{"product_id":"angle-stop-wrench-set","title":"Angle Stop Wrench Set — Ratcheting 5\/8 and 15\/16 in Supply Nuts, 3\/8 and 1\/2 in MPT Valve Bodies","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eUnder the sink\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eTwo wrenches shaped for the one place a normal wrench cannot swing.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:800px;margin:0 0 20px\"\u003eAn angle stop sits three inches off the wall behind a cabinet panel, with a supply line running out of it and a drain trap in the way. A crescent wrench has nowhere to turn, and pliers round off a chrome nut in two pulls. These two are cut for that space: a \u003cstrong\u003eratcheting angle-on wrench\u003c\/strong\u003e that slips over the supply line and turns the nut in short strokes, and a \u003cstrong\u003edouble-ended socket bar\u003c\/strong\u003e that drops over the valve body itself to hold it still or back it out.\u003c\/p\u003e\n\u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:24px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"margin:0 0 8px;font-weight:600;font-size:17px\"\u003eRead this first: check your four sizes.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003eEverything here is fixed-size, not adjustable-to-anything. The wrench ends take \u003cstrong style=\"color:#fff\"\u003e5\/8 in\u003c\/strong\u003e and \u003cstrong style=\"color:#fff\"\u003e15\/16 in\u003c\/strong\u003e supply nuts. The socket bar takes \u003cstrong style=\"color:#fff\"\u003e3\/8 in\u003c\/strong\u003e and \u003cstrong style=\"color:#fff\"\u003e1\/2 in MPT\u003c\/strong\u003e angle stop bodies. Those are the common American sizes and they cover most stops you will meet — but measure yours before you order rather than after.\u003c\/p\u003e\n  \u003cp style=\"margin:0;color:#D8DCE2\"\u003eThe set is sold one way only, and it is the complete one: both wrenches plus a \u003cstrong style=\"color:#fff\"\u003e1\/2 in compression sleeve puller\u003c\/strong\u003e, two abrasive pads and a pouch. Nothing to choose between, nothing to add later.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8cfd35865a3845ebafedd61e4e0cc2e3A.webp\" alt=\"The full kit: the red angle-on wrench, the black socket bar, the sleeve puller, a pouch and two P180 pads\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eRatcheting\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eShort strokes, no room needed\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eOpen jaw\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eGoes on over the supply line\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eFour sizes\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e5\/8, 15\/16, 3\/8 and 1\/2 in MPT\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e23 and 15 cm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003e9 in and 5.9 in, both flat\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S5b0efc738ce64cacbee7d7d30e195924N.webp\" alt=\"Ends explained: 3\/8 and 1\/2 in MPT valve bodies on the bar, 5\/8 and 15\/16 in supply nuts on the wrench\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhich end does what\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eOne turns the nut, one holds the valve\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe \u003cstrong\u003ered angle-on wrench\u003c\/strong\u003e is the nut tool. Its two ends are ratcheting rings with a slot cut through them, so you feed the supply line in sideways and drop the ring onto the nut — \u003cstrong\u003e5\/8 in\u003c\/strong\u003e on one end, \u003cstrong\u003e15\/16 in\u003c\/strong\u003e on the other. Then it works like any ratchet: swing, click back, swing again, in whatever few degrees the cabinet gives you.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eThe \u003cstrong\u003eblack bar\u003c\/strong\u003e is the valve tool. Both ends are deep sockets sized to the \u003cstrong\u003e3\/8 in\u003c\/strong\u003e and \u003cstrong\u003e1\/2 in MPT\u003c\/strong\u003e threaded bodies of a standard angle stop. Use it to counter-hold the valve while you crank the nut, or to wind the whole stop off the stub-out.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S9177dcb11319497ba0b84718bfa911bdm_7d218474-11f2-4455-9a78-78296d96cda6.webp\" alt=\"Where it is used, and what is in the set: one angle-on wrench and one angle stop wrench\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eCounter-hold\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe habit that saves the pipe in the wall\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe single most expensive mistake on this job is torquing the supply nut without holding the valve. The force goes straight past the stop, into the stub-out, and into a soldered joint you cannot see behind the drywall. You will not know you broke it until you turn the water on.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eTwo tools means two hands doing the right thing: the bar on the valve body going one way, the wrench on the nut going the other, and nothing at all reaching the pipe. That is the real reason a set like this exists rather than a single wrench.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S4c7a31d26e124a35932dde7d6f28d555q.webp\" alt=\"Sizes: 23 cm (9 in) wrench and 15 cm (5.9 in) bar, both flat enough for a toolbag\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe sizes\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eLong enough for leverage, thin enough to get in\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe wrench is \u003cstrong\u003e23 cm (9 in)\u003c\/strong\u003e and the bar \u003cstrong\u003e15 cm (5.9 in)\u003c\/strong\u003e. That is deliberate: the wrench gives you a real handle for a nut that has been on since the house was built, while the bar is short enough to spin in the gap between the valve and the cabinet floor.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eBoth are flat sections rather than round handles, so they sit in a tool bag pocket instead of rolling around a tray. Steel with a lacquered finish — the red one is painted, the bar is coated.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8df3bc93de284649b98877e65c19b34ff.webp\" alt=\"The 1\/2 in compression sleeve puller included in the full kit\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat the full kit adds\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eThe puller, the pads, the pouch\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eGetting the old stop off is half the job; the old \u003cstrong\u003ecompression ring is still swaged onto the copper\u003c\/strong\u003e and will not slide over the end. The full kit includes the \u003cstrong\u003e1\/2 in sleeve puller\u003c\/strong\u003e for exactly that — it seats in the pipe, takes the old nut on its own thread, and draws the ring off, so you keep the stub-out at its original length instead of cutting it back.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eTwo \u003cstrong\u003eP180 abrasive pads\u003c\/strong\u003e come with it for cleaning the copper before the new ferrule goes on, and a pouch to keep the lot together. If you already own a 1\/2 in puller you will end up with a spare, because the set is not sold without it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n  \u003ch2 style=\"font-size:26px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eWhat it will not do\u003c\/h2\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt is not adjustable.\u003c\/strong\u003e Four fixed sizes, and that is the whole range. A 7\/8 in nut, a metric fitting or an oddball import valve will not fit any of the four ends, and forcing a ring onto a nut it does not match is how you round the nut off.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe bar needs a hex on the valve body.\u003c\/strong\u003e Most compression angle stops have one. Some quarter-turn and push-fit valves have a smooth or oddly shaped body, and there the socket has nothing to grip.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eIt does not replace a basin wrench.\u003c\/strong\u003e Faucet mounting nuts up behind the basin are a different tool and a different reach. This set is for the valve and the supply nuts at the wall.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eThe puller in the set is 1\/2 in only.\u003c\/strong\u003e It takes the half-inch compression ferrule off a copper stub-out, which is the usual one at the wall. A 3\/8 in ferrule on the outlet side of a stop needs a different puller, and there is not one in this kit.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eNo torque rating and no steel grade published.\u003c\/strong\u003e The maker gives neither and we will not invent them. It is a hand tool: turn it by hand, do not put a pipe on the end, and if a nut will not move, penetrating oil and patience beat force.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cdiv style=\"background:#1E2532;color:#fff;border-radius:14px;padding:26px 28px\"\u003e\n      \u003cp style=\"color:#F3A26D;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eBefore you start\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eWater off at the main, not just at the stop.\u003c\/strong\u003e The valve you are replacing is the one you have already decided not to trust. Open a low faucet to drain the line, and keep a towel and a bowl under the work.\u003c\/p\u003e\n      \u003cp style=\"margin:0 0 10px;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eAlways counter-hold.\u003c\/strong\u003e Bar on the valve body, wrench on the nut, opposing each other. Never let the turning force reach the stub-out.\u003c\/p\u003e\n      \u003cp style=\"margin:0;color:#D8DCE2\"\u003e\u003cstrong style=\"color:#fff\"\u003eTurn the water back on slowly\u003c\/strong\u003e and watch the joint for a few minutes, then check again an hour later and once more the next morning. If the work needs a licensed plumber where you live, it still does.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S3340b64c11c24844b1b9e1e783444063I.webp\" alt=\"The kit with the angle-on wrench in use on a faucet shank under a sink\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eWhat you get\u003c\/h2\u003e\n\u003cdiv style=\"border-top:1px solid #E3E6EA;margin:0 0 52px;max-width:820px\"\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAngle-on wrench\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRatcheting, slotted ring ends for 5\/8 in and 15\/16 in supply nuts — 23 cm (9 in)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAngle stop wrench\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eDouble-ended socket bar for 3\/8 in and 1\/2 in MPT valve bodies — 15 cm (5.9 in)\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eAlso in the kit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/2 in compression sleeve puller, two P180 abrasive pads and a pouch\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eBuild\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteel, lacquered finish\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eSuits\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eCompression angle stops with a hex body, and the supply nuts either side of them\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eDoes not suit\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eNut and body sizes outside those four, smooth-bodied valves, and faucet mounting nuts\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot included\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eThe replacement valve, new nuts and ferrules, thread tape and a basin wrench\u003c\/div\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 190px;color:#5A6472\"\u003eNot published\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eA torque rating, the steel grade and the ratchet tooth count — the maker gives none, so we quote none\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs the sleeve puller really part of the set?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eYes. Every set on this page is the four-piece kit: the two wrenches, the \u003cstrong\u003e1\/2 in compression sleeve puller\u003c\/strong\u003e, two P180 abrasive pads and the pouch. We do not sell the wrenches on their own.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my valve?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eMeasure the hex on the valve body and the supply nuts. The bar is 3\/8 in and 1\/2 in MPT; the wrench is 5\/8 in and 15\/16 in. Those are the usual American sizes, but there is no adjustable end here to cover anything else.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy not just use an adjustable wrench?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eBecause it does not fit in the space and it does not go on over a supply line that is still attached. The slot in the ratcheting ring is exactly the thing an adjustable wrench does not have.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on chrome supply nuts without marking them?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eA ring on the flats is far kinder than pliers, which is the point. It is still steel on chrome plate, so if the nut is going back on show, go gently and expect faint marks on a nut that fights you.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhat are the two black pads for?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eP180 abrasive. After the old ferrule comes off, the copper stub-out is scored and oxidised where the ring sat. A few seconds with a pad cleans it so the new ferrule seats on a fresh surface.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes the ratchet reverse?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFlip the wrench over. These ratcheting rings work one way per face, so turning the tool upside down changes the direction — there is no lever to switch.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eThe nut will not move at all. Now what?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eStop before something gives. Penetrating oil and twenty minutes, then try again with the valve properly counter-held. If it still will not move, cutting the old stop off and pulling the ferrule is safer than twisting a pipe inside a wall.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eIs this enough to change a shut-off valve on its own?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWith the full kit, yes for the mechanical part — wrenches, puller, abrasive. You still need the new valve with its nut and ferrule, and something to catch the water.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Full kit (4 pieces)","offer_id":44900280598618,"sku":"NX-ANGLESTOP-KIT","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/S8cfd35865a3845ebafedd61e4e0cc2e3A.webp?v=1790235348","url":"https:\/\/nexuratool.com\/products\/angle-stop-wrench-set","provider":"Nexura Tools","version":"1.0","type":"link"}