{"product_id":"right-angle-drill-attachment","title":"105° Right-Angle Drill Attachment — Magnetic 1\/4 in Hex Bit Holder, Short or Extended","description":"\u003cdiv style=\"max-width:1080px;margin:0 auto;color:#1E2532;line-height:1.7\"\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhere the drill will not fit\u003c\/p\u003e\n\u003ch2 style=\"font-size:34px;line-height:1.25;font-weight:600;margin:0 0 16px\"\u003eThe screw is right there. The drill is too long to reach it.\u003c\/h2\u003e\n\u003cp style=\"font-size:17px;max-width:780px;margin:0 0 26px\"\u003eInside a cabinet, between two joists, behind a drawer runner — the screw is in reach of your hand but not of a drill pointing straight at it. This goes in the chuck and turns the drive around the corner: the drill stays pointing along the panel, and the bit comes out of the side of a small head at \u003cstrong\u003e105°\u003c\/strong\u003e, straight into the screw.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sdca0ac0eb3324cc38b0e8f553bda6356l.webp\" alt=\"Driving a screw inside a cabinet with a cordless drill and the right-angle attachment\" style=\"width:100%;max-width:760px;border-radius:14px;display:block;margin:0 auto 22px\"\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:14px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e105° head\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eTurns the drive around the corner\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e1\/4 in hex\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eStandard bits in, standard chuck out\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003eMagnetic socket\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eThe bit stays put when you aim upside down\u003c\/p\u003e\n\u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 200px;background:#F4F5F6;border-radius:12px;padding:18px 20px\"\u003e\n\u003cp style=\"margin:0 0 4px;font-weight:600\"\u003e60 mm or 140 mm\u003c\/p\u003e\n\u003cp style=\"margin:0;font-size:14px;color:#5A6472\"\u003eShort for tight gaps, long for deep ones\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sd8e5569ef8ed42c5969bfd0dd8253a59s.webp\" alt=\"The extended right-angle attachment driving a screw flat against a wooden board\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eWhat it actually does\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eGears in the head, a socket on the side\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe hex shank goes into your drill like any bit. Inside the head, a pair of gears carries the rotation round the bend, and the output is a 1\/4 in hex socket facing sideways. The whole head is about 30 × 20 mm, so it slips into gaps a drill body never will.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eWhy 105° and not a square 90°? With the bit square to the screw, the shaft leans about 15° away from the surface — which is the room your knuckles and the drill body need so they are not dragging along the panel.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;flex-direction:row-reverse;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/Sdaecced99d9f4b34b3769da3f1de5f17y.webp\" alt=\"A PH2 bit held in the magnetic hex socket of the right-angle head\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 340px\"\u003e\n    \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eMagnetic socket\u003c\/p\u003e\n    \u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 14px\"\u003eAny 1\/4 in hex bit, held by a magnet\u003c\/h2\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eThe socket takes the same 1\/4 in (6.35 mm) hex bits as your drill — Phillips, Pozi, Torx, square, nut drivers. It is about 12 mm deep with a magnet at the bottom, so a bit does not fall out when you are working overhead or reaching up under a worktop.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eUse a magnetic bit and the screw hangs on the tip too. That matters more here than on a straight drill, because in the places this goes you usually cannot get a second hand in to hold the screw.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe part nobody tells you\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eHold the head, or it will try to spin\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:center;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 360px\"\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eEvery right-angle head does this and hardly any listing mentions it. When the bit meets resistance, the body of the head wants to turn the opposite way around the drill shaft. Let go of it and it swings round, the bit cams out, and the screw head gets chewed.\u003c\/p\u003e\n    \u003cp style=\"margin:0 0 14px\"\u003eSo hold the body still with your free hand while the drill does the turning. On the short version that means pinching the collar. The extended version comes with a \u003cstrong\u003eremovable grip\u003c\/strong\u003e clipped along the shaft — something to hold that is out of the way of the head, and it lifts off when the gap is too tight for it.\u003c\/p\u003e\n    \u003cp style=\"margin:0\"\u003eStart slow, with the clutch set low. The maker describes it as \u003cstrong\u003enot for high-torque work\u003c\/strong\u003e and recommends it for woodworking — cabinet screws, hinges, drawer runners, brackets — not for lag bolts or deck screws driven flat out.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-extended.jpg\" alt=\"Extended right-angle drill attachment with its removable grip along the shaft\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThree options\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eShort, extended, or both\u003c\/h2\u003e\n\u003cp style=\"max-width:780px;margin:0 0 22px\"\u003eSame head, same socket, same magnet. The difference is how far the head sits from the chuck — and that decides which gaps you can reach.\u003c\/p\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:30px;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-short.jpg\" alt=\"Short right-angle drill attachment, 60 mm\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eShort · 60 mm\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eThe compact one. Keeps the drill close, so it has the most control — right for a gap that is narrow but shallow: between two cabinet sides, a hinge in a corner unit.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-extended.jpg\" alt=\"Extended right-angle drill attachment, 140 mm\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eExtended · 140 mm\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eA long thin shaft puts the head deep inside while the drill stays outside — the back of a base unit, between joists, down beside an appliance. Comes with the removable grip.\u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-set.jpg\" alt=\"Short and extended right-angle drill attachments together\" style=\"width:100%;border-radius:14px;display:block;margin:0 0 14px\"\u003e\n    \u003ch3 style=\"font-size:19px;font-weight:600;margin:0 0 6px\"\u003eSet · short + extended\u003c\/h3\u003e\n    \u003cp style=\"margin:0;color:#4A5058\"\u003eBoth in one order. If you fit kitchens or build flat-pack regularly, you will want the reach of one and the control of the other — often on the same job.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eStraight answers\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eThree things we would rather you knew now\u003c\/h2\u003e\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:26px 28px;margin:0 0 52px\"\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003ePlan on using your own bits.\u003c\/strong\u003e The maker's box shots show the attachments only, with no bits alongside. The bits in the photos are there to show the socket in use. Any standard 1\/4 in hex bit fits.\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 14px\"\u003e\u003cstrong\u003eKeep it off the impact driver.\u003c\/strong\u003e The maker rates it for light, woodworking torque. An impact driver hammers the gears in the head far harder than a drill on a low clutch, and that is the quickest way to strip them.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003eSome of the maker's figures do not agree.\u003c\/strong\u003e The head measures 20 mm across in one of their drawings and 22 mm in another, and the weights (90 g short, 150 g extended) are theirs, not ours. We print the numbers as supplied and say so, rather than pick the flattering one.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eThe specifics\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 16px\"\u003eSizes and fit\u003c\/h2\u003e\n\u003cdiv style=\"display:flex;flex-wrap:wrap;gap:36px;align-items:flex-start;margin:0 0 52px\"\u003e\n  \u003cdiv style=\"flex:1 1 420px\"\u003e\n    \u003cdiv style=\"border-top:1px solid #E3E6EA\"\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eAngle\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e105° between the input shaft and the bit\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eInput\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/4 in (6.35 mm) hex shank — fits drill chucks and quick-release hex holders\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eOutput\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003e1\/4 in hex socket, magnetic, about 12 mm (0.47 in) deep\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eHead\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eAbout 30 × 20 mm (1.2 × 0.8 in); one maker drawing gives 22 mm\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eLength\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eShort 60 mm (2.4 in) · Extended 140 mm (5.5 in)\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eWeight\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eShort 90 g (3.2 oz) · Extended 150 g (5.3 oz), maker's figures\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eMaterial\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eSteel, bright polished finish\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eGrip\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eRemovable grip on the extended version only\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eUse with\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eDrill\/drivers and cordless drills on a low clutch setting; by hand for light screws. Not for impact drivers.\u003c\/div\u003e\n\u003c\/div\u003e\n      \u003cdiv style=\"display:flex;gap:20px;border-bottom:1px solid #E3E6EA;padding:12px 0\"\u003e\n\u003cdiv style=\"flex:0 0 170px;color:#5A6472\"\u003eIn the box\u003c\/div\u003e\n\u003cdiv style=\"flex:1\"\u003eOne short, one extended, or one of each — depending on the option. Bits not shown as included.\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \u003cdiv style=\"flex:1 1 280px\"\u003e\n    \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-spec.jpg\" alt=\"Short attachment 60 mm 90 g and extended attachment 140 mm 150 g side by side\" style=\"width:100%;border-radius:14px;display:block\"\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eQuestions people ask\u003c\/p\u003e\n\u003ch2 style=\"font-size:28px;line-height:1.3;font-weight:600;margin:0 0 8px\"\u003eBefore you order\u003c\/h2\u003e\n\u003cdiv style=\"margin:0 0 44px\"\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWill it fit my drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eIf your drill has a normal three-jaw chuck or a 1\/4 in hex quick-release, yes. The shank is a standard 1\/4 in hex, the same as a driver bit.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it on an impact driver?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eWe would not. The maker says it is not for high-torque work, and the hammering action of an impact driver is exactly what wears out the small gears in the head. A drill\/driver on a low clutch setting is the right partner for it.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eDoes it come with bits?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003ePlan on no. The maker's photos of what ships show the attachments on their own. Your existing 1\/4 in hex driver bits will fit the socket.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhy does the head keep trying to turn?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThat is torque reaction, and every right-angle head has it. Hold the body of the head — or the grip on the extended version — with your free hand while the drill turns the bit. Start slowly and it is easy to control.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I drill holes with it?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eThe maker only talks about driving screws, so treat drilling as a light extra: a small pilot hole in softwood with a 1\/4 in hex-shank bit, at low speed. Large bits, hardwood and metal ask far more of the gears than it is built for.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eCan I use it without a drill?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eFor light wood screws, yes — turn the shank by hand, or with a hex screwdriver handle. It is slower, but useful for the last half-turn when you do not want to over-tighten a hinge.\u003c\/p\u003e\u003c\/details\u003e\n  \u003cdetails style=\"border-bottom:1px solid #E3E6EA;padding:14px 0\"\u003e\u003csummary style=\"cursor:pointer;font-weight:600;font-size:16px\"\u003eWhich option should I buy?\u003c\/summary\u003e\u003cp style=\"margin:12px 0 0\"\u003eShort if your gap is narrow but shallow and you want the most control. Extended if you need to reach deep into a cabinet or between joists. The set if you fit kitchens, wardrobes or flat-pack regularly — you will use both.\u003c\/p\u003e\u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"background:#F4F5F6;border-radius:14px;padding:30px 28px;margin:0 0 24px\"\u003e\n  \u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 10px\"\u003eShipping \u0026amp; returns\u003c\/p\u003e\n  \u003cp style=\"margin:0 0 10px\"\u003e\u003cstrong\u003eDelivery in 7–15 business days\u003c\/strong\u003e from the time you order — that window already includes the 1–2 business days we take to process. Tracking is emailed as soon as the carrier scans the parcel. \u003ca href=\"\/pages\/shipping-delivery\" style=\"color:#E5622A\"\u003eShipping \u0026amp; Delivery\u003c\/a\u003e.\u003c\/p\u003e\n  \u003cp style=\"margin:0\"\u003e\u003cstrong\u003e30-day returns.\u003c\/strong\u003e Items must be unused and in their original packaging. Email \u003ca href=\"mailto:support@nexuratool.com\" style=\"color:#E5622A\"\u003esupport@nexuratool.com\u003c\/a\u003e to start a return.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align:center;padding:26px 0 6px\"\u003e\n\u003cp style=\"color:#E5622A;font-size:12px;letter-spacing:.18em;text-transform:uppercase;font-weight:700;margin:0 0 8px\"\u003eNexura Tools\u003c\/p\u003e\n\u003cp style=\"margin:0;max-width:620px;display:inline-block;font-size:15px;color:#5A6472\"\u003eTools for repair, maintenance and the jobs in between — chosen for specs we can verify.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\n","brand":"Nexura Tools","offers":[{"title":"Short · 60 mm","offer_id":44098259255386,"sku":"NX-ANGLEDRIVE-SHORT","price":10.99,"currency_code":"USD","in_stock":true},{"title":"Extended · 140 mm","offer_id":44098259189850,"sku":"NX-ANGLEDRIVE-EXT","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Set · short + extended","offer_id":44098259222618,"sku":"NX-ANGLEDRIVE-SET","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0761\/2170\/2490\/files\/nexura-angledrive-set.jpg?v=1789551333","url":"https:\/\/nexuratool.com\/products\/right-angle-drill-attachment","provider":"Nexura Tools","version":"1.0","type":"link"}