo.\u003c\/strong\u003e VMAN is printed on the case, as you can see in the photos.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 16px;\"\u003eWhat's in the cube\u003c\/h2\u003e\n\u003cdiv style=\"border-top: 1px solid #E3E6EA; margin: 0 0 52px;\"\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eHome repairs\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003eH4\/H5\/H6 3-in-1 hex, valve core, IN Y2, IN PH2, M4.0, M4.5, M5.0, M5.5\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eGame consoles\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003ePH00, PH0, PH1, Y0, Y00, G3.8, G4.5, T8H\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eHome appliances\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003ePH00, PH1, PH2, SL4.0, Y2, T10H, T15H, U4, triangle 2.3, H3\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003ePhones \u0026amp; tablets\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003eAP2, AP5, Y000, T2, IP4\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eOptics \u0026amp; lab\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003ePH000, PH00, H1.5, H2.0, SL1.0\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eOpen-end wrenches\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003e4, 4.5, 5, 5.5, 6 and 7 mm\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eMetal pry tools\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003eCurved pry bar, scraping blade, angled scraper, pointed pry, pin adjuster (fit the handle)\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003ePlastic picks\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003e6 soft triangle picks\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eHandle\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003e2-in-1, straight or L-shape, magnetic bit socket, swivel cap\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eBit steel\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003eS2 alloy steel, as listed by the maker\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display: flex; flex-wrap: wrap; gap: 6px 20px; border-bottom: 1px solid #E3E6EA; padding: 12px 0;\"\u003e\n\u003cdiv style=\"flex: 0 0 170px; color: #5a6472;\"\u003eCase\u003c\/div\u003e\n\u003cdiv style=\"flex: 1 1 240px;\"\u003ePlastic fold-out cube, about 3.15 in (8 cm) on each side, black or carbon pattern\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size: 28px; line-height: 1.3; font-weight: 600; margin: 0 0 8px;\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin: 0 0 44px;\"\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eWill it open my phone, laptop or game console?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eIt has the bit types those devices usually use: pentalobe and Y (tri-point) bits for phones, small Torx for laptops, and gamebits and Y bits for consoles and controllers. Check the screw on your own device against the list above before you start.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eCan I use the bits in my drill or another driver?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eNot in a drill. They're small-hex precision bits, not 1\/4 in. They'll usually fit other precision drivers that take the same small hex, but they're meant for the handle in the kit.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eWhat's the difference between the two finishes?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eOnly the outside of the cube. Black is plain matte black, and Carbon Pattern has a printed carbon-fiber look. The tools inside are identical.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eIs the handle magnetic?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eYes. The bit socket is magnetic, so small screws cling to the tip while you line them up.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eWhat are the security bits for?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eBits like T8H, T10H and T15H have a hole in the middle for screws with a center pin, which are common on appliances and consoles. They're for repairing things you own.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-bottom: 1px solid #E3E6EA; padding: 14px 0;\"\u003e\n\u003csummary style=\"cursor: pointer; font-weight: 600; font-size: 16px;\"\u003eIs it a good gift?\u003c\/summary\u003e\n\u003cp style=\"margin: 12px 0 0;\"\u003eIt's a neat one for anyone who fixes their own gadgets. It looks tidy on a desk, and unfolding it is half the fun.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #F4F5F6; border-radius: 14px; padding: 30px 28px; margin: 0 0 24px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 10px;\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order. That window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color: #e5622a;\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color: #e5622a;\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center; padding: 26px 0 6px;\"\u003e\n\u003cp style=\"color: #e5622a; font-size: 12px; letter-spacing: .18em; text-transform: uppercase; font-weight: bold; margin: 0 0 8px;\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin: 0; max-width: 620px; display: inline-block; font-size: 15px; color: #5a6472;\"\u003eTools for repair, maintenance and the jobs in between, chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"Black","offer_id":45556482310234,"sku":"NX-BITCUBE-BK","price":54.95,"currency_code":"USD","in_stock":false},{"title":"Carbon Pattern","offer_id":45556482277466,"sku":"NX-BITCUBE-CF","price":59.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/75b218e4-2a66-4ad1-929e-c1cfd0b44e78.jpg?v=1790332511"},{"product_id":"deep-hole-marker-set","title":"Deep Hole Marker Set — 20 mm Long Nib, Oil-Based Ink, 5 Colors","description":"\u003ch1\u003eSPECIFICATIONS\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eAutomobile Manufacturing\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eother production Industries\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrand Name\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eNONE\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrush Tip\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eRound Toe,Round Toe\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoice\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eyes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDual-side Writing\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eNo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEffect\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eFurniture Decoration, Book Shelf\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eWater resistant and Fast Drying\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-concerned chemical\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003enone\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInk Color\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eblack\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInk Colors\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003ewhite Red Blue Black Green\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInk Type\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003ePermanent\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModel Number\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eko666-88\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOrigin\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eMainland China\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePackage Quantity\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003e4-100pcs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSuitable for\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eLamp Drill Hole Position for Mark\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eType\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eOil,Marker Pen,Marker Pen\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWriting Medium\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003ePaper\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWriting Point\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003e20mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"detailmodule_html\"\u003e\n\u003cdiv class=\"detail-desc-decorate-richtext\"\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S6453971d422b433bb34c4e41c17dbb51X.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S3d249e8351ba4c8f82e8e9ce3dd09dd1F.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/Sd42a36aec71c47af9261d00ce159a11bN.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S1afe0807599c40d6a69b6b0d3f071147M.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S0fb6d3aa75b34c41bb9508daec32415am.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/Sc9040bb54bcd40d389221fc3b36f69f0j.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/Sd9ec53113b5d4e0ba7e593ec9785fdc35.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S1596131abef344199741dfbe41a4afc2j.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S7169531c153e4f9d90dc8e161ff80166k.jpg\"\u003e\u003cimg src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/Sf51572b44b7e487d9106c146c7abf944R.jpg\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"10 Pens","offer_id":67589812944986,"sku":"NX-DEEPMARK-10","price":17.95,"currency_code":"USD","in_stock":true},{"title":"20 Pens","offer_id":67589812682842,"sku":"NX-DEEPMARK-20","price":25.95,"currency_code":"USD","in_stock":true},{"title":"50 Pens","offer_id":67589812060250,"sku":"NX-DEEPMARK-50","price":47.95,"currency_code":"USD","in_stock":true},{"title":"100 Pens","offer_id":67589811798106,"sku":"NX-DEEPMARK-100","price":85.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Se32cfebf2533483fb95ad452cfc85362i.webp?v=1790758265"},{"product_id":"cut-resistant-gloves","title":"Cut-Resistant Gloves — HPPE Knit, EN 388 Cut 5, Sizes S–XXL","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCut-resistant gloves\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eA layer of tough knit between the edge and your fingers.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eA mandoline, a carving knife, a utility blade, the edge of a sheet of metal or a pane of glass: the cuts that hurt are the ones where a sharp edge slides across your hand. The maker lists the yarn as \u003cstrong\u003eHPPE\u003c\/strong\u003e, a high-strength polyethylene used in cut-resistant gloves, rates them \u003cstrong\u003ecut level 5 under EN 388\u003c\/strong\u003e and prints that on the cuff tag.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sef7d287598f84d67a68489841e003eabc.webp\" alt=\"Gray HPPE cut-resistant gloves stacked to show the cut level 5 cuff tag, beside a gloved hand holding a knife blade\" style=\"width:100%;max-width:640px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 30px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eHPPE knit\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThin enough to feel what you're holding\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eCut level 5\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe maker's EN 388 rating, on the tag\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eMachine washable\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003ePer the maker's listing\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSizes S to XXL\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eOne pair per order\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: cut-resistant is not cut-proof.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe knit slows a smooth blade that slides across it. \u003cstrong style=\"color:#fff\"\u003eDon't count on it against a point.\u003c\/strong\u003e A knife tip, a needle, a nail, a glass splinter or a fish hook can push through the gaps between the yarns, and a serrated knife or a saw can tear it.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eIt is no protection around power tools either.\u003c\/strong\u003e Never wear knit gloves near a spinning blade, bit, belt or lathe: a knit glove snags easily and can pull your hand in.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-cut-resistant-gloves-knife.jpg\" alt=\"Gloved hand holding a chef's knife by the blade in the maker's staged photo\" style=\"width:100%;max-width:520px;border-radius:14px;display:block;margin:0 auto\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat the rating means\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eLevel 5 on the tag, and where that number comes from\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eEN 388 is the European standard for gloves that protect against mechanical risks. A full EN 388 marking prints four to six scores under its shield symbol, and the 2016 edition adds an A-to-F cut grade. This tag shows the shield and the words “cut level 5” and nothing more, so we can't tell which test the 5 comes from. The likeliest reading is the blade test scored 1 to 5, which would put it at the top of that scale.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe maker has not sent us the test report, and the gloves carry no ANSI\/ISEA 105 cut level (the A1 to A9 scale used in the US), so read it as the maker's rating, not a match for a US-rated glove.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe maker's photos show a gloved hand holding a knife by its blade. That's a staged photo, not a cut test, and not a way to handle knives.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe glove itself\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eA thin knit with a stretch cuff\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 14px\"\u003eEach glove is knitted from gray HPPE yarn, with a darker hem at the cuff and a sewn-in tag carrying the rating. The knit stretches to your hand, so it sits close around the fingers instead of bunching, and the maker says it leaves enough dexterity for precise work.\u003c\/p\u003e\n\u003cp style=\"max-width:780px;margin:0 0 52px\"\u003eIt breathes, which you'll notice on a long prep shift. That is also why water and juices go straight through it: the knit is not waterproof, and it has no grip coating.\u003c\/p\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhere they help\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eSlicing jobs, where the edge moves across your hand\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eWear one on the hand that holds the work, or a pair when both hands are near an edge.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:12px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eIn the kitchen\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eMandolines and graters, peeling, carving and filleting with a smooth blade. Keep using the mandoline's hand guard; the glove is a second layer, not a replacement.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:12px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eAt the bench\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eWhittling and wood carving, utility-knife work, cutting carpet, foam or drywall. Knives and blades only: no saws, hand or powered, and nothing that spins.\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 220px;background:#F4F5F6;border-radius:12px;padding:20px 22px\"\u003e\n\u003cp style=\"margin:0 0 6px;font-weight:600\"\u003eAround sharp edges\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:15px;color:#4A5058\"\u003eSheet metal and ductwork, glass, tile and trim with a fresh cut edge. The knit has no grip coating, so it can slip on smooth glass or oily metal, and splinters and shards with a point can still get through.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSizes\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eMeasure your palm, then pick a size\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eThe maker gives two sets of figures: a size chart (A and B in the picture) and a glove length in the listing. They don't line up exactly, so we print both. The chart is drawn on a glove and doesn't say whether A and B mean your hand or the glove laid flat; A matches the listing's glove lengths, so we read both as the glove.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sdd29ab0044024a8f892a138f6859863cf.webp\" alt=\"Maker's size guide: length A and palm width B for sizes S to XL\" style=\"width:100%;max-width:560px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\u003cdiv style=\"overflow-x:auto;margin:0 0 12px\"\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:14px\"\u003e\n  \u003cthead\u003e\n    \u003ctr style=\"background:#1E2532;color:#fff\"\u003e\n      \u003cth style=\"text-align:left;padding:10px 12px;font-weight:600\"\u003eSize\u003c\/th\u003e\n      \u003cth style=\"text-align:left;padding:10px 12px;font-weight:600\"\u003eB: palm width (glove)\u003c\/th\u003e\n      \u003cth style=\"text-align:left;padding:10px 12px;font-weight:600\"\u003eA: cuff to fingertip (glove)\u003c\/th\u003e\n      \u003cth style=\"text-align:left;padding:10px 12px;font-weight:600\"\u003eGlove length (listing)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 12px;font-weight:600\"\u003eS\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e3–3.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e8–8.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e20 cm \/ 7.9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"border-bottom:1px solid #E3E6EA;background:#F4F5F6\"\u003e\n\u003ctd style=\"padding:10px 12px;font-weight:600\"\u003eM\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e3.5–4 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e8.5–9 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e22 cm \/ 8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 12px;font-weight:600\"\u003eL\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e4–4.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e9–9.5 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e24 cm \/ 9.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"border-bottom:1px solid #E3E6EA;background:#F4F5F6\"\u003e\n\u003ctd style=\"padding:10px 12px;font-weight:600\"\u003eXL\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e4.5–5 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e9.5–10 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e26 cm \/ 10.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr style=\"border-bottom:1px solid #E3E6EA\"\u003e\n\u003ctd style=\"padding:10px 12px;font-weight:600\"\u003eXXL\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003enot given\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003enot given\u003c\/td\u003e\n\u003ctd style=\"padding:10px 12px\"\u003e28 cm \/ 11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size:14px;color:#5A6472;max-width:780px;margin:0 0 52px\"\u003eTo choose, lay a knit glove that fits you flat and measure across the palm just below the fingers, then match it to B. Between two sizes, take the smaller: the knit stretches, and loose fingertips are more likely to catch on a blade. The maker's chart stops at XL; for XXL the listing gives only the glove length.\u003c\/p\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:24px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 300px;background:#F4F5F6;border-radius:14px;padding:24px 26px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCare\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe maker's listing says machine washable and nothing more. We'd wash them warm, skip the bleach and let them air dry. Rinse off food and grit after each use, and wash them properly after raw meat, fish or poultry, because anything left in the knit will still be there next time. Check them before each use and replace the pair once you find a hole, a thin patch or a cut in the knit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 300px;background:#F4F5F6;border-radius:14px;padding:24px 26px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWith food\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe maker calls them food safe; we haven't seen a food-contact certificate. For food that won't be cooked afterward, like salad vegetables on a mandoline, the FDA Food Code has restaurants cover a knit cut glove with a single-use glove. It's a good habit at home too, and over raw meat and fish it keeps juices out of the knit.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eFive things we'd rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt resists cuts; it doesn't make you cut-proof.\u003c\/strong\u003e A serrated knife, a saw or a hard, sawing stroke can still get through, and a blade that doesn't cut can still bruise.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eDon't count on it against points.\u003c\/strong\u003e The maker's listing mentions puncture resistance, but the tag shows no puncture score, and a knife tip, needle, nail, hook or splinter can push between the yarns of a knit. If puncture is the risk, you need a glove rated for it.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNot for power tools.\u003c\/strong\u003e Don't wear these near spinning blades, bits or belts: a knit glove snags easily, a caught glove pulls the hand in, and no cut rating stops a powered blade.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNot for heat.\u003c\/strong\u003e The yarn softens at temperatures a hot pan or an oven rack easily reaches, so don't use them as an oven mitt or near a flame.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eLevel 5 is the maker's rating.\u003c\/strong\u003e We have not seen the EN 388 test report, and there is no ANSI\/ISEA 105 rating, so we can't compare it with US-rated gloves.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and figures\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003eHPPE knit (high-performance polyethylene). The maker lists HPPE only and publishes no fiber blend\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eCut rating\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003e“Cut level 5” with the EN 388 shield on the cuff tag, the maker's rating. No full EN 388 code, no A–F cut grade, no ANSI\/ISEA 105 rating\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eNot rated for\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003ePuncture, heat, chemicals or electrical work. The maker's listing mentions puncture resistance but publishes no score for it or the others\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eSizes\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003eS, M, L, XL, XXL (see the size table)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eColor\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003eGray, with a darker hem at the cuff\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eWeight\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003eAbout 80 g \/ 2.8 oz per pair (the listed shipping weight)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eCare\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003eMachine washable, per the maker's listing\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;flex-wrap:wrap;gap:6px 20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the package\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 240px\"\u003e1 pair (2 gloves) in the size you choose\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs it one glove or a pair?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eA pair: two gloves in the size you pick.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich size should I order?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eLay a knit glove that fits you flat, measure across the palm just below the fingers and match it to B in the size table. The maker's chart doesn't say whether B is a hand or a glove measurement, so use it as a guide. Between two sizes, take the smaller: the knit stretches, and loose fingertips are more likely to catch on a blade.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use them with a mandoline?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, that's one of the jobs they suit best, because the blade slices across the glove rather than stabbing into it. Keep using the mandoline's hand guard as well, and get a close fit, since a loose fingertip can catch on the blade.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eAre they good for shucking oysters?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThey help against the shell's sharp edges and a knife that slides across your hand, but they won't reliably stop the tip if it slips and drives into your palm, which is the usual shucking injury. Hold the oyster in a folded towel as well, or use a glove rated for puncture.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I wear them with a power tool?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. Around anything that spins (saws, drills, grinders, lathes) a knit glove can snag and pull your hand in, and it won't stop a powered blade. These are for knives, blades and sharp edges.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo they keep water out?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The knit breathes, so water, oil and juices go straight through. For wet work, wear a thin waterproof glove over or under them.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow do I clean them?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker says only that they're machine washable. We'd wash them warm, skip the bleach and let them air dry.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order. That window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eRepair, hand and utility tools, chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"S","offer_id":67594628759642,"sku":"NX-CUTGLOVE-S","price":25.95,"currency_code":"USD","in_stock":true},{"title":"M","offer_id":67594628825178,"sku":"NX-CUTGLOVE-M","price":25.95,"currency_code":"USD","in_stock":true},{"title":"L","offer_id":67594628792410,"sku":"NX-CUTGLOVE-L","price":25.95,"currency_code":"USD","in_stock":true},{"title":"XL","offer_id":67594628890714,"sku":"NX-CUTGLOVE-XL","price":25.95,"currency_code":"USD","in_stock":true},{"title":"XXL","offer_id":67594628857946,"sku":"NX-CUTGLOVE-XXL","price":25.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sef7d287598f84d67a68489841e003eabc.webp?v=1790843591"},{"product_id":"metal-hole-cutter-set-16-30mm","title":"Metal Hole Cutter Set — Five Sizes From 16 to 30 mm, Pilot and Arbor Already Fitted","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eHoles a twist bit cannot make\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eA twist bit makes a 10 mm hole. These make the ones you actually need.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eEvery cable gland, every panel grommet, every lock barrel and every conduit entry wants a round hole somewhere between 16 and 30 mm. Twist bits do not go there, and a step drill walks on thin steel. A toothed cutter with a pilot bit through the middle does: the pilot finds the centre punch and holds it, and the ring of teeth takes out the rest.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: the maker publishes no hardness, no speed and no thickness limit.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eFor a metal cutter those are the three numbers that matter, and \u003cstrong style=\"color:#fff\"\u003ethis maker gives none of them\u003c\/strong\u003e. No HRC hardness, no recommended RPM per size, and no maximum material thickness. We are not going to invent them. Its own spec sheet says one thing about the steel — \u003cstrong style=\"color:#fff\"\u003e“High Speed Steel”\u003c\/strong\u003e — and no grade behind it, so treat these as uncoated HSS: \u003cstrong style=\"color:#fff\"\u003enot bi-metal, not cobalt, not carbide\u003c\/strong\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eOn the 68 mm figure.\u003c\/strong\u003e That is the \u003cstrong style=\"color:#fff\"\u003eoverall length\u003c\/strong\u003e of the assembled cutter, pilot bit and shank. It is \u003cstrong style=\"color:#fff\"\u003enot\u003c\/strong\u003e cutting depth. The maker does not publish cutting depth, so do not plan a deep cut around it.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWhat that makes them good for.\u003c\/strong\u003e Sheet and plate you can get a pilot through, aluminium, plastic, plywood and board. Slow speed, steady pressure, and cutting fluid on steel. They are workshop cutters, not a replacement for a mag drill on structural steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S592f6b28e60047a782b7cff79c2a935d0_545fed5c-0084-453c-a1e2-fb60a5dfd7e0.webp\" alt=\"The five hole cutters with a hex key, and a cut hole in sheet metal\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e16 – 30 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eFive sizes: 16, 18.5, 20, 25 and 30 mm\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003ePilot and arbor on each\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eNot a set of cups waiting for a mandrel\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eEjector spring\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003ePushes the slug out instead of trapping it\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eOr take both\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eUncoated and coated together — ten cutters\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat you get\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 24px\"\u003eFive sizes, and every one of them is a complete cutter\u003c\/h2\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:26px;align-items:center;margin:0 0 40px\"\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S4f448b221636456db44bb18ae8236ccfm_c53bdc90-e7a8-4c32-b997-57a61c384734.webp\" alt=\"Sizes: 30, 25, 20, 18.5 and 16 mm, every one 68 mm long overall\" style=\"width:100%;border-radius:14px;display:block\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:0 0 10px\"\u003eSixteen, eighteen and a half, twenty, twenty-five, thirty\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 10px\"\u003eThe five diameters that cover nearly every round hole in a panel: cable glands, grommets, switch bodies, conduit entries, lock barrels.\u003c\/p\u003e\n\u003cp style=\"margin:0\"\u003eAll five are the same overall length, 68 mm assembled, so swapping sizes does not change how far the cutter stands out of the chuck.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:26px;align-items:center;margin:0 0 40px\"\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:0 0 10px\"\u003eEach one arrives complete, not as a cup\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 10px\"\u003eCutter blade, arbor, centre pilot drill, ejector spring, grub screw and its own hex key. The pilot finds your centre punch and holds the cutter there while the teeth start; the spring pushes the slug back out when you are through.\u003c\/p\u003e\n\u003cp style=\"margin:0\"\u003eFive assemblies, five hex keys — so there is always one in the drawer when the grub screw needs a nip.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Saae3fc143aef429c8ef461fb15af85a4a.webp\" alt=\"What one cutter is made of: blade, ejector spring, pilot drill, arbor, grub screw and hex key\" style=\"width:100%;border-radius:14px;display:block\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:26px;align-items:center;margin:0 0 40px\"\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S250af9a7ceb84c64a3d80760348ccdc03.webp\" alt=\"The titanium-coated set: five cutters and five hex keys\" style=\"width:100%;border-radius:14px;display:block\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 320px\"\u003e\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:0 0 10px\"\u003eUncoated, coated, or one set of each\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 10px\"\u003eSame five sizes either way, same accessories, same hex keys. The gold set carries a titanium coating; the silver one is bare high-speed steel.\u003c\/p\u003e\n\u003cp style=\"margin:0\"\u003eThe maker puts no number on how much the coating buys you, so neither do we. The honest rule of thumb: coated if you cut steel often, uncoated if it is mostly aluminium, plastic and board.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMaterials\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eWhat it cuts\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 20px;color:#5A6472;max-width:800px\"\u003eThe maker names steel, stainless, aluminium, plastic and wood. Here is the same list with the part it leaves out — how thin, and what to do differently.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 20px\"\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eSteel sheet\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe job it is built for — panels, boxes, trunking\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eStainless\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eSlow, firm pressure and cutting fluid, or it work-hardens\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eAluminium, copper, brass\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eSofter than steel; keep the chips clear\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eTube and pipe\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eClamp it — a round section spins the moment it bites\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003ePVC and plastic\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eLet the teeth cut; pushing melts the edge\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003ePlywood and board\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eClean on the top face, backing board under the exit\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp style=\"margin:0 0 44px;max-width:800px\"\u003e\u003cstrong\u003eWhat it will not cut.\u003c\/strong\u003e Hardened or case-hardened steel, spring steel, anything heat-treated — a plain HSS tooth is not harder than those and will round off on the first hole. Nor masonry, tile or glass. And nothing thick: this is a shallow cup with a pilot, not a mag-drill cutter, and the maker publishes no thickness limit for it.\u003c\/p\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eSpecification\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eStraight answers\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 20px;color:#5A6472;max-width:800px\"\u003eEvery figure here is the maker’s own. Where it publishes nothing, we say so instead of filling the gap.\u003c\/p\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSizes\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eFive cutters: \u003cstrong\u003e16 mm (0.62 in), 18.5 mm (0.72 in), 20 mm (0.78 in), 25 mm (0.98 in) and 30 mm (1.18 in)\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eOverall length\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003e68 mm (2.67 in)\u003c\/strong\u003e for every size, assembled. This is length, \u003cstrong\u003enot\u003c\/strong\u003e cutting depth — the maker does not publish cutting depth\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSteel\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eHigh-speed steel.\u003c\/strong\u003e The maker gives no grade, so we quote none. Not bi-metal, not cobalt, not carbide\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eFinish\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eTwo finishes, three ways to buy:\u003c\/strong\u003e uncoated HSS (silver), titanium-coated (gold), or one set of each. The maker publishes no figure for how much longer the coating lasts, so we do not claim one\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eWhat one cutter is\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCutter blade, \u003cstrong\u003earbor\u003c\/strong\u003e, \u003cstrong\u003ecentre pilot drill\u003c\/strong\u003e, \u003cstrong\u003eejector spring\u003c\/strong\u003e, grub screw and \u003cstrong\u003ehex key\u003c\/strong\u003e. Five complete assemblies, five hex keys\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eIf you take both\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eTwo complete sets — ten cutters, ten pilot drills, ten arbors and ten hex keys. The supplier does not sell it as a bundle, so it is both sets ordered together and may arrive as two parcels\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eShank\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRound shank with a flat, held by the grub screw. Fits a standard three-jaw chuck\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eMaterials\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe maker names \u003cstrong\u003esteel, stainless, aluminium, plastic and wood\u003c\/strong\u003e. Copper and brass are softer than those steels, so they cut the same way. Tube and pipe work too, as long as you can clamp it\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eHardness (HRC), recommended RPM and maximum material thickness.\u003c\/strong\u003e The maker gives none of the three. For a metal cutter those are the numbers that matter, and we will not make them up\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCutting fluid, and the drill in the photographs\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat do I get if I pick both?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eTwo complete sets — one uncoated and one titanium-coated — so ten cutters, ten pilot drills, ten arbors and ten hex keys. The supplier does not sell it as a bundle, so it is simply both sets ordered together and it may arrive as two parcels. It is priced below the two bought separately — the saving is the difference against the crossed-out price above.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is the difference between the two finishes?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe silver set is bare high-speed steel. The gold set is the same cutter with a titanium coating, which in general runs a little cooler and holds an edge longer. \u003cstrong\u003eThis maker publishes no figure for it\u003c\/strong\u003e, so we are not going to tell you it lasts three times as long. If you want the usual answer: coated is worth it if you cut steel often, uncoated is fine for aluminium, plastic and wood.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow thick a material will they go through?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker does not say, and we are not going to guess on a cutting tool. What we can tell you is what it is: an uncoated HSS cup with a pilot. That is a sheet-and-plate tool — electrical boxes, panels, trunking, conduit plates, plywood and board. If you are drilling structural steel, buy a bi-metal or carbide cutter from a brand that prints the number.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDo I need a separate arbor?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. Each of the five arrives as a complete assembly — cutter, arbor, pilot drill, ejector spring and grub screw — and there is a hex key for each one. You are not buying a set of cups that then needs a mandrel.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat is the spring for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIt pushes the slug out. Without it the disc you have just cut sits inside the cup and you spend the next minute poking it out with a screwdriver.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat speed should I run them at?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker gives no RPM. General practice for HSS is slow and steady — the bigger the cutter, the slower — with firm pressure and cutting fluid on steel. Running one fast and dry is the usual way to ruin the teeth on the first hole.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill they cut stainless?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker lists stainless among the materials. Uncoated HSS on stainless is hard work: slow speed, real pressure, and fluid, or it work-hardens and stops cutting. The coated set is the better pick if stainless is why you are buying.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it go through tube or pipe?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, and it is one of the jobs these are good at — a cable entry into a square post, a drain in a tube. Two things change: \u003cstrong\u003eclamp the tube\u003c\/strong\u003e, because a round section wants to spin the moment the teeth bite, and expect the cutter to grab as it breaks through the far wall. Go slower than you would on flat sheet.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use them in a hand drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes, and that is what the photographs show. A corded drill or a decent cordless on its lowest speed. Hold it square — the pilot keeps it centred but it will not keep it straight for you.\u003c\/p\u003e\u003c\/details\u003e\u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eAre the pilot bits replaceable?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes. The pilot sits in the arbor and is held by the grub screw, which is what the hex key is for. The pilot is the part that usually gives up first.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"Uncoated HSS","offer_id":67598320009306,"sku":"NX-HOLESAW-HSS","price":37.95,"currency_code":"USD","in_stock":true},{"title":"Titanium-coated","offer_id":67598319943770,"sku":"NX-HOLESAW-TIN","price":38.95,"currency_code":"USD","in_stock":true},{"title":"Both finishes — one set of each","offer_id":67598324990042,"sku":"NX-HOLESAW-BOTH","price":63.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S592f6b28e60047a782b7cff79c2a935d0_545fed5c-0084-453c-a1e2-fb60a5dfd7e0.webp?v=1790928096"},{"product_id":"cordless-screwdriver-six-bit-nose","title":"Cordless Screwdriver with Six Bits Built Into the Nose — Rechargeable, 3.5 N·m","description":"\u003ch1\u003eSPECIFICATIONS\u003c\/h1\u003e\u003cp\u003e\u003cspan\u003eBattery Included\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eYes\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eBrand Name\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eNONE\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eCertification\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eNONE\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eChoice\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eyes\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDimensions\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003ePower Tool\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eElectrified\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eNo\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 1\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003ePrecise electric screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 10\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eElectric Screwdriver With LED Lights\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 2\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eRechargeable screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 3\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eMini electric screwdriver with LED Lights\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 4\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eMulti-accessory wireless electric screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 5\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eWireless drill\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 6\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eLarge capacity power screwdriver set\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 7\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003ePrecision Equipment Repair Tools\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 8\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003ebattery impact screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFeatures 9\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003ePistol type electric screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFrequency\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eHandle Lithium Battery Power Tool\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eHandheld\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eYes\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eHigh-concerned chemical\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003enone\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMax. Torque\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eScrewdriver Set\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eModel Number\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eElectric Screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMotor\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eBrushless\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMovable\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eYes\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eOrigin\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eMainland China\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePower Source\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eDC,DC\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRated Input Power\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eWireless Screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eRated Voltage\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003e4.8V\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eType\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eMini Screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eUse\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eHome DIY\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWeight\u003c\/span\u003e: \u003cspan style=\"color:#333\"\u003eRechargeable Screwdriver\u003c\/span\u003e\u003c\/p\u003e\u003cdiv class=\"detailmodule_html\"\u003e\u003cdiv class=\"detail-desc-decorate-richtext\"\u003e\n\u003cdiv id=\"offer-template-0\" style=\"text-align: center;\"\u003e\u003cspan style=\"font-size:22px;\"\u003e\u003cstrong\u003e4.8V Electric Screwdriver Set Rechargeable Cordless Screwdriver Powerful Impact Wireless Screwdriver Drill 6 in 1 Tools\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cimg cke-id=\"img90\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S020cf6d27b3940208b55ec67732fabf6z.jpeg\"\u003e\u003cimg cke-id=\"img91\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S98c0fca680e341baaf6d8dcbbe303e95a.jpg\"\u003e\u003cimg cke-id=\"img92\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S49d64e7c77b14890889ff1e304f22088V.jpg\"\u003e\u003cimg cke-id=\"img93\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S6d2c785a08ba414d98596c4bebf2db36k.jpg\"\u003e\u003cimg cke-id=\"img94\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/S4f7ddf95a6744e0da0e884063f4af79dv.jpg\"\u003e\u003cimg cke-id=\"img95\" referrerpolicy=\"no-referrer\" src=\"https:\/\/ae-pic-a1.aliexpress-media.com\/kf\/Sadead99e4ca145b8bbbff7f0b67643e99.jpg\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\u003c\/div\u003e\r\n","brand":"Nexura Tools","offers":[{"title":"Default Title","offer_id":67622814646362,"sku":"NX-SCREWDRV","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S020cf6d27b3940208b55ec67732fabf6z_c624e9a3-cc66-4b28-bd44-3b8fad4cfe5b.webp?v=1791367334"},{"product_id":"digital-angle-finder","title":"Digital Angle Finder with Magnetic Base and Two-Way Laser","description":"\u003cp\u003eA pocket-size digital angle finder that does two jobs: a lit display shows the angle of whatever the tool stands on, and a red laser line from both sides lines up the next part, such as a second drawer slide. Magnets on four sides hold it on iron and steel.\u003c\/p\u003e\n\u003cp\u003eSwitched on, it measures against the horizontal. A short press of ZERO makes the surface it stands on the new zero, for the angle between two parts. The Tilt% \/ HOLD key locks a reading with a short press and switches the display to slope % with a 2-second press.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaker's rated figures:\u003c\/strong\u003e measuring range 4 × 90°, accuracy ±0.2°, repeatability 0.1°, resolution 0.05°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e built-in 3.7 V lithium battery (the maker's figure), charged through a USB Type-C port. Per the maker, it switches itself off after 3 minutes without use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2.4 × 2.4 × 1.2 in (60 × 60 × 30 mm), per the maker's drawing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks in:\u003c\/strong\u003e 14 °F to 122 °F (−10 °C to 50 °C), per the maker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe figures above are the maker's own. We have not bench-tested them. This is not a certified measuring instrument, and the maker mentions no calibration certificate. No certification is claimed for this tool. The maker publishes no laser class, wavelength or output power for this tool, so we do not state one. Never look into the beam or into the side openings, and never point the laser at people, animals, vehicles or aircraft. Not a toy. Keep it out of the reach of children.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"1 angle finder","offer_id":67622901284954,"sku":"NX-ANGLEFINDER","price":54.99,"currency_code":"USD","in_stock":true},{"title":"2 angle finders","offer_id":67623064731738,"sku":"NX-ANGLEFINDER-2","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Se595d7e63fbd4c9caa47d1436e97d510d.webp?v=1791367862"},{"product_id":"pocket-laser-measure-30m","title":"Pocket Laser Measure — 30 m Range, Area and Volume Modes, USB Rechargeable","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eTape measure, minus the tape\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eA tape needs two people and a free hand. This needs a thumb.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eIt is 56 mm long and weighs 25 grams on the maker’s own figure — about the length of your thumb and less than a AA battery. Hold it against the wall behind you, put the red dot on the wall in front, press once. The number lands on the screen, in meters, inches or feet, from 1.2 inches out to 98 feet. Switch modes and the same two or three presses give you an area, a volume, a wall area or a height, worked out for you, with nothing written on the back of your hand.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: the maker contradicts itself twice, and we are not going to pick the flattering version.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eThe laser class.\u003c\/strong\u003e The spec block on the supplier’s own listing gives the hazard level as Class 1, under 1 mW. The body text on the same listing gives Class 2, 630–670 nm, under 1 mW. Those are different things — one claims to be safe under all foreseeable conditions, the other relies on you blinking — and they cannot both be true. \u003cstrong style=\"color:#fff\"\u003eSo this page puts no class on it.\u003c\/strong\u003e What both halves agree on is a visible red laser rated under 1 mW, and the maker molded a warning triangle into the case beside the aperture. Treat it as the stricter of the two: \u003cstrong style=\"color:#fff\"\u003edo not look into the beam and do not point it at anyone’s eyes\u003c\/strong\u003e, including children’s and pets’. Do not bounce it off a mirror at a face.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eThe accuracy.\u003c\/strong\u003e Its spec block says 0.002 m. Its body text says ±0.001 m. We quote the larger, \u003cstrong style=\"color:#fff\"\u003e±2 mm, about 0.08 in\u003c\/strong\u003e, and we will say plainly that neither figure comes with a distance, a target surface, or a word on whether it is typical or worst case. Good enough for rooms, materials and quotes. Not something to sign off against.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWhat we will not print.\u003c\/strong\u003e No charge time, no runtime, no measurements per charge, no auto-off time, no water or dust rating, and no explanation of the switch marked F\/R — the maker publishes none of them. We also do not name the connector on the charging cable, because the only pictures of it are a small line drawing and a 2 mm slot.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-laser-hero.webp\" alt=\"The pocket laser measure on a dark surface with its screen lit, and a close-up of it held in one hand with the red beam on\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e0.03 to 30 m\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eAbout 1.2 in to 98 ft\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eEight modes\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eLength, area, volume, height and two Pythagoras\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e25 g, 56 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eAluminum alloy, with a lanyard loop\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eCharges over USB\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e200 mAh cell built in, cable included\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-laser-face.webp\" alt=\"The front face named: HD display, the measure button, the function switch and the power button, with the eight measuring modes below\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThree controls\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eOne button to measure. Eight ways to count.\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 12px\"\u003eThe front is a screen and three controls, and that is the whole interface. The round button takes the measurement — the maker’s own label for it is “one press to use”. The small switch beside it is marked \u003cstrong\u003eF\/R\u003c\/strong\u003e. The third button turns the meter off.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 12px\"\u003eEverything it can do comes out of those: \u003cstrong\u003esingle\u003c\/strong\u003e for one length, \u003cstrong\u003econtinuous\u003c\/strong\u003e for a readout that keeps updating as you walk, \u003cstrong\u003earea\u003c\/strong\u003e and \u003cstrong\u003evolume\u003c\/strong\u003e for two or three readings multiplied together, \u003cstrong\u003ewall area\u003c\/strong\u003e for several walls at one ceiling height, \u003cstrong\u003eheight\u003c\/strong\u003e, and \u003cstrong\u003etwo Pythagoras modes\u003c\/strong\u003e for a span you cannot stand square to — a ceiling over a staircase, the top of a wall from the floor.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThose eight are the eight printed on the maker’s own diagram, and the eight we will claim. What the F\/R switch selects, it never says, and neither will we.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-laser-lens.webp\" alt=\"The business end: the black panel with its laser warning triangle, the emitter and the receiving window\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe business end\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhere the dot comes from, and where it should not go\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 12px\"\u003eTwo windows behind one black panel: the emitter on the left, the receiver on the right. The triangle above them is the maker’s own, molded into the case — which tells you what it thinks of the thing even while its paperwork argues with itself about the class.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 12px\"\u003eSo the rule is the boring one, and it is the only safety instruction on this page: \u003cstrong\u003ekeep the dot on what you are measuring\u003c\/strong\u003e. Not on a face, not on a windscreen with someone behind it, not into a mirror. The beam is visible, which makes that easy to check.\u003c\/p\u003e\n    \u003cp style=\"margin:0;font-size:15px;color:#5A6472\"\u003eThis photograph is a crop of the maker’s own picture. We cut away its headline and its three claim columns, because we cannot stand behind any of them — and because the maker’s own file cuts the last one off mid-word.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-laser-size.webp\" alt=\"Measured outline: 56 mm long, 22 mm wide, 13 mm thick, with the USB charging cable and the lanyard\" style=\"width:100%;max-width:720px;border-radius:14px;display:block;margin:0 auto 14px\"\u003e\n\u003cp style=\"text-align:center;font-size:14px;color:#5A6472;max-width:720px;margin:0 auto 52px\"\u003e\u003cstrong\u003e56 × 21.5 × 13.5 mm\u003c\/strong\u003e, about 2.2 × 0.85 × 0.53 in, and \u003cstrong\u003e25 g\u003c\/strong\u003e — roughly 0.9 oz. The drawing above is the maker’s own and rounds the two smaller sides to 22 and 13 mm; the figures in bold are the ones from its spec block. It also names the two things in the box beside the meter: a USB charging cable and a lanyard.\u003c\/p\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOne or two\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat the 2-pack actually is\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:820px;margin:0 0 52px\"\u003eTwo complete meters, each with its own charging cable and its own lanyard. Nothing is shared and nothing is left out. It is not a retail twin pack from the factory — the supplier does not build one — so the two are picked and shipped as two singles. They usually travel together, but they may arrive on different days, and that is normal rather than a lost order.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat this will not do\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt has no angle sensor, whatever one of the pictures says.\u003c\/strong\u003e One of the maker’s own graphics is headed “Electronic level \/ Real-time angle display”, and then prints, in smaller type underneath, “(30m models do not have this function)”. This is the 30 m model. There is a second trap in the same set: the screen in its photographs still shows a small figure with a degree sign in the status bar, because that artwork is shared across its whole range. Yours will not do that.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt will not give you a number you can sign off.\u003c\/strong\u003e Two accuracy figures that disagree, no test report behind either, and no conditions attached to the one we quote. For a survey, a building-control measurement or anything that gets checked by someone else, use an instrument that publishes its test.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt stops at 30 m, and it needs a line of sight.\u003c\/strong\u003e Like every laser measure, it wants something to bounce off; very dark, very glossy or very distant surfaces are where any of them struggle. A tape still beats it round a corner and over a curve.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNo runtime figure, so do not plan a day around one.\u003c\/strong\u003e The maker publishes a 200 mAh cell and a charging cable, then publishes no charge time, no runtime, no measurements per charge and no auto-off time. Top it up when you think of it.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe cell is sealed in.\u003c\/strong\u003e Not user-replaceable, which is normal at this size and is also what will eventually end its life. Treat it as a tool with a service life, not an heirloom.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eNo water or dust rating of any kind.\u003c\/strong\u003e Nothing is claimed, so nothing is implied. Keep it dry, and keep it between 0 and 40 °C (32 to 104 °F) while you are using it.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e“CE” is the maker’s word, not a test we have seen.\u003c\/strong\u003e Its spec block says CE and its own bullet claims certification; it prints no certificate, no standard and no test report behind either. We pass that on as its statement and nothing more.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:860px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eWhat it is\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA pocket laser distance meter in an aluminum-alloy shell: a screen, one round measure button, a switch marked F\/R and a power button\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eRange\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e0.03 to 30 m — about 1.2 in to 98 ft\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAccuracy\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eThe maker contradicts itself.\u003c\/strong\u003e Its spec block says 0.002 m, its body text says ±0.001 m. We quote the larger: ±2 mm, about 0.08 in — with no distance, surface or typical\/worst-case condition attached to either figure\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eLaser\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eA visible red laser rated under 1 mW.\u003c\/strong\u003e The spec block calls the hazard level Class 1 and the body text calls it Class 2 at 630–670 nm — both cannot be true, so we claim neither. Do not look into the beam and do not point it at anyone’s eyes\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eModes\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eEight — single, continuous, area, volume, wall area, one-side Pythagoras, two-side Pythagoras and height\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eUnits\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eMeters, inches and feet. The maker lists all three and never says how you switch between them\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAngle or tilt\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e\n\u003cstrong\u003eNone.\u003c\/strong\u003e The maker’s own level-and-angle graphic prints “30m models do not have this function”, and this is the 30 m model\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSize and weight\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e56 × 21.5 × 13.5 mm (about 2.2 × 0.85 × 0.53 in) · 25 g, about 0.9 oz. The maker’s dimension drawing rounds the same body to 56 × 22 × 13 mm, and an older supplier title said 24 g\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eShell\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAluminum alloy — the maker’s own word. No grade, finish or thickness is published\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003ePower\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA built-in 200 mAh lithium cell, charged over USB with the cable supplied. We do not name the connector: the maker never writes it down and no picture of it is legible enough to call\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eTemperature\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eWorks at 0 to 40 °C (32 to 104 °F); store it between −10 and 60 °C (14 to 140 °F). No water or dust rating of any kind\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eCertification\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe maker states CE and prints no certificate, standard or test report behind it. Read it as its statement, not as a tested result\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe meter, a USB charging cable and a lanyard. No case, no pouch, no printed manual, no mains plug\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003ePacks\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne meter, or two separate meters. The supplier does not build a twin pack, so a 2-pack is picked as two singles and the two may arrive on different days\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eOrigin\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eChina, from the maker’s own spec block. The same block prints no brand name at all\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCharge time, runtime, measurements per charge, auto-off time, what the F\/R switch selects, how units are changed, which end of the body a reading starts from, any water or dust rating, and the conditions behind either accuracy figure. The maker gives none of them, so we quote none — and its “golf range: 600 m” attribute is left out too, being twenty times this meter’s own stated range\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow accurate is it, really?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker does not agree with itself: 0.002 m in its spec block, ±0.001 m in its body text. We quote the larger, ±2 mm (about 0.08 in). Neither figure comes with a distance, a target surface, or a word on whether it is typical or worst case, so treat it as a guide for rooms, materials and quotes rather than a guarantee.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the laser safe to use around people?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIts spec block says Class 1 under 1 mW; its body text says Class 2, 630–670 nm, under 1 mW. Those are different claims and they cannot both be right, so we put no class on it at all. What both halves agree on is a visible red laser rated under 1 mW, and the maker molded a warning triangle into the case beside the aperture. Treat it as the stricter of the two: do not look into the beam, do not point it at anyone’s eyes, including children’s and pets’, and do not bounce it off a mirror at a face.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it measure angles or show a level?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNo. The graphic headed “Electronic level \/ Real-time angle display” prints underneath it “(30m models do not have this function)”, and this is the 30 m model. The screen in the maker’s photographs still shows a small degree figure, because that artwork is shared across its whole range — yours will not.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat are the eight modes for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eSingle takes one length. Continuous keeps reading as you move, which is how you find a spot at an exact distance. Area multiplies two readings, volume three. Wall area adds several walls at one ceiling height, for paint and paper. Height and the two Pythagoras modes work out a distance you cannot stand square to — a ceiling over a staircase, the top of a wall from the floor — from two or three readings taken at an angle.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow far does it reach, and in what units?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003e0.03 m to 30 m — about 1.2 inches to 98 feet — in meters, inches or feet. The maker lists all three units and never says how you switch between them. Like any laser measure it needs a clear line of sight and something to bounce off.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eHow long does a charge last?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWe do not know, and we would rather say so. The maker publishes a 200 mAh lithium cell and a USB charging cable, then publishes no charge time, no runtime, no number of measurements per charge, and no auto-off time. Top it up when you think of it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat comes in the box?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe meter, a USB charging cable and a lanyard — the three things named on the maker’s own packing graphic. The cell is already inside. There is no case, no pouch, no printed manual and no mains plug; the cable charges from a laptop, a power bank or a USB adapter you already own.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat does the F\/R switch do?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eNot published, and we are not going to guess on the maker’s behalf. The label “F\/R function switch” appears on its diagram of the front face and is explained nowhere in any of its pictures or its description.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat exactly is in the 2-pack?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eTwo complete meters, each with its own charging cable and lanyard. It is not a factory twin pack, so the two are picked and shipped as two singles — they usually travel together, but they may arrive on different days.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it outdoors?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWithin reason and within 30 m. The dot gets harder to see in bright sun, the maker publishes no figure for range in daylight and no water or dust rating at all, and its working range is 0 to 40 °C (32 to 104 °F). It is an indoor tool that will survive a yard.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process it. Tracking is emailed as soon as the carrier scans the shipment. We ship to US addresses only. Shipping is free on orders of $49 or more; below that it is a flat $4.95. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e with your order number to start a return. \u003ca href=\"\/pages\/returns-refunds\" style=\"color:#E5622A\"\u003eReturns \u0026amp; Refunds\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1 rangefinder","offer_id":67642313965658,"sku":"NX-LASER30","price":44.99,"currency_code":"USD","in_stock":true},{"title":"2 rangefinders","offer_id":67642443235418,"sku":"NX-LASER30-2","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Se9b3e72003dc428e980d7dabeeebbaedQ.webp?v=1791528949"},{"product_id":"universal-self-tightening-wrench-set","title":"Universal Self-Tightening Wrench Set — Two Double-Ended Spanners, 3–22 mm Jaws","description":"\u003ch1\u003eSPECIFICATIONS\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eBrand Name\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eJUSTINLAU\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eChoice\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eyes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eMini\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHigh-concerned chemical\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003enone\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMaterial\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eAlloy,Steel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModel Number\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eas shown\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOrigin\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eMainland China,Mainland China\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSuitable For\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eMetal\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eType\u003c\/span\u003e: \u003cspan style=\"color: #333;\"\u003eCombination Wrench,Box End Wrench\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"detailmodule_html\"\u003e\n\u003cdiv class=\"detail-desc-decorate-richtext\"\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-size: 16px;\"\u003e\u003cstrong\u003e3-17mm8-22mm Universal Torx Wrench Adjustable Multifunction Wrench Board Double-head Multipurpose Torx Spanner Repair Hand Tools\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eDescription:\u003cbr\u003eDouble-headed self-tightening multifunctional wrench.\u003cbr\u003eTime-saving, efficient, convenient, industrial quality.\u003cbr\u003eThe plate body is polished and plated as a whole, which is beautiful and not easy to rust.\u003cbr\u003eSuitable for dismantling screws of various specifications.\u003cbr\u003eIt is widely used in mechanical engineering, machine repair, auto repair and other related maintenance industries.\u003cbr\u003e\u003cbr\u003ePacking list:\u003cbr\u003e1* double-head self-tightening multifunctional wrench.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Se916fa75e190445c9f2e2cff867e6946E.jpg\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S225e5d4dd3554d038b6297703da77937w.jpg\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Sc3103d64f7de442bb5f65ab1d5a087fat.jpg\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S5aebbab53dc84e50bc5b5fc7093610eeH.jpg\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S79c182fc523c4992b14ebd56cb7bce06h.jpg\"\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S3d636a380d964c0189f9ce96d251d066I.jpg\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"Silver","offer_id":67642747027546,"sku":"NX-UNIWR-SV","price":29.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":67642747060314,"sku":"NX-UNIWR-BK","price":29.95,"currency_code":"USD","in_stock":true},{"title":"Black + Silver","offer_id":67642747093082,"sku":"NX-UNIWR-BOTH","price":54.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sa8f4b9b533dd4dc7b6273c7d71a770c8H.webp?v=1791533006"},{"product_id":"digital-angle-ruler-200mm","title":"Digital Angle Ruler — 360° Protractor and 200 mm Rule, USB Rechargeable","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eTwo tools on one hinge\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe angle is already in front of you. This reads it out loud.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA protractor and a rule sharing the same hinge. Open the two blades against the corner, the bracket or the piece of trim you are working on, and the screen gives you the angle to a tenth of a degree — anywhere from 0 to 360°. Both blades carry a 0–200 mm scale in millimeters and inches, so the short measurement that usually sends you back to the toolbox is already in your hand. Tighten the knurled knob and the angle travels with you to the saw.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: this is not a level.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eIt measures the angle \u003cstrong style=\"color:#fff\"\u003ebetween its own two blades\u003c\/strong\u003e. There is no gravity sensor in it, so it does not know which way is down and cannot tell you how far a shelf, a post or a floor leans away from horizontal. If that is the job, the tool for it is a digital angle finder, which is a different thing and which we sell separately.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAnd the accuracy is a formula, not a number.\u003c\/strong\u003e The maker states ±1% + 0.5°. That works out to roughly ±0.9° at 45°, ±1.4° at 90° and ±1.85° at 135° — good enough to match a wall that is not quite square or to put a bracket back the way it came off, and not a calibrated instrument. No test report is published behind the figure.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhat the three buttons do\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 16px\"\u003eThere are three of them and a knob, and that is the whole interface.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eZERO\u003c\/strong\u003e — close the blades on a reference surface and press it. The screen then counts from there, so a second surface reads as the difference instead of a number you have to subtract.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eHOLD\u003c\/strong\u003e — freezes the reading on screen while you take the tool off the work.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eON\/OFF\u003c\/strong\u003e — and it switches itself off after six minutes with nothing pressed, so it is not quietly draining in the bottom of a bag.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eThe knob\u003c\/strong\u003e — tighten it and the blades stop where you left them, so the tool itself becomes the template you mark along.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:46%;color:#5B6270\"\u003eAngle range\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e0–360°\u003c\/strong\u003e in one circle (display carries a running total to 999.9°)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eResolution\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\u003cstrong\u003e0.1°\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eStated accuracy\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e±1% + 0.5°\u003c\/strong\u003e — the maker’s formula\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eRule on the blades\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e0–200 mm\u003c\/strong\u003e, about 0 to 7\u0026amp;frac78; in, millimeters and inches\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eUnits\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eMetric and imperial, switchable on the tool\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eBattery\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e3.7 V, 90 mAh lithium, built in and not user-replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eCharging\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eOver the cable in the box; indicator red while charging, out when full\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eStandby current\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e≤ 30 µA — no charge time or runtime is published\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eAuto power-off\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eAfter 6 minutes idle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eOperating temperature\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e0 to 50 °C, about 32 to 122 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e62 g, about 2.2 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eBody\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eMolded plastic blades with a locking hinge, a hanging hole and a CE mark molded in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eWater resistance\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003eNone claimed — treat it as a dry-hands tool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eEvery figure above is the maker’s own and is not measured by us.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eOne thing we will not promise yet\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eThe maker’s charging graphic says “Type-C Charging” across the top of it. The cable in its own accessory photo looks like an older micro-USB plug, and its written specification only says “supporting direct charging.” Those do not agree, so this page does not name the connector. What is certain: the cell is built in, a charging cable comes in the box, and the light goes red while it charges and out when it is full. We will correct this the moment we can check one in hand.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eIn the box\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eThe ruler, a printed manual, one charging cable and the packing box — the four things the maker’s own accessory graphic names. No case and no pouch. A 2-pack or 3-pack is that many complete rulers, each with its own cable; the maker does not build a multi-pack, so they are picked and shipped as singles and may arrive on different days.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1 ruler","offer_id":67643270692954,"sku":"NX-ANGLERULE","price":34.99,"currency_code":"USD","in_stock":true},{"title":"2 rulers","offer_id":67644166209626,"sku":"NX-ANGLERULE-2","price":59.99,"currency_code":"USD","in_stock":true},{"title":"3 rulers","offer_id":67644166242394,"sku":"NX-ANGLERULE-3","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/a7.png?v=1791542026"},{"product_id":"electric-precision-screwdriver","title":"Electric Precision Screwdriver — Pen-Size, USB-C Rechargeable, 24 to 100 Bits","description":"\u003cp\u003eA screwdriver the size of a pen that turns small screws for you. Hold one button to drive a screw in and the other to back it out; three LEDs at the tip light the screw you are working on. It is made for phones, laptops, game consoles, glasses and other small electronics — not for wall plugs or furniture.\u003c\/p\u003e\n\u003cp\u003eThe motor is gentle on purpose: the maker rates it at 0.25 to 0.35 N·m, so it stalls before it strips a small screw head. For a tight screw, turn the whole driver by hand like an ordinary screwdriver, then let the motor run the screw out.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver only\u003c\/strong\u003e — the driver and its USB-C charging cable. No bits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-bit kit\u003c\/strong\u003e — driver, 24 bits, a magnetizer and a pry tool in a foam-lined box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48-bit kit\u003c\/strong\u003e — driver and 48 bits in a slide-out aluminum case, with tweezers, pry tools, picks, a suction cup and a work mat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-bit kit\u003c\/strong\u003e — driver and 100 bits in a zip pouch, with a flexible extension shaft, tweezers, a brush, pry tools, picks and a screw mat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt-in 350 mAh lithium battery, charged over USB-C in under 50 minutes by the maker's figure. Takes 4 mm hex-shank precision bits. It contains a lithium battery, so it ships by ground.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"Driver only — no bits","offer_id":67644343976026,"sku":"NX-EPSD-DRV","price":50.95,"currency_code":"USD","in_stock":true},{"title":"24-bit kit — boxed","offer_id":67644344008794,"sku":"NX-EPSD-24","price":64.95,"currency_code":"USD","in_stock":true},{"title":"48-bit kit — aluminum case","offer_id":67644344041562,"sku":"NX-EPSD-48","price":101.95,"currency_code":"USD","in_stock":true},{"title":"100-bit kit — zip pouch","offer_id":67644344074330,"sku":"NX-EPSD-100","price":113.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb2a0d47125084444925a77e761e608a5w.webp?v=1791543365"},{"product_id":"board-lifter-hand-jack","title":"Board Lifter Hand Jack — Lever Jack for Drywall, Doors and Cabinets, Lifts to 4 in","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe third hand you keep asking for\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eHold the board. Free the hands.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eSlide the steel plate under the edge of a board, a door or a cabinet, squeeze the lever a few times, and the load creeps up about half a centimeter a notch until it is where you want it — up to \u003cstrong\u003e4 inches\u003c\/strong\u003e. The ratchet holds it there, so both of your hands are free for the shim, the screw or the pencil line. It stands \u003cstrong\u003e18.5 cm\u003c\/strong\u003e tall on a steel foot plate and drops in a tool bag.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: it holds a load, and that is not the same as being safe to work under.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThis is a positioning tool. \u003cstrong style=\"color:#fff\"\u003eIt is not a jack stand and nothing about it is rated for a vehicle.\u003c\/strong\u003e Never put your hands, your head or any part of you beneath something it is carrying. Shim the load, lower it onto the shim, and let something solid hold the weight before you go near it.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAnd the 120 kg is the maker’s number.\u003c\/strong\u003e About 265 lb, with no test standard named, no safety factor given and no report published. We are quoting it because it is the only figure there is, not because we can stand behind it. Keep well inside it.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eHow it works\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 16px\"\u003eThe vertical rail is fixed to the base plate and does not move. The body — the part carrying the pressing plate — climbs that rail, one notch per squeeze, held at each step by the ratchet and reset by a compression spring. That is why the tool is the same 18.5 cm tall whether it is raised or lowered, and why you need about seven inches of clearance to get it under the edge in the first place.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eSet the foot on something solid.\u003c\/strong\u003e The base is about 8 × 6 cm, so it wants a firm floor rather than carpet.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eSqueeze, and watch the load rather than the tool.\u003c\/strong\u003e A few millimeters at a time is the point; 4 inches is the end of the travel.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eShim it, then let it down onto the shim.\u003c\/strong\u003e Keep a hand on the load as it comes down — it does not lower itself slowly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:46%;color:#5B6270\"\u003eLift range\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e0.5 to 10 cm\u003c\/strong\u003e — about 1\/5 in to 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eStated load\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e120 kg\u003c\/strong\u003e, about 265 lb — the maker’s figure, no standard named\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eHeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e18.5 cm, about 7.2 in, unchanged by the lift\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eFoot plate\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eAbout 8 × 6 cm (the maker’s spec block prints 76 mm for the same plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eMetal throughout; the maker names a 10 mm steel rail, a thickened top plate and a thick steel base\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eMechanism\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eLever and ratchet with a compression spring; one squeeze per notch\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eHandle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eSoft rubber sleeve over a steel lever\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eUse beneath a vehicle\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003eNo.\u003c\/strong\u003e This is not a jack stand\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eTest report\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eEvery figure above is the maker’s own and is not measured or tested by us.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eOne or two?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eFor anything longer than about an arm’s length, two — one at each end, so the board comes up level instead of pivoting on its far corner, which is how finished edges get chipped. A single lifter is fine for a door you are hanging, or for one end of something already resting on a trestle. One lifter comes per pack; a 2-pack is two complete tools.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eA note on the name\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eThe maker sells this as a labor-saving arm, a drywall lift, a hand jack, a cabinet jack, a furniture lifter and a height regulator. It is one tool: a lever and ratchet that raises an edge up to 4 inches and holds it. What you call it depends on what you put under it.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"1 jack","offer_id":67671012835418,"sku":"NX-BOARDJACK","price":26.99,"currency_code":"USD","in_stock":true},{"title":"2 jacks","offer_id":67671098818650,"sku":"NX-BOARDJACK-2","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/dasd.png?v=1791801170"},{"product_id":"universal-adjustable-wrench","title":"Universal Adjustable Wrench — Six Self-Setting Jaws for Hex, Square and Round","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eOne head, every shape\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eStop hunting for the right size.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA normal adjustable wrench has two faces and a screw you keep re-setting. This has \u003cstrong\u003esix steel jaws\u003c\/strong\u003e spaced around a round opening. Drop the head over a fastener, close your hand, and all six come inward together — so they meet it on six sides instead of two, and they do not care whether it is \u003cstrong\u003ehex, square or round\u003c\/strong\u003e, metric or imperial.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: the two sizes barely overlap.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe \u003cstrong style=\"color:#fff\"\u003e6 inch takes 7 to 14 mm\u003c\/strong\u003e — M3 up to M8 nuts. The \u003cstrong style=\"color:#fff\"\u003e8 inch takes 12 to 20 mm\u003c\/strong\u003e — M6 up to M12. They meet only between 12 and 14 mm. Buy one and you are choosing which half of the fasteners in your house you can turn; take the pair and you cover 7 to 20 mm with nothing missing in the middle.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAnd there is no torque figure.\u003c\/strong\u003e The maker publishes none, and names no steel grade beyond calling it alloy steel. This is the tool for the fastener you want undone, not for leaning on a seized one with a pipe over the handle.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:46%;color:#5B6270\"\u003e6 inch — clamping range\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e7 to 14 mm\u003c\/strong\u003e — large end 13 mm or an M8 nut, small end 6 mm or an M3 nut\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003e6 inch — size\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e155 mm long, 97 mm across (its dimension drawing says 140 mm long for the same tool)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003e8 inch — clamping range\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e12 to 20 mm\u003c\/strong\u003e — large end 20 mm or an M12 nut, small end 11 mm or an M6 nut\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003e8 inch — size\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e200 mm long, 120 mm across — about 7.87 by 4.72 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eImperial equivalents\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e8 inch: 1\/2, 9\/16, 5\/8, 11\/16, 3\/4 in. 6 inch: about 1\/4 up to 9\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eHead\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eSix jaws riveted into the plate, closing together — nothing to set, nothing to work loose\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eFastener shapes\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eHex, square and round\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eAlloy steel; no grade is published\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eTorque rating\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eEvery figure above is the maker’s own and is not measured by us. Two of them do not agree with each other and are flagged where they appear: the 6 inch length, and an imperial size in the 6 inch list (3\/16 in, which is 4.8 mm — below the 6 mm minimum printed on the same graphic).\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 16px\"\u003eGo by the fastener, not the job.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eUnder 12 mm\u003c\/strong\u003e — bicycles, furniture, small electrical work. That is the 6 inch.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eOver 14 mm\u003c\/strong\u003e — cars, mowers, gate hinges, plumbing. That is the 8 inch.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eBoth, honestly\u003c\/strong\u003e — which is most households, and why the pair is priced below the two on their own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhat it does not replace\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eA socket set. A socket fits one size exactly and will take far more force; this fits a whole band approximately and takes what a hand can give it. What it replaces is the trip back to the toolbox — the one tool that lives in the bike bag, the kitchen drawer or the glovebox for the fastener you did not plan for.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"8 inch","offer_id":67671810048090,"sku":"NX-MAGICWR-8","price":29.99,"currency_code":"USD","in_stock":true},{"title":"6 inch","offer_id":67671810080858,"sku":"NX-MAGICWR-6","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Both sizes","offer_id":67672149590106,"sku":"NX-MAGICWR-SET","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/NexuraTools.png?v=1791803076"},{"product_id":"folding-bow-saw","title":"Folding Bow Saw — Manganese Steel Blade, Aluminum Frame, Storage Pouch","description":"\u003cp\u003eA bow saw that folds down to a flat bar and slides into its pouch. The frame is aluminum, the blade is manganese steel with staggered teeth, and the blade stays covered by the frame when the saw is folded.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e — about 33 cm (13 in) across when open, 16 cm (6.3 in) tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e — 193.9 g (6.8 oz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePacked\u003c\/strong\u003e — folds into a 40 x 5 cm (15.7 x 2 in) pouch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the package\u003c\/strong\u003e — one folding saw and one storage pouch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe maker notes that the catch is a little tight the first time you set the saw up.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"1 saw","offer_id":67680715505754,"sku":"NX-FSAW-M","price":54.95,"currency_code":"USD","in_stock":true},{"title":"2 saws","offer_id":67681129529434,"sku":"NX-FSAW-M-2","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-fsaw-st-01-saw.jpg?v=1791877588"},{"product_id":"profile-scribing-tool","title":"Scribing Tool — Locking Pencil Slide, Pointer and Roller Ends, 23 cm","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eScribe the edge, cut to the line\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eCopy the wall onto the board.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eWalls wander and door casings step in and out, and a tape measure cannot tell you where. This tool can: its pointer rides the real edge while a pencil in the sliding holder draws the same line on the piece you are about to cut, shifted by the distance you set. It is \u003cstrong\u003e23 cm\u003c\/strong\u003e long, about 9 in, with a pointer at one end, a bearing roller at the other and a brass-colored thumb wheel on the slide.\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: the maker publishes one measurement and no instructions.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eThe offset range is not published.\u003c\/strong\u003e Nothing from the maker says how close to the pointer, or how far from it, the pencil can be set. The only figure it gives is the 23 cm overall length.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWe do not promise a pencil.\u003c\/strong\u003e Every one of the maker’s photos shows a plain wooden pencil with the tool, but its listing never lists what is in the pack. Have a pencil of your own ready.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eHow it is used\u003c\/h3\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eSet the offset.\u003c\/strong\u003e Lay the piece where it will go, slide the pencil holder until the pencil is as far from the pointer as the widest gap you have to close, and tighten the thumb wheel.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eFollow the edge.\u003c\/strong\u003e Keep the pointer on the wall, casing or molding and draw the tool along it, holding it at the same angle to the edge all the way.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eCut to the line.\u003c\/strong\u003e The pencil has drawn the edge onto your piece. Cut on the waste side and test the fit before you trim closer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eThat routine is how a scribing tool is used and how the maker’s own photo shows this one, at the foot of a door casing on a floor plank. The maker calls the tool “with lock” and does not say how it locks: its photos show a thumb wheel behind the pencil clamp and a row of fine teeth inside one rail. Check that both the pencil and the slide hold before you mark.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:46%;color:#5B6270\"\u003eOverall length\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e23 cm\u003c\/strong\u003e, about 9 in (the maker’s graphic prints 9.17 inch beside 23 cm; 23 cm is 9.06 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eOffset range\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eNot published by the maker\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eFollowers\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eA thin pointed blade at the head; a pair of small bearings at the tail\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003ePencil holder\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eA sliding carriage with a clamp, a thumb pad and a brass-colored thumb wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eBody\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003ePlastic, by the maker’s listing; orange rails and black ends. No grade is named\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003ePencil\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eShown in the maker’s photos; not listed as included, so not promised\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eNot published by the maker\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eInstructions\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eThe length is the maker’s own figure and is not measured by us. Everything else is described from the maker’s photographs.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eOne tool, or buy 2 get 1 free?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eA scribing tool holds one offset at a time. One tool is enough for a job with one gap to follow. \u003cstrong\u003eBuy 2, get 1 free\u003c\/strong\u003e is three complete tools for the price of two single tools, so the third one is free. Three tools keep three offsets set at once — a wide one for the run along the wall, a tight one for the cuts around door casings and a third for the next piece — so you never have to reset a tool and find the old setting again, and a helper can have one. The order ships free. One tool on its own ships for a flat $4.95 unless the order reaches $49.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"1 tool","offer_id":67682060402778,"sku":"NX-SCRIBE","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Buy 2, get 1 free (3 tools)","offer_id":67682333458522,"sku":"NX-SCRIBE-3","price":59.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S510381882e7048cd8ccf493d33a03b88G.webp?v=1791881497"},{"product_id":"quick-adjust-water-pump-pliers","title":"Quick-Adjust Water Pump Pliers — Push-Button Setting, Smooth Flat Jaws, 7 inch and 10 inch","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eA wrench you squeeze\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eSet it with a thumb. Turn it with a squeeze.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003ePress the button at the joint, slide the jaw up to the nut and let go. The jaw catches on a toothed track and stays at that opening; the handles do the squeezing. The jaw faces are \u003cstrong\u003eflat and smooth, with no teeth\u003c\/strong\u003e, so they sit on the flats of a nut, a valve body or a fitting the way a wrench does. Two sizes, \u003cstrong\u003e7 inch and 10 inch\u003c\/strong\u003e, in black or silver, with red dipped handles.\u003c\/p\u003e\n\n\u003cp style=\"margin:0 0 24px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb71d7c9c2ce6427589a23faf5f1e45ad3.webp\" alt=\"The two sizes side by side, the smaller in black and the larger in silver, both with red dipped handles\" width=\"1200\" height=\"1600\" loading=\"lazy\" style=\"display:block;width:100%;max-width:600px;height:auto;border-radius:14px\"\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: smooth jaws, and plain dipped grips.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eThe maker sells this as water pump pliers, but the jaws have no teeth. \u003cstrong style=\"color:#fff\"\u003eIt is at its best on things with flats\u003c\/strong\u003e — hex nuts, bolt heads, the bodies of valves and fittings. On a smooth round pipe there is nothing to bite with, so do not expect the grip of toothed pliers there.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eThe red handles are not insulated.\u003c\/strong\u003e They are a dipped coating and no insulation rating is published for them. Keep this tool off live wiring.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eHow it works\u003c\/h3\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003ePress the button and slide the jaw\u003c\/strong\u003e until the work just fits between the two faces.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eLet go.\u003c\/strong\u003e The jaw catches on the toothed track and holds that opening. The setting locks; the tool does not clamp itself onto the work, so it is not locking pliers.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eSqueeze and turn.\u003c\/strong\u003e On a hex, sit the faces on two opposite flats, not on the corners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:34%;color:#5B6270\"\u003e \u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:33%\"\u003e\u003cstrong\u003e7 inch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\u003cstrong\u003e10 inch\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e180 mm, about 7.1 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e265 mm, about 10.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eMaximum opening\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e41 mm, just under 1-5\/8 in\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e46 mm, just under 1-13\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eHead thickness\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e12 mm\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e14 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003e217 g, about 7.7 oz\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003e487 g, about 17 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eEvery figure is the maker’s own and is not measured by us. No steel grade, no hardness figure, no load figure and no test report is published. One of the maker’s pictures draws 55 mm across the jaws, which does not agree with either stated maximum; we quote the smaller, stated figures.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eOne size, or the set\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eThe 7 inch is the short, light one for tight places and the tool bag. The 10 inch has the longer handles and opens 5 mm wider. A set is one of each \u003cstrong\u003ein the same finish\u003c\/strong\u003e, for less than the two bought separately — and two pliers let you hold one side of a joint still while you turn the other. The picture of a black one beside a silver one is there to show the two sizes together.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhat you get\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eOne pair of pliers in the size and finish you choose, or two pairs in a set. The maker shows no pouch or case with it. The maker’s own logo is stamped on the head of the tool.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"Black \/ 7 inch","offer_id":67682060763226,"sku":"NX-QUICKPLIER-7-BK","price":41.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ 10 inch","offer_id":67682060697690,"sku":"NX-QUICKPLIER-10-BK","price":54.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ 7 + 10 inch set","offer_id":67682348957786,"sku":"NX-QUICKPLIER-SET-BK","price":81.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 7 inch","offer_id":67682060795994,"sku":"NX-QUICKPLIER-7-SV","price":45.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 10 inch","offer_id":67682060730458,"sku":"NX-QUICKPLIER-10-SV","price":56.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ 7 + 10 inch set","offer_id":67682348990554,"sku":"NX-QUICKPLIER-SET-SV","price":86.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sb71d7c9c2ce6427589a23faf5f1e45ad3.webp?v=1791881498"},{"product_id":"mini-water-pump-pliers-4-inch","title":"Mini Water Pump Pliers — 4 inch, Push-Button Adjust, Toothed or Smooth Jaws","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe pliers that live in a pocket\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eOne button sets the jaw.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eA pair of \u003cstrong\u003e4 inch\u003c\/strong\u003e adjustable pliers. Press the button on the joint, slide the jaw to the size in front of you, let go, and it stays there. It comes with one of two heads, in silver or black: \u003cstrong\u003etoothed jaws\u003c\/strong\u003e that bite, or \u003cstrong\u003esmooth parallel jaws\u003c\/strong\u003e with no teeth.\u003c\/p\u003e\n\n\u003cp style=\"margin:0 0 24px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-minipliers-01.jpg?v=1791883108\" alt=\"A black and a silver pair of mini water pump pliers standing against a steel beam, both with smooth jaws and a red push button\" width=\"790\" height=\"898\" loading=\"lazy\" style=\"display:block;width:100%;max-width:560px;height:auto;border-radius:14px\"\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: the two heads are two different tools.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eToothed jaws\u003c\/strong\u003e are the classic water pump pliers head. Teeth on both jaws dig into what they hold, so they grip round stock, the hook end of a spring or a rounded-off bolt head, and they leave marks. \u003cstrong style=\"color:#fff\"\u003eSmooth jaws\u003c\/strong\u003e are two flat faces that stay parallel as they close. They hold a nut or a finished fitting by its flats, like a small adjustable wrench, and they tend to slip on anything round. One of each covers both, which is why the set of both is priced below the two bought separately.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAnd very little is published.\u003c\/strong\u003e The maker gives a length and a steel. It gives no jaw capacity, no count of positions and no force figure, so we do not print any. This is a tool for holding and turning small things by hand.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"margin:0 0 24px\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-minipliers-12.jpg?v=1791889539\" alt=\"Two mini water pump pliers in silver standing side by side: toothed jaws on the left, smooth parallel jaws on the right\" width=\"1050\" height=\"1024\" loading=\"lazy\" style=\"display:block;width:100%;max-width:560px;height:auto;border-radius:14px\"\u003e\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eSpecifications\u003c\/h3\u003e\n\u003ctable style=\"display:table;width:100%;border-collapse:collapse;font-size:15px;margin:0 0 10px\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;width:34%;color:#5B6270\"\u003eLength\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003e\n\u003cstrong\u003e4 inch\u003c\/strong\u003e, about 100 mm. No dimension drawing is published\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eHeads\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eToothed jaws, or smooth parallel jaws\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eAdjustment\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003ePush button on the joint and a toothed slot: press, slide the jaw, let go\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eSteel\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eCR-V (chrome vanadium) by the maker’s own badge; no grade or hardness figure is published\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eFinish\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eSilver or black. Bare metal handles, no insulation\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eJaw capacity\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eNot published by the maker\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA;color:#5B6270\"\u003eForce rating\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0;border-bottom:1px solid #E3E6EA\"\u003eNone published\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd style=\"padding:10px 0;color:#5B6270\"\u003eIn the box\u003c\/td\u003e\n\u003ctd style=\"padding:10px 0\"\u003eOne pair of pliers, or one of each head in the same finish\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0 0 24px\"\u003eEvery figure above is the maker’s own and is not measured by us. In the maker’s photos the toothed tool in silver has a blue button and every other one has a red button. Expect the maker’s logo printed on one handle of the tool you receive; the photos show that handle blank.\u003c\/p\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhich one do I need?\u003c\/h3\u003e\n\u003cul style=\"margin:0 0 22px;padding-left:20px\"\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eRound, worn or awkward\u003c\/strong\u003e — a pin, the hook end of a spring, a rounded-off bolt head. That is the toothed head.\u003c\/li\u003e\n  \u003cli style=\"margin:0 0 8px\"\u003e\n\u003cstrong\u003eNuts and finished fittings\u003c\/strong\u003e — anything with good flats that you do not want marked. That is the smooth head.\u003c\/li\u003e\n  \u003cli style=\"margin:0\"\u003e\n\u003cstrong\u003eBoth, honestly\u003c\/strong\u003e — which is most toolboxes, and why the set of both is priced below the two bought separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"font-size:22px;font-weight:600;margin:28px 0 10px\"\u003eWhat it does not replace\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 22px\"\u003eFull-size pliers or a wrench. Handles this short give modest leverage, and no force figure is published for the tool. What it replaces is the trip back to the toolbox: the one tool that is already in your pocket when a small fastener needs holding.\u003c\/p\u003e\n\n\u003cp style=\"font-size:13px;color:#5B6270;margin:0\"\u003eFree US shipping on orders of $49 or more, flat $4.95 below that. Delivery in 7–15 business days. 30 days to return unused items in their original packaging.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Nexura Tools","offers":[{"title":"Silver \/ Toothed jaws","offer_id":67682060861530,"sku":"NX-MINIPLIER-T-SLV","price":39.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Smooth jaws","offer_id":67682060894298,"sku":"NX-MINIPLIER-S-SLV","price":47.95,"currency_code":"USD","in_stock":true},{"title":"Silver \/ Both types","offer_id":67682318680154,"sku":"NX-MINIPLIER-SET-SLV","price":73.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ Toothed jaws","offer_id":67682060927066,"sku":"NX-MINIPLIER-T-BLK","price":39.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ Smooth jaws","offer_id":67682060959834,"sku":"NX-MINIPLIER-S-BLK","price":47.95,"currency_code":"USD","in_stock":true},{"title":"Black \/ Both types","offer_id":67682318712922,"sku":"NX-MINIPLIER-SET-BLK","price":73.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sc849f555dbc24e2aa4afb66124b39aaen.webp?v=1791881498"},{"product_id":"3-in-1-tube-bender","title":"3-in-1 Tube Bender — 1\/4, 5\/16 and 3\/8 in Tubing, Bends to 180°","description":"\u003cp\u003eA hand bender for small tubing. The forming wheel has three grooves, one each for 1\/4, 5\/16 and 3\/8 in (6, 8 and 10 mm) outside-diameter tube, so one tool covers the three common small sizes. Angle marks on the wheel run from 0 to 180 degrees.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube sizes\u003c\/strong\u003e — 1\/4, 5\/16 and 3\/8 in OD (6, 8 and 10 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube materials\u003c\/strong\u003e — copper, aluminum, brass and thin steel, per the maker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend angle\u003c\/strong\u003e — any angle up to 180 degrees, with marks at 0, 45, 90, 135 and 180.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e — about 27.5 cm (10.8 in) long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the package\u003c\/strong\u003e — one tube bender.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBend slowly and evenly. The maker does not publish a wall-thickness limit or a bend radius.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"1 bender","offer_id":67684028514394,"sku":"NX-TBEND","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S6238ff2b9068465baf54595e58c6bb9bQ.webp?v=1791889790"},{"product_id":"oil-filter-chain-wrench","title":"Oil Filter Chain Wrench — Adjustable Chain Grip for Stuck Filters, Pipes and Fittings","description":"\u003cp\u003eA chain wrench for oil filters that will not come off by hand. Loop the chain around the filter, pull the slack through the handle, and turn: the pull on the handle draws the chain tight around the can, so it grips harder the harder you turn. Let out more chain for a bigger filter, take it in for a small one.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor\u003c\/strong\u003e — spin-on oil and fuel filters, and other round parts such as pipes and fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e — cast aluminum handle and a steel roller chain, as listed for this design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e — handle about 15 x 5.5 x 1.8 cm, chain about 43 cm, measured by hand by the maker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the package\u003c\/strong\u003e — one chain wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe largest filter it fits is not published. A chain grips by biting, so it can mark a filter: use it to remove filters, not to fit new ones.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"1 wrench","offer_id":67714035843162,"sku":"NX-OCW","price":30.95,"currency_code":"USD","in_stock":true},{"title":"2 wrenches","offer_id":67714199978074,"sku":"NX-OCW-2","price":54.95,"currency_code":"USD","in_stock":true},{"title":"3 wrenches","offer_id":67714200010842,"sku":"NX-OCW-3","price":73.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-lp-ocw-hood.webp?v=1792046393"},{"product_id":"reusable-tile-leveling-system-50","title":"Reusable Tile Leveling System — 50 Cam-Lever Levelers with Steel T-Pins, for 8–13 mm Tile","description":"\u003cp\u003eReusable tile levelers that keep neighboring tiles flush while the mortar cures. Each one has a steel T-pin that slips under the tile edges through the joint, a red base that sits on top of the tiles, and a black cam lever. Flip the lever down and the pin is drawn up, pulling the tile edges level against the base. Flip it up, turn the pin and lift it out to use again.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor\u003c\/strong\u003e — ceramic and porcelain tile 8 to 13 mm thick, floor or wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJoint\u003c\/strong\u003e — the pin sets a 2 mm joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e — base about 2.95 x 2.95 cm (1.16 in), about 6.5 cm (2.55 in) tall with the lever up, lever 17 mm wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e — PP plastic body and lever, steel pin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the package\u003c\/strong\u003e — 50 levelers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nexura Tools","offers":[{"title":"50 levelers","offer_id":67749481480282,"sku":"NX-TLS-50","price":29.95,"currency_code":"USD","in_stock":true},{"title":"100 levelers","offer_id":67749624676442,"sku":"NX-TLS-100","price":54.95,"currency_code":"USD","in_stock":true},{"title":"150 levelers","offer_id":67749624709210,"sku":"NX-TLS-150","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-tls-05-seams.jpg?v=1792316308"},{"product_id":"firewood-splitter-drill-bit-kit","title":"Firewood Splitter Drill Bit Kit — Screw Cone with Square, Round \u0026 Hex Shanks","description":"\u003cp\u003eA threaded steel cone that turns a drill into a firewood splitter. Run it into the end of a log and the thread pulls the cone in and forces the wood apart along the grain. The kit comes with three shanks that screw into the cone, so it fits the drill you already have.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm cone\u003c\/strong\u003e — 32 mm (1.26 in) across, 67 mm (2.6 in) tall, about 95 mm (3.7 in) long with a shank fitted. The maker's split range: logs up to about 10 cm (4 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e42 mm cone\u003c\/strong\u003e — 42 mm (1.65 in) across, 78 mm (3.1 in) tall, about 100 mm (3.9 in) long with a shank fitted. The maker's split range: logs up to about 15 cm (6 in).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShanks\u003c\/strong\u003e — square, round and hex; each 9 mm across and 49 mm long, with a 12 mm threaded end that screws into the cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich shank\u003c\/strong\u003e — square for a rotary hammer, round for a hammer drill, hex for a regular drill chuck.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild\u003c\/strong\u003e — high-carbon steel cone, black finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box\u003c\/strong\u003e — one cone in the size you choose and three shanks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse a drill with real torque at low speed, keep the bit straight into the log, and keep your hands and feet clear of the bit.\u003c\/p\u003e","brand":"Nexura Tools","offers":[{"title":"32 mm \/ 1 set","offer_id":67766033907802,"sku":"NX-WSD-32","price":29.99,"currency_code":"USD","in_stock":true},{"title":"32 mm \/ 2 sets","offer_id":67766619078746,"sku":"NX-WSD-32-2","price":53.99,"currency_code":"USD","in_stock":true},{"title":"32 mm \/ 3 sets","offer_id":67766619111514,"sku":"NX-WSD-32-3","price":76.99,"currency_code":"USD","in_stock":true},{"title":"42 mm \/ 1 set","offer_id":67766033809498,"sku":"NX-WSD-42","price":39.99,"currency_code":"USD","in_stock":true},{"title":"42 mm \/ 2 sets","offer_id":67766619144282,"sku":"NX-WSD-42-2","price":71.99,"currency_code":"USD","in_stock":true},{"title":"42 mm \/ 3 sets","offer_id":67766619177050,"sku":"NX-WSD-42-3","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-wsd-01-hero.jpg?v=1792410537"},{"product_id":"adjustable-claw-hammer","title":"Adjustable Claw Hammer — Magnetic Nail Starter and Contoured Grip, Approx. 13.4 in","description":"\u003cp\u003eAn everyday claw hammer with three details that make a difference: a claw you can reposition, a magnetic side groove to start a nail, and a contoured grip.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable claw\u003c\/strong\u003e — reposition the claw for a different approach to pulling a nail or working around a gap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic nail starter\u003c\/strong\u003e — lay the nail straight in an open groove on either of two opposing sides; the magnetic insert holds it ready for the first tap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured grip\u003c\/strong\u003e — a shaped black and lime handle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e — approx. 34 cm \/ 13.4 in overall, with a head span of approx. 14 cm \/ 5.5 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the pack\u003c\/strong\u003e — 1, 2, 3 or 6 hammers, according to your selection.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nexura Tools","offers":[{"title":"1 hammer","offer_id":67945490120794,"sku":"NX-ACH","price":69.99,"currency_code":"USD","in_stock":true},{"title":"2 hammers","offer_id":67945490153562,"sku":"NX-ACH-2","price":119.99,"currency_code":"USD","in_stock":true},{"title":"3 hammers","offer_id":67945490186330,"sku":"NX-ACH-3","price":169.99,"currency_code":"USD","in_stock":true},{"title":"6 hammers","offer_id":67945490219098,"sku":"NX-ACH-6","price":239.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nx-ach-09-workshop.jpg?v=1793611733"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/collections\/cat-hand-tools.jpg?v=1789123056","url":"https:\/\/nexuratool.com\/collections\/hand-tools.oembed","provider":"Nexura Tools","version":"1.0","type":"link"}