Clear wraparound visor · Vented chin guard · Adjustable strap
A clear visor that wraps from your brow round under your chin, a vented chin guard whose grille lifts out, and an elastic strap to hold it on — so sawdust, grit, dust, wind and splashes land on the visor instead of your face, while you see straight through it and keep both hands on the work. Read this first: the maker publishes no impact rating, no filtration figure and no safety standard. That makes this a dust and splash barrier — not rated eye protection, not a respirator, and never for welding.
Every shield is complete with its own strap, and the shop sells them in packs rather than one at a time. On 3 + 1 free and 5 + 2 free the free ones are the same shield, not a lesser version, and those two packs ship free; the two-pack ships for a flat $4.95 because it comes in under $49. The maker's package line lists a shield and a strap only, so we do not promise a filter pad with any of them. A pack may arrive in more than one parcel.
Clear, wraparound, hands-free
A clear visor that wraps from your brow round under your chin, a vented chin guard, and an elastic strap to hold it on. Sawdust, grit, wind and splashes hit the visor instead of your face, you look straight through it, and both hands stay on the job.
The chin guard
A flip-down visor on a headband hangs open at the bottom. This one closes under your chin with a vented grille: the frame carries on round under your face, and the curve there is perforated. The grille and its gasket frame lift out — the maker calls that insert a replaceable filter element, and one of its photos shows a pad between the two, though no pad is on its package list. The grille lets air in and out under the visor; what a pad would do to that air, the maker does not publish.
The strap holds it, so there is nothing to put down and pick up again — the whole argument against holding a shield up to your face.
The grille is perforated, so the space behind the visor is not sealed at the bottom. The maker's own picture draws air rising through the chin and calls it smooth ventilation; we have nothing to measure that with.
The grille and its frame lift out — the maker's words are “easy disassembly” and “replaceable filter element”. Its photo also shows a pad, but no pad is on its package list, so we do not promise one, and the shop does not sell refills.
The maker gives no filtration figure for the insert or for any pad, and this is not a respirator.
The specifics
Where the maker gives a figure, it is printed here and marked as the maker's. Where it gives nothing — and on this product that includes an impact rating and a filtration figure — this page says “not published” rather than filling the gap.
across the brow
From the maker's drawing. It asks you to allow 2–3 mm either way.
brow to chin
The same drawing, which also gives 110 mm across the chin.
weight
The maker's own figure, printed as “about 200g”.
impact rating published
No ANSI Z87.1 or EN 166 marking anywhere in the maker's material.
filtration figure published
Nothing on what the chin insert or any pad stops, or for how long.
no tint, no shade
Good for seeing your work. Never for welding or torch cutting.
* Marked figures are the maker's own and are not measured by us.
A clear wraparound face shield in a black frame, with a vented chin guard that comes apart and an adjustable elastic strap. It carries no impact rating, no filtration figure and no safety standard.
The maker's own package line reads “1 * Face shield, 1 * Adjustable strap”. A filter pad is not on it, so we do not promise one. A combo is that many shields, each with its own strap, and may arrive in more than one parcel.
Where it earns its keep
The first four cards are the kind of work it is for: dust, grit, wind and splashes coming at your face while both hands are busy. The last is where it does not belong — read it twice.
A sander, a saw or a router throws fine dust straight up at whoever is leaning over it. The visor keeps it off your face, and because it is clear you can still see the line you are working to. Saws and routers can throw chips too, so wear rated safety glasses under it.
Drilling a ceiling or cutting plasterboard above your head drops dust straight down into your face. A visor that wraps under the chin keeps it off your mouth and nose as well as your eyes; if the bit can throw chips, wear rated safety glasses under it. Breathing the dust is a separate question — see the last card.
Sweeping out a garage, clearing up after a job, working outside on a windy day: dust and grit fly at face height, and the visor keeps them off your skin. Where anything could fly hard enough to hurt, wear rated safety glasses under it. Keep it away from hot sparks — they can mark a plastic visor, and the maker publishes no heat figure.
Hosing down a patio, washing out bins, rolling paint onto a ceiling — the spray and the drips land on the visor, and the visor rinses clean. The maker lists anti-liquid, anti-dust, anti-wind and anti-sand among what it is for.
Welding or torch cutting: it is clear, with no shade at all. Corrosives, solvents or anything with a hazard label: it has no splash rating. Medical or clinical work: it is not medical protective equipment. Jobs where something can come at you hard — chainsaws, strimmers, a cutting disc that could break, hammering on steel — because it carries no impact rating. And dust you should not breathe calls for a respirator rated for it; the chin filter element has no published figure.
Putting it on
Seat the chin guard under your chin, bring the visor up over your face and take the strap round the back of your head. The frame runs down past your cheeks, so the shield sits round your face rather than hanging off a headband.
The elastic strap adjusts on a slider buckle. Snug enough that it stays put when you lean over the work, not so tight that the frame presses.
The maker shows the shield under running water and calls it easy to clean, but publishes no cleaning instructions, so this is our advice: lift out the grille, its frame and any pad, then mild soap, water and a soft cloth. Keep solvents and scouring pads off the visor.
That is the whole product: nothing to charge and nothing to set. The one thing to keep in mind is what it is not. It carries no impact rating and no filtration figure, so wear rated safety glasses under it when a chip could fly, and a respirator rated for the dust when the dust itself is the problem.
Compared with the usual options
Three things people reach for when the work gets dusty. They cover different parts of you, and none of them does every job — which is why the rows about impact and about breathing matter more than the rest.
| Feature | Nexura clear face shield | Safety glasses | Disposable dust mask |
|---|---|---|---|
| Covers eyes, nose, mouth and chin | Eyes only | Nose and mouth only | |
| Wraps round the sides of the face | Depends on the model | ||
| A published impact rating | Depends on the model | ||
| Rated to filter what you breathe | Depends on the mask's rating | ||
| A published safety standard | Depends on the model | Depends on the model | |
| Catches water and paint splashes in front of the face | Yes — no splash rating | Not designed for splashes | |
| People can see your whole face | |||
| Both hands free | |||
| Reusable | Usually single-use | ||
| Rinses clean |
Compared by type, not by brand. “Depends on the model” means it varies by the one you buy. Nothing here is a safety rating; this shield carries none.
Free shipping on orders of $49 or more. Below that, standard shipping is a flat $4.95 to any of the 50 US states. Delivery takes 7–15 business days from the time you order, and that window already includes the 1–2 business days we take to process. Shipping & Delivery.
30-day returns. Items must be unused and in their original packaging. Email support@nexuratool.com with your order number to start a return. Returns & Refunds.
30 days from delivery. Email support@nexuratool.com with your order number and what you want to return. We reply with a return address — do not send anything back before you have it, or we cannot match the parcel to your order.
What we can take back: unused items in their original, undamaged packaging. Adhesives, sealants and lubricants cannot be returned once opened; the same goes for any item with a broken safety seal. That is a safety and hazardous-goods rule, not a preference.
Who pays: return shipping is paid by you, except when the item arrived damaged, faulty or was not what you ordered — then we cover it and refund the original shipping too.
Refunds go back to the original payment method within 5 business days of the return reaching us. Full returns policy.
QUESTIONS PEOPLE ASK
Clear visor · Vented chin guard · Adjustable strap
Two shields, or a pack where the extra shields come free and so does shipping. A clear barrier for dust, grit, wind and splashes — no impact rating, no filtration figure, and never for welding. Free US shipping from $49, and 30 days to return unused items.
