Digital display · Two-way laser · Magnetic
It fits a pocket and does two jobs: the display reads the angle of whatever it stands on, in degrees or slope %, and a red laser line from both sides lines up the next part, such as a second drawer slide. The maker publishes no laser class, wavelength or output power for this tool, so we do not state one. Never look into the beam or into the side openings, and never point the laser at people, animals, vehicles or aircraft.
The pair is two separate angle finders in one order and may come in more than one package. Free US shipping. Estimated delivery: 7–15 business days from order, processing included. Battery-powered tools tend to arrive toward the longer end of that window.
Digital angle finder + laser line
Stand it on a shelf and read how far off level it sits. Zero it on one part and read the angle to the next. Line up a second drawer slide with the red laser line. It rides in a pocket and charges by USB-C.
How it measures
Switched on, it measures against the horizontal. Press ZERO and it measures from the surface it is standing on instead. Which one you use depends on the job: is the part meant to sit level, or to meet a second part at a set angle?
Switch it on and stand it on the work. The display shows the angle from horizontal. In the maker's diagram a level surface reads 0.00° and one tilted 15° reads 15.00°.
Stand it on the reference surface and short-press ZERO: the display reads 0.00°. Move it to the second surface and the number is the angle between the two. With the saw unplugged, zero on the table, then read the blade.
Any of its four edges will do. Laid flat on its back it has no tilt to read, so the display shows Err; the laser still draws its line along the surface, such as along a tile joint.
The diagram's worked example: zero on a surface at 20°, move to one at 45°, and the display reads 25.00°. The diagram draws the tool in black; the one sold has a silver-gray body.
Specifications
Every figure below is the maker's, taken from its specification table, dimension drawings and product panels.
accuracy
How close a reading is to the real angle.
repeatability
How closely repeat readings of one angle agree.
resolution
The smallest step the display shows.
measuring range
Four quadrants of 90° each, per the maker's table.
square, 1.2 in deep
60 × 60 × 30 mm, from the maker's drawing.
auto shut-off
Switches itself off after 3 minutes without use, per the maker.
* Rated figures are the maker's own. We have not bench-tested them. This is not a certified measuring instrument, and the maker mentions no calibration certificate. No certification is claimed for this tool.
Each pack contains the number of angle finders shown. The maker publishes no contents list, so we do not promise a USB cable or a pouch.
A closer look
The note under each picture adds what the picture leaves out.
A red line leaves the brass-colored opening on each side and runs along the surface behind the tool, to line up a second drawer slide with the first. It follows the tool: tilt the tool and the line tilts with it. Never look into the beam or into the side openings, and never point the laser at people, animals, vehicles or aircraft.
Small enough to hold between a thumb and two fingers and to carry in an apron pocket. It fits where a level has no room: against a drawer slide, on a shelf, on top of a wall outlet's cover plate.
Hold the Tilt% / HOLD key for 2 seconds and the display switches from degrees to slope in percent. A short press of the same key holds the reading, so you can lift the tool out from under a frame or the back of a cabinet and still read it.
Green digits on a lit display show the angle to two decimal places. The maker rates the resolution at 0.05° and the accuracy at ±0.2°, so the second decimal is finer than the rated accuracy.
Using it
Stand it on one of its edges, on top of the part or against its side: on a shelf, along a drawer slide. On iron and steel the magnets hold it there; on wood, tile or aluminum, keep a hand on it.
Move the part and watch the number change. Stop when it reads what the job calls for, or short-press ZERO on a first part and bring the second one to match. If you cannot see the display where the tool sits, short-press Tilt% / HOLD and lift it out.
With its back against a surface, the tool throws its laser line along that surface: across a cabinet side to set two drawer slides, or along a tile joint. How far the line shows depends on the light; the maker gives no figure. Then check the next part by the number.
Compared
Three small tools for lining work up, and what each one does and does not do.
| Feature | This angle finder | Angle gauge, no laser | Small line laser |
|---|---|---|---|
| Shows the angle as a number | |||
| Measures the angle between two parts | Yes, with ZERO | Varies | |
| Reads slope in percent | Varies | ||
| Projects a laser line | Yes, both sides | ||
| Line stays level when the tool tilts | No, it follows the tool | No laser | Varies |
| Holds itself on steel | Yes, four sides | Varies | Varies |
| Recharges by USB-C | Varies | Varies | |
| Fits a pocket | Varies |
Compared by type of tool, not by brand.
Free shipping on orders of $49 or more. Below that, standard shipping is a flat $4.95 to any of the 50 US states. Estimated delivery: 7–15 business days from order, processing included. Battery-powered tools tend to arrive toward the longer end of that window. Shipping & Delivery.
30-day returns. Items must be unused and in their original packaging. Email support@nexuratool.com with your order number to start a return. Returns & Refunds.
30 days from delivery. Email support@nexuratool.com with your order number and what you want to return. We reply with a return address — do not send anything back before you have it, or we cannot match the parcel to your order.
What we can take back: unused items in their original, undamaged packaging. Adhesives, sealants and lubricants cannot be returned once opened; the same goes for any item with a broken safety seal. That is a safety and hazardous-goods rule, not a preference.
Who pays: return shipping is paid by you, except when the item arrived damaged, faulty or was not what you ordered — then we cover it and refund the original shipping too.
Refunds go back to the original payment method within 5–10 business days of the return reaching us. Full returns policy.
QUESTIONS PEOPLE ASK
One angle finder for the toolbox, or the pair so one stays at the saw and one goes out to the job.
Free US shipping · 30-day returns on unused items
