Sewer jetter nozzle with a 1/4-inch quick-connect plug, next to its brass quick coupler
Nozzle about 5.6 cm (2.2 in) long, brass coupler about 3 cm (1.18 in), both 1/4-inch quick connect
Two sets: two nozzles and two brass couplers
Three sets: three nozzles and three brass couplers
Five sets: five nozzles and five brass couplers
How it connects: threaded 1/4-inch hose end, brass coupler, then the quick-connect nozzle
Close-up of the front jet and the ring of rear jets
Indoor sewer, toilet, outdoor sewer and sink drains
For grease, sand and debris clogs in sewer lines, drains and pipes

Sewer lines · Floor drains · Sinks

Sewer Jetter Nozzle + Brass Quick Coupler

  • Rear jets pull the hose down the pipe
  • Front jet breaks into the clog ahead
  • Brass coupler turns a threaded hose end into a click-on fitting

Click it onto a jetter hose, feed it into the drain and let your pressure washer do the work.

How many sets

Each set is one nozzle and one brass coupler. Bigger packs may arrive in more than one parcel.

1 set Total $29.99
+ $4.95 shipping, free from $49

One nozzle and one coupler for the drains at home.

  • Free US shipping from $49
  • 30-day returns on unused items
  • Delivery in 7–15 business days

Slow drain? Clogged sewer line?

Let water pressure clear the clog.

Put this nozzle on a jetter hose and run it from your pressure washer. Jets on the back drive the hose through the pipe and scour the walls, and the jet up front breaks into the blockage.

Sewer jetter nozzle with a 1/4-inch quick-connect plug, next to its brass quick coupler
  • 1/4-inch quick connect
  • Brass coupler included
  • Rated to 5000 PSI
How it connects: threaded 1/4-inch hose end, brass coupler, then the quick-connect nozzle

Why the brass coupler

Thread it on once. Click the nozzle in and out.

Many jetter hoses end in a 1/4-inch male thread. The brass coupler screws onto that thread and turns the end of the hose into a quick-connect socket. After that, the nozzle clicks in, and slides back out when you pull the collar. No wrench, and no fresh thread tape every time you change tips.

  • Change tips by hand

    Leave the coupler on the hose and swap between this nozzle and other 1/4-inch quick-connect tips in seconds.

  • Tighten the thread once

    The hose thread is sealed one time, not every job, so it is not worn down by screwing tips on and off.

  • Fine without it, too

    If your pressure washer wand already has a 1/4-inch quick-connect socket, the nozzle plugs straight in and the coupler is a spare.

The coupler has a 1/4-inch female thread. Check that your hose ends in a 1/4-inch male thread. Thread sealing tape helps it seal.

How to use it

Thread, click, feed, spray.

Indoor sewer, toilet, outdoor sewer and sink drains
  1. Fit the coupler

    Wrap the 1/4-inch male thread on the hose with sealing tape and screw the brass coupler on tight.

  2. Click in the nozzle

    Pull back the collar on the coupler, push the nozzle plug in and let go. Give it a tug to check it is locked.

  3. Feed the hose in

    Push the nozzle and a foot or two of hose into the drain before you turn the water on.

  4. Spray and work it

    Start the pressure washer. The rear jets pull the hose forward. Feed it in slowly and work it back and forth through the clog.

Feed the nozzle into the pipe before you squeeze the trigger, and let go of the trigger before you pull it out. Wear eye protection.

The specifics

Straight answers

Every figure here is the maker's own.

5.6cm*

nozzle length

About 2.2 in.

3cm*

coupler length

About 1.18 in.

1/4in

quick connect

Plug on the nozzle, socket on the coupler.

5000PSI*

max pressure

The maker's rating.

* Marked figures are the maker's own and are not measured by us.

Nozzle about 5.6 cm (2.2 in) long, brass coupler about 3 cm (1.18 in), both 1/4-inch quick connect

Full specifications

Sewer jetter nozzle with a 1/4-inch quick-connect plug, plus a brass quick coupler.

Nozzle
About 5.6 cm (2.2 in) long, with a 1/4-inch quick-connect plug.
Jets
One front jet and a ring of rear jets.
Coupler
About 3 cm (1.18 in). Quick-connect socket on one end, 1/4-inch female thread on the other. Check your hose thread first.
Max pressure
Up to 5000 PSI. The maker's rating. Stay within your pressure washer's own rating.
Material
Steel nozzle, brass coupler. The maker lists the nozzle as stainless steel.
Use with
A pressure washer and a sewer jetter hose with a 1/4-inch fitting. Not included.

In the box

  • 1, 2, 3 or 5 sets, each a nozzle and a brass coupler, depending on the pack

A pressure washer and a jetter hose are not included.

Where it goes

Sewer lines, floor drains, sinks.

What the nozzle does, from the maker's own photos.

Close-up of the front jet and the ring of rear jets

Jets front and back

The rear jets push the nozzle forward and scrub the pipe walls. The front jet cuts into the clog.

Indoor sewer, toilet, outdoor sewer and sink drains

Indoor and outdoor drains

Floor drains, sewer cleanouts and sink lines, with a hose long enough to reach the clog.

For grease, sand and debris clogs in sewer lines, drains and pipes

Grease, sand and gunk

Made for soft clogs: grease, fine sand and gravel, and everyday waste.

How it connects: threaded 1/4-inch hose end, brass coupler, then the quick-connect nozzle

Hose, coupler, nozzle

Three parts and one click. The coupler stays on the hose.

Nozzle about 5.6 cm (2.2 in) long, brass coupler about 3 cm (1.18 in), both 1/4-inch quick connect

Small and simple

About 5.6 cm (2.2 in) long, with nothing to set up.

Compared with the usual options

Jetter nozzle, drain snake, or chemicals?

Three common ways to clear a clogged drain.

FeatureThis jetter nozzleDrain snakeChemical cleaner
Scours the pipe walls, not just a hole Partly
Runs on your pressure washer
No harsh chemicals in the pipe
Reaches far down the lineWith a long hose
Use it again on the next clog

Compared by method, not by brand.

Free shipping on orders of $49 or more. Below that, standard shipping is a flat $4.95 to any of the 50 US states. Delivery takes 7–15 business days from the time you order, and that window already includes the 1–2 business days we take to process. Shipping & Delivery.

30-day returns. Items must be unused and in their original packaging. Email support@nexuratool.com with your order number to start a return. Returns & Refunds.

30 days from delivery. Email support@nexuratool.com with your order number and what you want to return. We reply with a return address — do not send anything back before you have it, or we cannot match the parcel to your order.

What we can take back: unused items in their original, undamaged packaging. Adhesives, sealants and lubricants cannot be returned once opened; the same goes for any item with a broken safety seal. That is a safety and hazardous-goods rule, not a preference.

Who pays: return shipping is paid by you, except when the item arrived damaged, faulty or was not what you ordered — then we cover it and refund the original shipping too.

Refunds go back to the original payment method within 5 business days of the return reaching us. Full returns policy.

QUESTIONS PEOPLE ASK

Before you order

Is a hose included?

Will it fit my pressure washer?

What does the brass coupler do?

Can I use a garden hose?

What clogs does it clear?

Is it safe to use?

How long does delivery take, and can I return it?

Sewer lines · Floor drains · Sinks

Let water pressure clear the clog.

A 1/4-inch jetter nozzle with a brass quick coupler. Free US shipping from $49, and 30 days to return it unused.